HySecurity MX4329-03 is a Hall effect sensor with harness for select HySecurity SwingSmart CNX / 700L gate operator applications. Current listings identify this part as "SENSOR, HE W/ HARNESS, CNX 700" and "Hall Effect Sensor w/ Harness."
A Hall effect sensor is used for magnetic position detection in the operator system. It works with the proper magnetic target and controller input so the operator can monitor position or travel reference where the system is designed for it. Because sensor fitment depends on operator generation, harness style, sensor location, and magnet arrangement, MX4329-03 should be ordered only where the HySecurity parts diagram confirms this part number.
The Hall effect sensor detects a magnetic field from the correct target magnet as the operator moves through its travel. This position feedback helps the control system recognize movement or target reference points used during setup and normal operation.
A failed, damaged, misaligned, disconnected, or incorrect Hall effect sensor can contribute to target detection problems, position feedback issues, travel setup problems, limit-learning errors, or inconsistent gate movement. Similar symptoms can also be caused by a missing or damaged target magnet, incorrect magnet alignment, harness damage, loose connectors, controller input issues, incorrect setup, gearbox problems, arm movement issues, or gate binding.
Use HySecurity MX4329-03 only where the operator parts diagram, original sensor label, or HySecurity documentation confirms this part number.
Do not order MX4329-03 based only on the words "Hall effect sensor" or "sensor with harness." HySecurity operators can use different target sensors, Hall effect sensors, magnet targets, harness lengths, and controller connections depending on model and generation.
The user-provided description references 700L, while current listings also use CNX 700 and SwingSmart CNX wording. Verify the exact operator model, serial number, parts diagram, harness connector, and sensor location before ordering.
| Feature / Specification | Details |
|---|---|
| Manufacturer | HySecurity / Nice HySecurity |
| Part Number | MX4329-03 |
| Product Type | Hall effect sensor with harness |
| Common Description | Sensor, HE w/ harness, CNX 700 / 700L |
| Sensor Type | Hall effect / magnetic field detection sensor |
| Common Application | Select SwingSmart CNX / 700L applications where listed by parts diagram |
| Harness | Included sensor harness, based on current listing descriptions |
| Function | Provides magnetic position feedback where specified by the operator design |
| Related Target | Requires correct target magnet and alignment; target magnet is separate unless stated |
| Package Contents | Verify current package contents before ordering; mounting hardware or target magnet may be separate unless stated |
The correct related parts depend on the operator model, sensing system, magnet target, and reason for replacement. Inspect the full target/sensor area before ordering only the Hall effect sensor.
Before replacing MX4329-03, inspect the target magnet, sensor face, harness connector, wiring route, sensor mounting location, and controller input. A Hall effect sensor fault can be caused by a missing magnet, cracked magnet, incorrect magnet spacing, loose sensor bracket, damaged harness, corroded connector, controller setup issue, or mechanical travel problem.
If the operator is showing a target, position, or learn-limit issue, do not assume the sensor is the only failed part. Verify that the magnet passes the sensor correctly, the harness is not pinched or cut, the controller input is reading correctly, and the gate is moving smoothly through the expected travel.
A qualified gate technician is recommended if the operator is not detecting the Hall effect sensor, will not learn limits, has target or position faults, has damaged wiring, or has unknown prior modifications. Do not bypass photo eyes, safety edges, inherent entrapment protection, target sensing, limit controls, reset circuits, controller protections, or any required safety device during testing.
HySecurity MX4329-03 is a Hall effect sensor with harness for select HySecurity SwingSmart CNX / 700L gate operator applications.
The Hall effect sensor detects the magnetic field from the correct target magnet and provides position feedback to the operator control system where this sensing method is used.
Yes. Current listings identify MX4329-03 as a Hall effect sensor with harness. Verify current package contents before ordering, especially if mounting hardware is also needed.
No. MX4329-03 is the sensor with harness. The target magnet is a separate magnetic target that the sensor detects.
Current listings associate MX4329-03 with SwingSmart CNX / CNX 700 / 700L applications. Use it only where the operator parts diagram confirms this part number.
Yes. A failed, damaged, disconnected, or misaligned Hall effect sensor can contribute to target detection, limit-learning, or position feedback problems. The target magnet, harness, controller input, and mechanical travel should also be checked.
A qualified gate technician is recommended if the operator will not detect the sensor, will not learn limits, has damaged wiring, or has unknown prior modifications.