HySecurity MX4265 is a target magnet used on select HySecurity SwingSmart CNX swing gate operator applications. Current listings describe MX4265 as a plastic magnet used to trip the open and close sensors, with mounting at the taper clamp hub.
Important note: the provided product description references SwingSmart 535, but the strongest current part-number matches identify MX4265 for SwingSmart CNX, including SwingSmart CNX 20 applications. Because target magnet fitment depends on sensor location, hub style, operator generation, and parts-diagram confirmation, verify the operator model, serial number, taper clamp hub arrangement, and HySecurity parts diagram before ordering.
The target magnet provides the magnetic target used by the operator's open and close sensing system. As the operator moves through its travel, the magnet passes the target sensor area so the control system can detect the proper position reference where the system is designed to use it.
A missing, damaged, misaligned, or incorrectly mounted target magnet can contribute to limit learning problems, open or close sensor errors, inconsistent position detection, or failure of the operator to recognize travel correctly. Similar symptoms can also be caused by sensor failure, wiring issues, controller faults, loose hub hardware, incorrect setup, damaged drive components, or physical gate movement problems.
Use HySecurity MX4265 only where the operator parts diagram, original installed magnet, or HySecurity documentation confirms this part number.
Do not order MX4265 based only on the words "target magnet" or "SwingSmart." Current listings identify MX4265 primarily for SwingSmart CNX applications, while the provided description references SwingSmart 535. SwingSmart CNX, SwingSmart 535, SwingSmart DC, and other HySecurity swing operators may use different sensing parts, magnet positions, hub components, or setup procedures.
This part should not be confused with the target sensor itself. The magnet and the sensor work together, but they are not the same part. If the operator is showing a target, limit, or travel-related fault, verify whether the issue is the magnet, sensor, wiring, controller setup, or mechanical position before ordering.
| Feature / Specification | Details |
|---|---|
| Manufacturer | HySecurity / Nice HySecurity |
| Part Number | MX4265 |
| Product Type | Target magnet |
| Common Description | Target magnet for SwingSmart CNX open and close sensor activation |
| Common Application | Select HySecurity SwingSmart CNX swing gate operator applications |
| Material / Construction | Plastic body with integrated magnet, based on current listing descriptions |
| Mounting Location | Taper clamp hub where specified by the operator parts diagram |
| Electrical Rating | Not applicable - passive magnet, not a powered electrical component |
| Sensor Function | Used to trip or activate open and close sensors where the system is designed for this target |
| Package Contents | Verify current package contents before ordering; mounting screw or hardware may vary by package |
The correct related parts depend on the operator model, sensor arrangement, hub style, and the reason the target magnet is being replaced. Inspect the full sensing area before ordering only the magnet.
Before replacing MX4265, inspect the existing magnet location, taper clamp hub, sensor face, mounting screw, and wiring to the open/close sensor circuit. A target fault or position detection issue may be caused by a missing magnet, weak or damaged magnet, incorrect mounting position, loose hub hardware, dirty sensor face, damaged sensor, wiring fault, or controller setup issue.
If the operator is a SwingSmart 535, verify MX4265 directly against the SwingSmart 535 parts diagram before ordering. Current part-number matches point strongest to SwingSmart CNX, so the model-family label should be checked carefully.
A qualified gate technician is recommended if the operator is not detecting the target magnet, will not learn limits, shows repeated target or position faults, has damaged sensor wiring, or has unknown prior modifications. Do not bypass photo eyes, safety edges, inherent entrapment protection, limit controls, reset circuits, target sensors, controller protections, or any required safety device during testing.
HySecurity MX4265 is a target magnet used on select HySecurity SwingSmart CNX gate operator applications. It is commonly used to trip the open and close sensors.
The provided description references SwingSmart 535, but current part-number matches identify MX4265 for SwingSmart CNX. Use MX4265 on SwingSmart 535 only if the parts diagram for that operator specifically lists this part number.
Current listings describe MX4265 as mounting to the taper clamp hub. Confirm the exact mounting location against the operator parts diagram before installation.
No. MX4265 is the magnet that trips the open and close sensors. The target sensor is a separate part that detects the magnet.
Yes. A missing, damaged, loose, or misaligned target magnet can contribute to target detection, limit learning, or position-related problems. Sensor wiring, controller setup, and mechanical travel should also be checked.
Package contents should be verified before ordering. Some target magnets may use a mounting screw, but included hardware can vary by package.
A qualified gate technician is recommended if the operator is not detecting the magnet, will not learn limits, has sensor wiring issues, or has unknown prior modifications.