The US Automatic 580060-2PK provides two Delron idler roller assemblies for Patriot RSL slide gate opener service. It is commonly ordered when both chain guide rollers are worn or when a technician wants to service matching roller positions together.
A worn or damaged idler roller can create chain noise, uneven chain tracking, premature sprocket wear, or inconsistent slide gate movement. Replacing the roller helps restore smooth low-friction chain guidance when the Patriot RSL mechanical assembly is otherwise in good condition.
This part is model-specific. It is not a general gate roller, v-groove wheel, guide roller, or swing gate part. Use it only where the Patriot RSL parts diagram calls for the 580060 idler roller assembly.
| Manufacturer | US Automatic / USAutomatic |
|---|---|
| Product Type | Delron idler roller assembly |
| Part Number | 580060-2PK |
| Application | Patriot RSL slide gate opener chain guidance |
| Material | Delron / acetal-style roller with bearing hardware |
| Included Components | Two roller assemblies with bearing, washer, and bolt |
| Dimensions | Approx. 2.5 in outside diameter, 1.06 in width, 0.75 in mounting hole, 0.2 in track depth |
| Notes | Use on Patriot RSL slide operators only |
If the chain is jumping, rubbing, or wearing unevenly, inspect chain tension, sprocket condition, gate rolling resistance, and operator alignment. A new roller will not correct a dragging gate or misaligned chain path by itself.
Do not work around a powered slide gate chain drive while the operator can move. Disconnect power and secure the gate before mechanical service.
The 580060 idler roller is used on US Automatic Patriot RSL slide gate operators where the parts diagram calls for this roller assembly.
The roller assembly is commonly listed with the roller, bearing, washer, and bolt hardware. The 2-pack includes two roller assemblies.
No. The 580060 is for Patriot RSL slide gate chain guidance. It is not a Patriot swing actuator part.
Common listed dimensions are about 2.5 inches outside diameter, 1.06 inches wide, 0.75 inch mounting hole, and 0.2 inch track depth.
It can help if the noise is caused by a worn idler roller, but chain tension, sprocket wear, operator alignment, and gate track condition should also be checked.