The HySecurity MX5939 is a 6 inch aluminum AdvanceDrive wheel conversion kit with hub, supplied as a 10-pack, for select HySecurity / Nice HySecurity SlideDriver gate operator applications. This bulk kit is useful for service inventory, multi-operator sites, and larger maintenance projects where several 6 inch AdvanceDrive wheel-and-hub assemblies are being replaced or converted.
AdvanceDrive wheels are part of the HySecurity SlideDriver traction system. The wheel and hub should be matched by wheel diameter, hub style, drive rail type, mounting hardware, operator model, and current HySecurity service instructions before ordering. This kit should not be confused with 8 inch AdvanceDrive wheel kits, XtremeDrive cogged wheel kits, or wheel-only replacement parts.
The AdvanceDrive wheel assembly transfers operator drive force to the slide gate through the drive rail. The wheel and hub work with the drive arms, wheel mounts, clamping force, and a properly aligned drive rail to move the gate smoothly and consistently.
When the wheel surface, hub, lug nuts, or mounting hardware is worn or damaged, the operator may slip, chatter, lose traction, wear the drive rail, or move unevenly. Replacing the wheel and hub as a matched conversion kit helps restore the correct drive-wheel setup where the current HySecurity parts diagram and service instructions call for a 6 inch AdvanceDrive wheel conversion kit with hub.
This wheel conversion kit may be used with the following applications where the current HySecurity parts diagram or service instructions confirm fitment:
Important: Do not assume MX5939 fits every SlideDriver model or every HySecurity slide gate operator. Confirm the operator model, wheel diameter, drive rail style, hub requirement, and current HySecurity parts diagram before ordering.
AdvanceDrive wheel kits, XtremeDrive wheel kits, hubs, lug nuts, hardware kits, and rack kits can be easy to mix up. Wheel diameter, wheel style, hub design, lug nut type, rack requirement, and drive rail setup must match the operator.
| Part / Component | Common Description | Interchangeability Note |
|---|---|---|
| MX5939 | 6 inch aluminum AdvanceDrive wheel conversion kit with hub, 10 pack | Bulk kit where multiple 6 inch wheel-and-hub conversion assemblies are needed |
| MX002707 | 6 inch AdvanceDrive wheel assembly with hub and hardware | Related single wheel-and-hub assembly, not the 10-pack bulk kit |
| MX002027 | 6 inch aluminum AdvanceDrive wheel conversion kit with hub | Related single conversion kit reference, not the 10-pack bulk kit |
| MX001827 | 6 inch AdvanceDrive wheel replacement | Wheel replacement reference, not the same as a conversion kit with hub unless the current parts diagram confirms contents |
| MX5854 | 8 inch AdvanceDrive wheel conversion kit with hub, 10 pack | 8 inch version; not interchangeable with the 6 inch MX5939 kit |
| XtremeDrive wheel kits | Cogged wheels used with XtremeDrive rack | Different traction system; not interchangeable with AdvanceDrive wheel kits unless HySecurity documentation confirms a full conversion |
The MX5939 kit is a 10-pack of 6 inch aluminum AdvanceDrive wheel conversion kits with hubs. It is not the same as the 8 inch MX5854 bulk kit, a single MX002707 wheel-and-hub assembly, the MX002027 single conversion kit, a wheel-only replacement, or an XtremeDrive cogged wheel kit.
AdvanceDrive wheel replacement should not be used to cover up a gate problem. Before replacing wheels, confirm the gate rolls freely, the drive rail is straight and properly aligned, the operator chassis is set correctly, the drive arms and wheel mounts are serviceable, and the gate is not dragging or binding.
| Feature / Specification | Details |
|---|---|
| Manufacturer | HySecurity / Nice HySecurity |
| Part Number | MX5939 |
| Product Type | AdvanceDrive wheel conversion kit with hub |
| Wheel Diameter | 6 inch |
| Wheel Material | Aluminum wheel assembly where specified |
| Pack Quantity | 10 wheel conversion kits |
| Common Description | Wheelkit, Conversion w/Hub, Alum, Adv 6 in 10PK |
| Common Operator Family | Select HySecurity SlideDriver applications using 6 inch AdvanceDrive wheels where specified |
| Drive System | AdvanceDrive wheel-to-rail traction system |
| Included Hub | Yes, described as wheel conversion kit with hub; confirm current package contents before ordering |
| Package Contents | 10 wheel conversion kits with hub; confirm included lug nuts, clamping screws, hub hardware, washers, and current kit contents before ordering |
Before replacing AdvanceDrive wheels, inspect the full SlideDriver drive system. Slipping, chatter, uneven travel, or wheel wear may be caused by worn wheels, but it can also be caused by a bent drive rail, improper wheel clamping, loose drive arms, worn pivots, poor gate alignment, bad rollers, gate drag, or an operator that is not square to the rail.
Confirm the wheel diameter before ordering. The 6 inch AdvanceDrive wheel kits are not interchangeable with 8 inch AdvanceDrive kits, and AdvanceDrive wheels are not the same as XtremeDrive cogged wheels used with XtremeDrive rack.
The MX5939 AdvanceDrive wheel conversion kit is part of the SlideDriver drive system. Installation should be performed by a qualified gate technician when the work involves heavy slide gates, drive wheel replacement, drive rail alignment, wheel clamping, hub hardware, manual release adjustment, or unknown prior modifications.
Do not bypass limits, photo eyes, safety edges, vehicle detection, entrapment protection, controller protections, manual release functions, or operator safeguards to complete a wheel replacement. If the gate does not roll freely or the drive rail is not straight and properly supported, correct the gate mechanics before relying on new wheels to improve movement.
The HySecurity MX5939 is a 10-pack of 6 inch aluminum AdvanceDrive wheel conversion kits with hubs for select HySecurity SlideDriver applications where this wheel-and-hub configuration is specified.
Yes. MX5939 is described as a wheel conversion kit with hub. Current package contents should still be confirmed before ordering, including lug nuts, clamping hardware, washers, and related fasteners.
No. MX5939 is the 6 inch AdvanceDrive wheel conversion kit with hub, supplied as a 10-pack. MX5854 is the related 8 inch AdvanceDrive wheel conversion kit with hub, also supplied as a 10-pack.
No. MX5939 is an AdvanceDrive wheel conversion kit. XtremeDrive uses a cogged wheel and rack system, which is a different traction setup.
MX002707 is commonly listed as a single 6 inch AdvanceDrive wheel assembly with hub and installation hardware. MX5939 should be treated as the bulk 10-pack version where multiple 6 inch wheel-and-hub assemblies are needed.
Check the drive rail, wheel mounts, hub hardware, lug nuts, drive arm pivots, manual release, wheel clamping, gate rollers, gate alignment, and whether the gate rolls freely before replacing the wheels.
Yes. Proper wheel installation, hub hardware torque, drive rail contact, wheel clamping, and safety testing are important, so installation should be handled by a qualified gate technician.