The Transmitter Solutions TRALUN318DOPW1K-C is a Luna programmable one-button keychain transmitter operating at 318 MHz. Transmitter Solutions documents this transmitter for programmable telephone entry, security, and access control systems using a compatible 318 MHz frequency receiver.
The transmitter uses a DoorKing MicroCLIK compatible protocol and is manufactured with a factory-set serial number. It must be programmed into the compatible system memory before use. This is not a DIP-switch transmitter.
The TRALUN318DOPW1K-C sends a factory-numbered 318 MHz wireless credential to a compatible receiver. The one-button W1K-C version provides Button A for the authorized receiver or access-control function assigned by the installed system.
The transmitter code, facility code, receiver programming, and access permissions must match the way the property or access control system is administered. Matching 318 MHz frequency alone does not guarantee compatibility.
The current Transmitter Solutions product page specifically lists MicroCLIK 8066-080 compatibility for TRALUN318DOPW1K-C. Current DoorKing product reference documentation identifies 8066-080 as the one-button MicroCLIK transmitter.
This one-button relationship is important because DoorKing separately identifies 8067-080 as a two-button MicroCLIK transmitter and 8068-080 as a three-button MicroCLIK transmitter. Confirm the required button count and receiver system before ordering.
The Luna is a Transmitter Solutions product using a MicroCLIK compatible protocol. Do not assume it is the same packaged DoorKing product as 8066-080. The documented relationship is radio and credential compatibility for the applicable system.
The current Transmitter Solutions Luna manual specifically states that the RECTSWIE318-D receiver operates with the TRALUN318DOP transmitter family. The receiver provides a 26-bit Wiegand format output for access control equipment equipped to accept 26-bit Wiegand input.
The TRALUN318DOPW1K-C transmitter itself does not have a wired Wiegand connection. It sends its 318 MHz credential to the compatible receiver. The receiver provides the documented Wiegand interface to the access control panel.
Confirm that the access control system accepts 26-bit Wiegand and that the applicable facility code, transmitter serial number, user record, and access permissions are correctly configured.
Each TRALUN318DOP transmitter is manufactured and sold with a different factory-set serial number. The transmitter must be programmed into the receiving system memory before use.
For an HOA, gated community, apartment property, commercial site, storage facility, or other managed access system, verify the required facility code and transmitter-number arrangement before ordering additional remotes. The property administrator or access control provider may require transmitters from an assigned credential range.
A transmitter can have the correct 318 MHz frequency and still fail to operate if its credential information has not been authorized in the system.
The current Transmitter Solutions Luna manual contains conflicting capacity figures. The general product description states that the transmitted code includes a 14-bit security code allowing up to 16,384 combinations and 6 bits of facility code allowing up to 64 facility codes.
The technical specification table in the same manual instead lists 65,536 combinations and 16 facility codes. The current model-specific cut sheet lists 16,384 combinations and 64 facility codes.
Because the official manufacturer documents conflict, verify the actual facility code and serial-number requirements for the installed access system. Do not order managed transmitter blocks based only on a published combination count.
The TRALUN318DOPW1K-C includes the Transmitter Solutions ChargeGuard three-color battery-status circuit.
The manufacturer troubleshooting information identifies reduced operating range as a reason to replace the transmitter battery. An illuminated ChargeGuard LED does not confirm that the transmitter is enrolled in the access system or that the receiver is compatible.
The current Luna family manual identifies three TRALUN318DOP button configurations:
The W1K-C suffix identifies the exact one-button model. Confirm the number of access functions required before changing to a two-button or four-button version.
TRALUN318DOPW2K-C and TRALUN318DOPW4K-C belong to the same documented Luna MicroCLIK compatible family but provide two and four physical buttons. Do not substitute another button configuration without checking the receiver programming and required access functions.
Other Luna transmitters may also operate at 318 MHz while using a different protocol suffix or receiver family. Match the complete part number, not just the Luna housing and frequency.
The Luna family is available in combo transmitter versions with proximity credential support. Transmitter Solutions identifies combo configurations for HID, Mango, AWID, and Securakey protocols. Do not assume the standard TRALUN318DOPW1K-C includes a proximity coil or proximity credential.
318 MHz DIP-switch transmitters are not automatic replacements for this programmable MicroCLIK compatible transmitter. Fixed-code DIP-switch systems use a different coding and programming method.
| Feature | Specification |
|---|---|
| Brand | Transmitter Solutions |
| Product Family | Luna |
| Part Number | TRALUN318DOPW1K-C |
| Product Type | Programmable wireless keychain transmitter |
| Operating Frequency | 318 MHz |
| Number of Buttons | 1 |
| Button | Button A, red |
| Protocol | DoorKing MicroCLIK compatible |
| Programming Type | Programmable into compatible system memory |
| Transmitter Numbering | Factory-set serial number |
| Documented Receiver | RECTSWIE318-D |
| Receiver Output Format | 26-bit Wiegand through RECTSWIE318-D |
| DoorKing Compatibility Reference | MicroCLIK 8066-080 one-button transmitter application |
| Battery | 1 x 12V 23A or A23 battery |
| Documented Battery Life | 18 to 24 months |
| Battery Status Feature | ChargeGuard three-color LED |
| Code Combinations | Manufacturer documents conflict: 16,384 in the general description and model cut sheet; 65,536 in the manual specification table |
| Facility Codes | Manufacturer documents conflict: up to 64 in the general description and model cut sheet; 16 in the manual specification table |
| Operating Temperature | -20 F to 131 F (-20 C to 55 C) |
| Overall Dimensions | 2.51 x 1.52 x 0.58 inches |
| Weight | 1 oz. (20 g) |
| FCC ID | SU7318TRS8 |
| Warranty | 24 months from transmitter manufacturing date per manufacturer manual |
The biggest ordering mistake with this transmitter is matching only 318 MHz. The TRALUN318DOPW1K-C uses a MicroCLIK compatible credential protocol and a factory-set serial number. Check the receiver, facility code, and managed-system credential requirements before ordering. Also verify the W1K-C suffix because this is the one-button version. The W2K-C and W4K-C models are different button configurations.
The transmitter must be programmed into the memory of the compatible receiver or access control system. Use the enrollment instructions for the exact installed receiver, telephone entry system, or access control platform.
Do not attempt to program this transmitter by copying DIP-switch positions. Each transmitter has a factory-set serial number. Managed properties should add the transmitter through the authorized credential-management procedure for the site.
The manufacturer specifies one 12V 23A or A23 battery. Battery access is through the rear battery door after removing the fixing screw. Install the replacement battery with the polarity shown in the transmitter battery compartment.
If the LED illuminates but the system does not respond, verify that the transmitter has been programmed into system memory. If operating range is reduced, the manufacturer recommends replacing the transmitter battery. Receiver antenna, radio interference, or access control system faults may also require diagnosis.
Do not bypass photo eyes, monitored safety edges, entrapment protection, emergency access, door reversal systems, or operator safety circuits while troubleshooting a transmitter or receiver problem. If the receiver, Wiegand wiring, access control panel, or gate operator has an unclear electrical or safety-circuit fault, have the system inspected by a qualified gate or access control technician.
Yes. The current Transmitter Solutions product page specifically lists MicroCLIK 8066-080 compatibility for TRALUN318DOPW1K-C. Current DoorKing product reference documentation identifies 8066-080 as its one-button MicroCLIK transmitter. Verify the installed 318 MHz receiver and facility-code requirements before ordering.
The current Luna family manual specifically identifies the RECTSWIE318-D receiver as operating with the TRALUN318DOP transmitter family. That receiver provides a 26-bit Wiegand output for access control equipment equipped to accept 26-bit Wiegand input.
Transmitter Solutions lists compatibility with 318 MHz DoorKing, Monarch, Stingray, RCS, and Chameleon transmitter applications. The installed receiver must still support the compatible transmitter protocol and credential format, so verify the receiver model and facility-code requirements before ordering.
No. The transmitter is programmable and is manufactured with a factory-set serial number. It must be enrolled into compatible system memory. Do not use DIP-switch programming instructions from a different 318 MHz transmitter family.
The manufacturer specifies one 12V 23A or A23 battery with a documented battery life of approximately 18 to 24 months. Reduced operating range is a manufacturer-listed reason to replace the transmitter battery.
Yes. The transmitter includes a ChargeGuard three-color battery-status LED. Green indicates normal battery level, orange indicates an attention level with reduced remaining battery service, and red indicates a low battery that should be replaced.
The current Luna manual contains conflicting figures. Its general description and model cut sheet identify 16,384 code combinations and up to 64 facility codes, while the manual specification table lists 65,536 combinations and 16 facility codes. Verify the required facility code and transmitter credential range for the actual access system before ordering managed transmitter blocks.
Do not assume the standard TRALUN318DOPW1K-C includes a proximity credential. Transmitter Solutions states that the Luna family is available in combo versions with a proximity coil for HID, Mango, AWID, or Securakey protocols. Verify the exact combo transmitter part number when proximity access is required.