The Miller Edge PAH-093 polyurethane air hose is small 3/32 in. inside-diameter tubing used in select Air-Wave air-line applications. It is typically chosen where the original Miller Edge assembly used polyurethane lead tubing rather than silicone or gum rubber hose.
PAH-093 should be matched to the original tubing material and size. Using the wrong tubing can change the air response, create fitting leaks, or prevent the switch from adjusting correctly.
| Manufacturer | Miller Edge |
|---|---|
| Product Type | Polyurethane air hose |
| Part Number | PAH-093 |
| Application | Small-diameter Air-Wave lead hose and treadle tubing |
| Material | Polyurethane |
| Size | 3/32 in. inside diameter |
| Length | 100 ft. |
| Compatible Switch Family | AW10, AW12A, and AW14 Air-Wave systems when configured for 3/32 in. tubing |
| Monitoring Type | Non-monitored system component |
| Notes | Match original tubing material, diameter, and fittings |
Do not choose PAH-093 based only on the outside appearance of the tubing. Silicone, polyurethane, gum rubber, and hard rubber hose can be used in different parts of an air-edge system and may not seal the same way.
A non-responsive Air-Wave or pneumatic edge can create a serious entrapment hazard. If replacing tubing does not restore consistent operation, have the complete edge and control circuit inspected before returning the operator to service.
A: PAH-093 is 3/32 in. polyurethane air hose used in select Miller Edge Air-Wave lead hose and treadle applications.
A: No. PAH-093 is polyurethane tubing and SAH-093 is silicone tubing. Match the original material unless the system documentation allows a change.
A: Yes, when the Air-Wave system is designed for 3/32 in. polyurethane tubing.
A: No. RAH-500 is 1/2 in. gum rubber hose used in larger air hose systems, while PAH-093 is 3/32 in. polyurethane tubing.
A: No. It is tubing only and must be used with the correct edge, switch, fittings, and operator safety circuit.