LiftMaster 041C2761-1 is the 10 ft chain and cable replacement assembly used on select residential chain drive garage door openers. This longer one-piece kit is made for openers installed on 10 ft high doors, where the rail and trolley travel require more chain/cable length than a standard 7 ft or 8 ft assembly. It is most often replaced after the drive chain/cable stretches, breaks, corrodes, binds, or becomes damaged during gear or trolley failure. Because the part length is tied directly to opener rail travel, the correct kit must be selected by door height and parts diagram.
| Feature / Specification | Details |
|---|---|
| Manufacturer | LiftMaster / Chamberlain Group |
| Product Type | One-piece chain and cable kit |
| Part Number | 041C2761-1 |
| Application | Garage door opener chain/cable drive repair |
| Compatible Operator Type | Select residential chain drive garage door openers |
| Door Height | 10 ft |
| Drive Type | Chain drive |
| Notes | Match rail length, door height, and parts diagram |
Longer 10 ft rail systems put more demand on correct chain tension and rail alignment. After installation, check travel, force settings, and door balance.
Opener force settings should not be increased to overcome a binding door. Correct door balance and hardware problems before installing or testing new opener drive parts.
Yes. It is the 10 ft chain and cable kit for select chain drive garage door opener rail systems.
No. Use the correct kit for the installed door height and rail length.
Related references include 41C2761-1, 41C2761, and 041C2761.
It can replace a broken, stretched, rusted, kinked, or damaged chain/cable assembly.
Yes. Chain tension, travel limits, and safety reversal should be checked after the repair.