The EMX TRES-900-HT is a removable passive UHF RFID credential for automatic vehicle identification, gated access, parking management, fleet entrances, and other vehicle-access applications. It hangs from the vehicle's rear-view mirror and is read by a compatible EMX Patriot UHF RFID reader.
The tag does not require a replaceable battery. A compatible reader supplies the radio-frequency energy needed for the tag to return its programmed credential information.
TRES-900-HT identifies the general EMX hang-tag family. The complete part number is needed to identify the tag size, graphics, and printed-number configuration.
| Part Number | Documented Configuration |
|---|---|
| TRES-900-HT350-C | Custom-graphics passive UHF hang tag measuring approximately 3.50 x 3.50 x 0.003 inches |
| TRES-900-HT600-C | Custom-graphics passive UHF hang tag measuring approximately 6.0 x 2.125 x 0.04 inches |
| TRES-900-HT600-G | Passive UHF hang tag with generic EMX graphics, approximately 6.0 x 2.125 x 0.04 inches |
| TRES-900-HT600-GN | Passive UHF hang tag with generic EMX graphics and no printed number, approximately 6.0 x 2.125 x 0.04 inches |
| TRES-900-HT600-W | Plain-white passive UHF hang tag without standard graphics, approximately 6.0 x 2.125 x 0.04 inches |
The base TRES-900-HT number does not establish the graphics, printed numbering, electronic credential encoding, or package quantity. Confirm the complete suffix and order details before purchasing.
A compatible Patriot reader transmits UHF radio energy into the vehicle lane. The passive hang tag receives that energy and returns its stored credential data. The reader then sends the decoded information to an access controller or applies the reader's configured tag-filtering function.
The access-control system determines whether the credential is authorized based on its format, facility code, credential number, assigned access level, schedule, and reader location. The hang tag does not contain an internal gate relay, user database, or access schedule.
Exact compatibility depends on the reader's regional frequency, firmware, enabled tag format, credential encoding, Wiegand configuration, facility code, and connected access controller.
The TRES-900-HT family is intended for compatible North American EMX Patriot readers operating in the 902-928 MHz UHF band. Patriot reader documentation identifies compatible hang tags as UHF EPC Gen2 credentials.
Frequency compatibility alone is not enough. The credential data must also match the reader and access-control system.
Verify the following before ordering:
A tag may be detected by the Patriot reader but still be rejected by the access controller. This commonly occurs when the tag uses the wrong Wiegand format, facility code, credential number, or electronic encoding.
Do not order a large tag quantity based only on the appearance of an existing hang tag. Verify the electronic credential data and reader settings first.
Unlike a permanently bonded windshield tag, the TRES-900-HT can be removed from the rear-view mirror and transferred when permitted by the property's access policy.
The ability to move the tag does not automatically mean that sharing is authorized. Property managers may assign each credential to a specific resident, employee, vehicle, account, or parking permit.
Do not leave the tag where it blocks the driver's view. Position or remove it as required to comply with applicable vehicle and windshield-obstruction rules.
EMX specifies that hang tags must hang vertically from the rear-view mirror. Do not rotate the tag sideways or place it flat on the dashboard.
Vertical orientation is especially important with the linear-polarized PATRIOT-L reader. The PATRIOT-L is designed to read vertically oriented credentials.
The circular-polarized PATRIOT-E can read compatible credentials in more than one orientation, but a TRES-900-HT should still hang vertically as intended.
For best performance, the face of the reader and the broad face of the hang tag should remain as parallel as practical when the vehicle enters the read zone. A severe reader angle or a tag turned edge-on toward the reader can reduce range.
Vehicle windshield angle, rear-view mirror position, driver-side versus passenger-side reader placement, and the direction of travel should be considered when aiming the reader.
Read range is determined by the complete reader-and-tag system rather than the hang tag alone. EMX publishes an average site-dependent range of approximately 18-25 feet for PATRIOT-E and PATRIOT-L readers and approximately 6-10 feet for the PATRIOT-MR.
These distances should not be guaranteed at every installation. Actual range can be affected by:
Test a programmed production tag with each reader before distributing the full credential order. Drive the vehicle through the lane and verify reliable operation at both the first intended read point and the normal stopping point.
The credential should still read where the vehicle will wait if the gate has not opened. A tag that reads only after the vehicle passes the intended stopping position may require reader repositioning, aiming, RF adjustment, or a different lane layout.
| Specification | Details |
|---|---|
| Manufacturer | EMX Industries |
| Product Family | TRES-900-HT |
| Product Type | Removable passive UHF RFID vehicle hang tag |
| Reader Frequency Family | Compatible North American 902-928 MHz Patriot systems |
| Credential Technology | Passive UHF EPC Gen2 credential |
| Battery Required | No |
| Standard HT600 Dimensions | Approximately 6.0 x 2.125 x 0.04 inches |
| Custom HT350-C Dimensions | Approximately 3.50 x 3.50 x 0.003 inches |
| Mounting Method | Hangs vertically from a vehicle rear-view mirror |
| Permanent Adhesive | No |
| Reusable or Transferable | Physically removable; transfer is subject to the site's credential policy |
| Required Orientation | Vertical |
| Long-Range Patriot System Range | Approximately 18-25 feet with compatible PATRIOT-E or PATRIOT-L systems, site and tag dependent |
| PATRIOT-MR System Range | Approximately 6-10 feet, site and tag dependent |
| Available Graphics | Generic EMX, generic without printed number, plain white, or custom graphics depending on suffix |
| Credential Programming | Must match the reader and access-control system |
| Package Quantity | Not established by the base TRES-900-HT family number; verify the exact product listing |
Custom graphics, electronic encoding, printed numbering, proofs, lead times, and minimum quantities should be confirmed before the order is placed.
Similar appearance, frequency, or EPC compatibility does not confirm matching Wiegand data, facility codes, credential-number ranges, reader settings, or access-controller compatibility.
Hang the credential vertically from the rear-view mirror with the broad face directed as parallel as practical toward the reader as the vehicle approaches.
Do not cut, punch, drill, laminate, fold, or otherwise modify the RFID portion of the tag unless the modification is specifically approved by EMX. Physical damage can reduce range or make the credential unreadable.
Keep the tag away from loose metal objects, liquids, and positions where it is pressed against the windshield or dashboard without testing. Store unused tags in a clean, dry location and protect them from bending or crushing.
A Patriot reader that beeps but does not open the gate may be detecting the hang tag correctly. Check the Wiegand format, facility code, credential enrollment, access schedule, reader assignment, controller wiring, gate relay, and operator input before replacing the tag.
If range is poor with one vehicle, confirm that the tag hangs vertically and faces the reader. Also check the rear-view mirror position, windshield angle, reader side of the lane, RF power, reader aiming, and nearby metal or concrete.
The TRES-900-HT is an access credential, not a vehicle-presence or safety device. It must not replace loop detectors, photo eyes, safety edges, monitored inputs, emergency access equipment, fire access, or other required gate-safety devices.
The tags are intended for compatible EMX Patriot UHF RFID readers, including select PATRIOT-E, PATRIOT-L, and PATRIOT-MR systems. Verify the reader frequency, firmware, credential format, and tag encoding before ordering.
HT600-G has generic EMX graphics, HT600-GN has generic graphics without a printed number, and HT600-W is a plain-white version without standard graphics.
No. It is a passive UHF RFID credential powered by radio-frequency energy from the compatible Patriot reader.
EMX specifies that the tag should hang vertically from the rear-view mirror. Keep its broad face as parallel as practical to the reader during the vehicle's approach.
The tag is physically removable and can be transferred, but the property's access policy may assign it to a specific person, account, or vehicle. Confirm authorization before sharing or transferring it.
Range depends on the complete reader-and-tag installation. EMX publishes approximately 18-25 feet for compatible PATRIOT-E and PATRIOT-L systems and 6-10 feet for PATRIOT-MR, but actual range is site dependent.
The reader may detect the tag while the access controller rejects its data. Check the Wiegand format, facility code, credential enrollment, access schedule, reader assignment, controller wiring, and gate relay.
No. The base number identifies the hang-tag family. Confirm the complete suffix, graphics, printed numbering, package quantity, credential format, facility code, and number range before ordering.