The Transmitter Solutions TRARAY433TSPW1V is the Gate Openers Unlimited catalog SKU for the Stingray transmitter identified by Transmitter Solutions as model 433TSPW1V. This is a programmable one-button visor transmitter in the Transmitter Solutions 433 MHz long-range radio family.
The manufacturer documents this model for compatible Wiegand 26-bit programmable telephone entry systems, anti-burglar systems, and access control systems operating with a compatible 433 MHz radio input. Current and applicable Transmitter Solutions receiver documentation also positively identifies the one-button Stingray with multiple HIVE and legacy receiver platforms.
The 433TSPW1V sends an individually numbered wireless credential to a compatible 433 MHz or 433.92 MHz receiver. The transmitter has one maroon Button A for the authorized receiver function assigned by the installed radio or access control system.
This is not a DIP-switch transmitter. The exact transmitter manual documents a factory-set sequence number and facility code. The facility code and sequence number must be programmed into compatible system memory.
One physical button normally provides one authorized transmitter function. The connected receiver or access control system determines what that function operates.
Transmitter Solutions receiver documentation identifies compatible receiver applications that include:
For lighting, industrial equipment, or other electrical loads, do not directly switch an unknown mains-voltage or high-current load through a receiver relay without verifying the relay rating and using the proper electrical interface. A qualified access control or electrical technician should handle unclear load requirements.
Current Transmitter Solutions HIVE-1000 documentation specifically lists one-button, two-button, and four-button 433 MHz Stingray transmitters as compatible. This positively includes the one-button Stingray transmitter family used by 433TSPW1V.
The HIVE-1000 simultaneously operates at 318 MHz and 433.92 MHz. Manufacturer specifications identify Keeloq Hopping Code security support and separate memory capacity for 512 transmitters at 318 MHz and 512 transmitters at 433.92 MHz.
HIVE-1000 pairing and receiver management are handled through the manufacturer's Bluetooth mobile app for iOS or Android. The receiver supports Classic and Rapid programming modes.
The Transmitter Solutions HIVE500 PLUS 433 manual specifically lists Stingray 433TSPW1V as a compatible transmitter. The receiver operates at 433.92 MHz, uses Keeloq Hopping Code security, provides two relays, and stores up to 500 transmitters.
The HIVE500 PLUS programming menu can add a transmitter and assign transmitter buttons to receiver relays. Because 433TSPW1V has only Button A, verify the required relay function before programming.
The HIVE500 PLUS manual specifically states that a master transmitter must have two or more buttons to program both receiver relays through the remote master-transmitter procedure. The one-button 433TSPW1V should not be selected as the master transmitter when remote programming of both HIVE500 PLUS relays is required.
The Transmitter Solutions HIVE DX receiver sell sheet specifically lists Stingray 433TSPW1V as a compatible transmitter. HIVE DX is a two-channel 433.92 MHz rolling-code receiver designed for automatic door applications.
The HIVE DX provides six operating modes, including dual independent outputs, switching network operation, vestibule sequencing, and latching modes. It supports up to 800 transmitters.
A one-button Stingray can be enrolled as a compatible radio transmitter, but the HIVE DX receiver programming and selected operating mode determine the actual door function.
The RECTSMINI2OUT MINI 2 OUT receiver manual specifically identifies Stingray 433TSPW1V and 433TSPW2V as usable transmitters. The receiver operates at 433.92 MHz with Keeloq Hopping Code security and has two output relays.
The MINI 2 OUT manual associates Button A with its first documented transmitter relay programming step and Button B with the second. Because the 433TSPW1V is a one-button transmitter, verify that the application only requires the Button A function. Do not assume the one-button model can provide both button assignments documented for the two-button Stingray.
Transmitter Solutions documents 433 MHz Stingray transmitters as compatible accessories for its HIVE Wiegand Receiver in the 433 MHz long-range configuration. The receiver provides Wiegand output and is documented as compatible with 26-bit devices.
The 433TSPW1V transmitter itself does not have a wired Wiegand connection. It sends its radio credential to the compatible receiver. The HIVE Wiegand receiver provides the wired Wiegand interface to the telephone entry or access control system.
A control panel with a Wiegand input does not automatically contain a compatible Stingray radio receiver. Verify the receiver model and 433 MHz configuration.
The HIVE Wiegand Dual Band receiver documentation lists 433 MHz Stingray transmitters as compatible accessories. The receiver uses plug-in frequency modules and supports two selected radio frequencies from the manufacturer's documented frequency options.
The Dual Band receiver documents 26-bit or 30-bit Wiegand output. Verify that the installed receiver contains the correct 433 MHz frequency configuration before ordering a 433TSPW1V.
The applicable Transmitter Solutions PULSE manual lists the TRA433TSPWXV Stingray transmitter family as an optional system accessory. The PULSE platform documents a 433.92 MHz AM/ASK radio receiver using Keeloq Hopping Code security.
PULSE programming uses transmitter serial-number and facility-code information and allows radio transmitter buttons to be associated with system relays and time-zone settings. Because the PULSE documentation is an older manufacturer system reference, verify the exact installed PULSE hardware and software generation before ordering replacement transmitters for an existing site.
The exact 433TSPW1V cut sheet identifies this model as a long-range transmitter and lists a free-space range of 60 to 120 yards. The manufacturer transmitter manual identifies the technical operating frequency as 433.92 MHz.
Actual installed range may be reduced by receiver antenna placement, metal operator cabinets, buildings, large magnetic fields, radio interference, and other site conditions. Compatible receiver manuals repeatedly identify antenna location and interference as important to radio performance.
Do not replace the transmitter solely because range has decreased. Check the 23A battery, receiver antenna, receiver placement, and radio environment.
The exact transmitter manual documents a 16-bit security code with 65,536 combinations and an 8-bit facility-code field supporting up to 256 facility codes. Each transmitter is manufactured and sold with a different factory-set sequence number and facility code.
The credential information must be programmed into compatible system memory. For HOA, apartment, gated community, commercial, parking, or other managed access applications, confirm the required facility code and transmitter-number arrangement before ordering additional transmitters.
A transmitter can operate at the correct frequency and still fail to activate the system if its credential has not been authorized in the receiver or access control system.
The 433TSPW1V is the one-button Stingray visor transmitter. The manufacturer documents the following related models:
The exact model manual identifies the one-button transmitter control as Button A. Confirm that the installation only requires the authorized function assigned to Button A before replacing a two-button or four-button remote with the one-button model.
The official Transmitter Solutions MAGLOC880 manual specifically identifies 433TSPW2V and 433TSPW4V as compatible radio transmitters. The one-button 433TSPW1V is not listed in that MAGLOC880 compatibility section.
Do not order TRARAY433TSPW1V as a MAGLOC880 replacement transmitter without separate manufacturer confirmation for the installed hardware generation.
433TSPW2V and 433TSPW4V are related Stingray models with two and four buttons. They are different button configurations and may be required when a receiver uses more than one transmitter button or relay assignment.
433TSPW1K-C is a programmable Monarch 433 MHz one-button keychain transmitter. It is a separate Transmitter Solutions transmitter family and should not automatically be treated as the same product as the Stingray 433TSPW1V.
TRALUN433TSPW4K-C is a Luna programmable 433 MHz keychain transmitter. It is a different transmitter family and button configuration.
433TSD21V2, 433TSD22V2, 433TSD21K3, and 433TSD22K3 are Transmitter Solutions 433 MHz DIP-switch transmitter models. Fixed-code DIP-switch transmitters are not automatic replacements for the programmable Stingray 433TSPW1V.
| Feature | Specification |
|---|---|
| Brand | Transmitter Solutions |
| Product Family | Stingray |
| Catalog SKU | TRARAY433TSPW1V |
| Manufacturer Model | 433TSPW1V |
| Product Type | Programmable wireless visor transmitter |
| Operating Frequency | 433 MHz product family; exact technical manual identifies 433.92 MHz |
| Number of Buttons | 1 |
| Button Identification | Button A |
| Button Color | Maroon |
| Mounting Style | Visor model |
| Programming Type | Programmable into compatible system memory |
| Transmitter Numbering | Factory-set sequence number and facility code |
| Code Combinations | 65,536 |
| Facility Codes | 256 |
| Modulation | AM / ASK |
| Battery | 1 x 12V type 23A alkaline battery |
| Documented Battery Life | 12 to 18 months |
| Current Consumption | 20 mA |
| Rated ERP | 50 to 100 mW per transmitter manual |
| Documented Free-Space Range | 60 to 120 yards |
| Operating Temperature | -4 F to 131 F (-20 C to 55 C) |
| Overall Dimensions | 3.26 x 1.88 x 0.62 inches |
| Weight | 1 oz. (20 g) |
| FCC ID | SU7433TSPWV |
| Warranty | 60 months from transmitter manufacturing date per manufacturer manual |
The manufacturer specifies one 12V type 23A alkaline battery as the required transmitter power source. The current product page and model cut sheet do not clearly list every retail package component. Confirm current package contents when battery inclusion or a specific visor mounting accessory is required.
The main ordering mistake with the 433TSPW1V is matching only "433 MHz" and "1 button." This Stingray uses a programmable credential with a factory-set sequence number and facility code. Check the receiver model and credential requirements before ordering. Also remember that the one-button model can have functional limitations in a two-relay receiver installation. The HIVE500 PLUS manual requires a transmitter with two or more buttons to act as the master for remote programming of both relays, and the MINI 2 OUT manual uses separate A and B button assignments for its two relay programming steps.
The transmitter facility code and factory-set sequence number must be programmed into compatible system memory. Use the programming procedure for the exact installed receiver or access control system.
HIVE-1000 transmitter management is performed through the manufacturer's Bluetooth app. HIVE500 PLUS 433 uses its receiver programming menu and serial-number handling. HIVE DX and RECTSMINI2OUT use their own receiver-specific enrollment procedures. PULSE programming uses facility-code and transmitter serial-number information.
Do not attempt to program the 433TSPW1V by copying DIP-switch positions. The transmitter does not use a DIP-switch code bank.
If the transmitter red LED does not illuminate, the manufacturer troubleshooting section directs the user to replace the transmitter battery. If the LED is on but the system does not receive the signal, verify that the transmitter credential has been programmed into the system. Reduced operating range is also a manufacturer-listed reason to replace the battery.
Do not bypass photo eyes, monitored safety edges, entrapment protection, emergency access, fire access, door reversal systems, or operator safety circuits while troubleshooting a transmitter or receiver problem. For automatic doors and access control systems, required emergency release and life-safety functions must remain operational. Unclear receiver wiring, Wiegand faults, operator inputs, or electrical load requirements should be inspected by a qualified gate, garage door, automatic door, or access control technician.
TRARAY433TSPW1V is the supplied catalog SKU, while Transmitter Solutions identifies the Stingray transmitter itself as model 433TSPW1V. Verify the exact model and compatible 433 MHz receiver before ordering.
Yes. Current Transmitter Solutions HIVE-1000 documentation specifically lists one-button 433 MHz Stingray transmitters as compatible. The transmitter must be added through the applicable HIVE-1000 app programming procedure.
Yes. The HIVE500 PLUS 433 manual specifically lists Stingray 433TSPW1V as a compatible transmitter. Because it is a one-button model, verify the required relay assignment. The receiver manual requires a transmitter with two or more buttons to act as the master for remote programming of both relays.
Official manufacturer documentation identifies HIVE DX and RECTSMINI2OUT as compatible with 433TSPW1V. The HIVE Wiegand Receiver and HIVE Wiegand Dual Band documentation also list 433 MHz Stingray transmitter support when the receiver has the compatible 433 MHz configuration.
Do not assume compatibility. The applicable Transmitter Solutions MAGLOC880 manual specifically lists 433TSPW2V and 433TSPW4V as compatible transmitters and does not list the one-button 433TSPW1V. Confirm compatibility before ordering it for a MAGLOC880 system.
No. The 433TSPW1V is a programmable transmitter with a factory-set sequence number and facility code. The credential must be programmed into compatible receiver or access control system memory.
The manufacturer specifies one 12V type 23A alkaline battery with documented battery life of approximately 12 to 18 months. The model cut sheet and transmitter manual list a free-space range of 60 to 120 yards, although actual installed range can be reduced by antenna placement, structures, and radio interference.
No. Frequency and button count alone do not establish compatibility. Verify that the receiver supports the Stingray programmable credential format and the required facility code and transmitter sequence number. DIP-switch, Monarch, Luna, and other 433 MHz transmitter families are not automatic replacements.