GENIE 110340.0001.S, LOOP,PREFORMED,PAVEOVER,4'X6'

GENIE 110340.0001.S, LOOP,PREFORMED,PAVEOVER,4'X6'

The Genie 110340.0001.S is a preformed inductive detection loop designed for paveover installation in a 4 ft x 6 ft detection zone. In the paveover installation method, the loop assembly is placed on the existing pavement surface and permanently embedded under a new layer of asphalt or concrete. The 18 AWG wire leads provide a 2-wire output connection to the 112723 loop detector. This loop is factory-preformed to 4 ft x 6 ft dimensions, eliminating field forming and ensuring consistent loop geometry.

Key Features

• Paveover installation method - laid on existing surface before new asphalt or concrete overlay, no sawcutting required
• 4 ft x 6 ft (48 in x 72 in) loop footprint sized for single-lane vehicle detection
• 18 AWG lead wires with 2-wire output for connection to inductive loop detector
• Designed for use with Genie 112723 loop detector module or compatible open/auxiliary input
• Inductance-based vehicle detection triggers gate operator open or hold-open function
• Factory preformed shape for consistent geometry and faster, repeatable field installation

Compatibility Guide

• Genie 112723 loop detector
• Genie commercial gate operators with loop detector input
• Genie open/auxiliary input-capable operators
• Inductive loop vehicle detection systems accepting 2-wire input

Frequently Asked Questions

Q: What is the difference between a paveover loop and a sawcut loop?

A: A paveover loop is placed directly on top of an existing pavement surface and then covered with a new layer of asphalt or concrete. This eliminates the need for a saw cut in the existing surface, making it ideal for new construction or planned resurfacing projects.

Q: What detector or controller does this loop connect to?

A: This loop is designed to connect to the Genie 112723 loop detector module or any compatible open/auxiliary input on Genie commercial gate operators that accepts a 2-wire inductive loop input.

Q: Can this loop be installed in existing pavement?

A: No. A paveover loop must be installed before the final asphalt or concrete surface is poured or laid. It is not suitable for installation in existing finished pavement, which requires a sawcut loop instead.

Q: What sealant or accessory is recommended with this loop?

A: Genie loop sealant part number 110341 is recommended as a cross-reference accessory for sealing and securing the loop leads and connections during or after installation.

Q: What wire gauge and output type does this loop use?

A: The loop uses 18 AWG lead wires with a 2-wire output configuration designed to feed an inductive loop detector. The detector monitors changes in inductance caused by a vehicle passing over or stopping on the loop.