Products [1832]
Genie
Genie Garage Door Opener Remotes, Keypads, Receivers & Parts
Genie products are used with garage door openers, access control radio systems, and select compatible gate or receiver setups where a remote, keypad, receiver, wall console, safety sensor, or replacement opener part is needed. At Gate Openers Unlimited, this page helps customers find Genie remote controls, wireless keypads, radio receivers, wall consoles, safety sensors, circuit boards, drive parts, and related garage opener accessories.
When choosing a Genie product, start with the opener model number and the radio system being used. A Genie remote, wireless keypad, wall console, safety sensor, receiver, or circuit board is not selected by appearance alone. Compatibility depends on the opener model, manufacturing date, frequency, coding technology, button count, receiver type, wiring, and whether the product is being used with a garage door opener or a compatible gate receiver.
Genie Garage Opener and Radio Control Products
Genie is well known for garage door openers and replacement accessories such as remotes, wireless keypads, wall consoles, push buttons, safety sensors, receivers, circuit boards, and opener repair parts. Genie also offers universal radio control products that may work with select garage door opener and gate receiver systems when the correct compatibility requirements are met.
For homeowners, technicians, and property managers, Genie products are often used to replace a lost remote, add a wireless keypad, repair a garage opener, replace a wall console, upgrade an older receiver, or restore safe operation to a garage door opener. For gate applications, only select Genie radio control products may apply, and the receiver, frequency, and coding style must be verified before ordering.
Shop Genie by Product Type
- Garage door opener remote controls
- Wireless garage door keypads
- Wall consoles and push buttons
- Radio receivers and receiver kits
- Universal remotes and universal accessories
- Photo safety sensors and replacement beams
- Garage opener circuit boards
- Drive carriages, couplers, gears, and rail parts
- Extension kits and opener accessories
- Select gate-compatible radio control accessories
Common Genie Product Families
| Product Family | Common Use | Ordering Notes |
|---|---|---|
| Genie Intellicode Remotes | Replacement remote controls for compatible Genie garage door openers | Confirm Intellicode compatibility, button count, frequency, and opener model before ordering. |
| Genie Wireless Keypads | Keyless entry for compatible Genie garage door openers | Verify keypad model, opener compatibility, Intellicode or fixed-code support, and programming requirements. |
| Genie Universal Remotes | Remote control replacement for select Genie and other compatible garage or gate receiver systems | Check the compatibility chart, receiver type, frequency, and coding technology before ordering. |
| Genie Receivers and Receiver Kits | Adding or replacing radio control capability on compatible openers or access systems | Confirm receiver power, relay output, wiring, frequency, and the opener or gate controller input. |
| Genie Wall Consoles and Push Buttons | Interior control for garage door opener operation | Match Series II, Series III, universal, or wired push-button requirements to the opener model. |
| Genie Safety Sensors | Photo-eye style safety sensing for compatible garage door openers | Verify opener compatibility, sensor style, wiring, alignment, and whether both sending and receiving sensors are required. |
| Genie Circuit Boards | Replacement logic boards for select Genie garage door openers | Match the board number, opener model, manufacture date, motor type, and wiring before ordering. |
| Genie Drive and Rail Parts | Repair parts for screw drive, chain drive, belt drive, and rail assemblies | Confirm opener series, rail type, carriage style, coupler, sprocket, belt, chain, or screw drive compatibility. |
How to Choose the Right Genie Product
Start by locating the Genie opener model number. On many garage door openers, the model label is found on the motor head, under the light cover, or on the opener housing. Once the opener model is known, check whether the needed part is a radio control item, wall control, safety sensor, circuit board, drive part, or accessory.
- For replacement remotes: confirm the opener model, Intellicode or fixed-code technology, frequency, button count, and whether a universal remote is appropriate.
- For wireless keypads: match the keypad to the opener’s radio technology and programming method.
- For receivers: verify receiver power, relay output, wiring, and whether the receiver is being added to a garage opener or compatible gate controller.
- For wall consoles: check whether the opener requires a specific Genie Series II, Series III, wired, or universal control.
- For safety sensors: match the sensor style to the opener and check alignment, wiring, and safety function before replacing.
- For circuit boards and drive parts: match the exact opener model, board number, rail type, and drive system before ordering.
Before Ordering Genie Garage or Gate Accessories
- Confirm the exact Genie opener model number before ordering replacement parts.
- Check the existing remote, keypad, receiver, wall console, or board part number when available.
- Verify whether the opener uses Intellicode, fixed-code/DIP-switch, or universal remote compatibility.
- For remotes and keypads, confirm frequency, button count, coding style, and programming method.
- For receiver kits, confirm power, relay output, wiring, and the opener or gate controller input.
- For wall consoles, check whether the opener uses Series II, Series III, standard wired control, or a universal wall button.
- For safety sensors, verify wiring, alignment, opener compatibility, and whether the sensor set includes both required sides.
- For gate use, confirm the Genie product is actually compatible with the gate receiver or controller before ordering.
Genie Compatibility and Fitment Notes
Genie compatibility depends on the opener model, production date, radio system, frequency, coding style, wall console type, safety sensor type, circuit board number, and drive system. Two Genie remotes, keypads, wall consoles, or boards may look similar but work with different opener generations.
When replacing a Genie remote or keypad, verify the radio technology and programming method. When replacing a receiver, check wiring, power, and relay output before connecting it to an opener or gate controller. When replacing a circuit board, drive carriage, safety sensor, or wall console, match the exact opener model and part number whenever possible.
If a Genie accessory is being connected to a gate operator, access control system, garage opener control circuit, safety sensor circuit, or receiver input, have a qualified technician verify wiring when needed. Do not bypass garage door safety sensors, gate safety devices, photo eyes, reversing edges, safety loops, or required entrapment protection.
Related Genie Garage and Gate Accessory Categories
- Garage Door Remotes
- Garage Door Keypads
- Garage Opener Parts
- Garage Door Safety Sensors
- Remote Controls
- Receivers
- Wireless Keypads
- Gate Opener Accessories
- Access Control
- Garage Door Opener Circuit Boards
- Garage Door Wall Consoles
South Florida Local Pickup
Gate Openers Unlimited is located in South Florida and offers local pickup from our Hialeah Gardens warehouse when available. This is helpful for local garage door technicians, gate technicians, installers, property managers, HOAs, homeowners, and commercial buyers who need Genie remotes, keypads, receivers, wall consoles, safety sensors, opener parts, or related access accessories without waiting on standard shipping. Please confirm availability before heading to the warehouse.
Genie Garage and Gate Openers FAQ
What are Genie products commonly used for?
Genie products are commonly used for garage door opener operation, remote control access, wireless keypad entry, wall console control, safety sensor replacement, receiver upgrades, and garage opener repairs. Select Genie radio control products may also work with compatible gate receiver systems when properly matched.
Are Genie remotes universal?
Not all Genie remotes are universal. Some Genie remotes are made for specific Genie Intellicode or fixed-code systems, while some Genie universal remotes support select Genie and other compatible opener or receiver brands. Always check the opener model, frequency, and coding technology before ordering.
How do I know which Genie remote I need?
Start with the Genie opener model number and the part number on the existing remote, if available. Check whether the opener uses Intellicode, fixed-code/DIP-switch, or another supported radio system. The correct remote depends on the opener generation, frequency, and programming method.
Can Genie keypads work with all Genie garage door openers?
No. Genie keypads must match the opener’s radio technology and programming method. Some keypads work with Intellicode systems, some support older fixed-code systems, and some universal models support select opener types. Verify compatibility before ordering.
Can Genie remotes be used with gate openers?
Select Genie universal remotes or receiver products may work with certain gate receiver systems, but this must be verified. Gate compatibility depends on the receiver, frequency, coding style, button setup, and controller input. Do not assume a Genie garage remote will operate a gate without checking compatibility.
What should I check before replacing a Genie wall console?
Check the opener model, wall console series, wiring style, and whether the opener requires a Genie Series II, Series III, standard wired push button, or universal wall control. Wall consoles are not automatically interchangeable across all Genie openers.
Why is my Genie remote or keypad not working?
A Genie remote or keypad may stop working because of a weak battery, incorrect programming, incompatible frequency, receiver problem, damaged transmitter, lockout setting, antenna issue, or opener control board problem. Check the remote, keypad, receiver, and opener model before replacing parts.
Do Genie garage opener parts require professional installation?
Many remotes and keypads can be programmed by the user when the correct model is selected. Circuit boards, safety sensors, receiver wiring, drive parts, and any gate-related wiring should be handled by a qualified garage door or gate technician when electrical work, safety circuits, or unfamiliar controls are involved.
