The Genie 107311.0001.S is a Flasher Module (FS127) designed for Genie commercial door operators. #8 screw mount - 18 AWG 6-inch leads for wiring connection. Solid-state flasher module that converts a steady warning lamp to a flashing signal for pre-close warning on commercial door operators.
| Feature | Specification |
|---|---|
| Model | Genie 107311.0001.S |
| Item Type | Flasher Module (FS127) |
| Voltage | 24VAC, 120VAC |
| Contact Configuration | Solid-state output: 1A fullwave or 2A halfwave |
| Mounting | #8 screw mount - 18 AWG 6-inch leads for wiring connection |
| Alternate Part Numbers | 107311.0001.S |
A: The FS127 flasher connects to the pre-close warning contacts on a timer-to-close expansion board or auxiliary expansion module and converts a steady lamp signal to a flashing output to warn personnel before the door closes.
A: The FS127 accepts 24VAC or 120VAC input (+/- 15%) at 50 or 60 Hz. Ensure your warning circuit voltage matches one of these ratings before installation.
A: The default flash rate is 75 FPM +/- 20%. It can be field-adjusted within a range of 45 to 150 FPM to suit site-specific warning requirements.
A: The FS127 is rated for operation from -20 deg C to 60 deg C (-4 deg F to 140 deg F), making it suitable for both indoor and typical outdoor commercial installations.
A: The FS127 mounts with a single #8 screw and connects via 18 AWG 6-inch leads. Secure the leads to the pre-close warning output contacts on the expansion board and fasten the module body to the operator chassis or enclosure.