HySecurity MX001634R is a reconditioned 3/4 HP, 60Hz, 3-phase, 3450 RPM electric motor reference for select HySecurity StrongArm barrier gate operator applications. It is the reconditioned counterpart commonly associated with the MX001634 3-phase motor family.
In a compatible StrongArm hydraulic barrier operator, the motor drives the hydraulic pump system that raises and lowers the arm. The motor must match the required horsepower, phase, voltage, frequency, RPM, mounting arrangement, shaft, coupler, and pump pack configuration.
Three-phase motors also require correct site power, overload settings, and rotation verification. Incorrect phase wiring can cause wrong pump rotation, poor hydraulic performance, overheating, tripped protection, or operator damage.
Common replacement reasons may include failed 3-phase motor, noisy bearings, overheated motor, no pump rotation, tripped motor protection, incorrect pump drive operation, or a confirmed defective 3/4 HP StrongArm motor. Always diagnose the complete operator before replacing parts, because a failed mating component, incorrect wiring, hydraulic load, or damaged hardware can cause similar symptoms.
| Feature | Specification |
|---|---|
| Manufacturer | HySecurity / Nice HySecurity |
| Product Type | Reconditioned electric motor |
| Part Number | MX001634R |
| Related New Motor | MX001634 |
| Horsepower | 3/4 HP |
| Frequency | 60Hz |
| Phase | 3-phase |
| Speed | 3450 RPM |
| Voltage | 208/230/460VAC where listed |
| Common Operator Family | StrongArm where listed |
| Notes | Verify rotation, shaft, coupler, mount, and overload settings |
For 3-phase motor replacements, verify incoming voltage, motor lead configuration, overload sizing, contactor condition, and pump rotation before normal operation. Wrong rotation or voltage can damage the hydraulic pump or prevent the operator from moving correctly.
Three-phase motor replacement requires qualified electrical service. Disconnect and lock out power before service, verify wiring against the motor nameplate, and do not bypass overloads, contactors, or safety controls.
Yes, MX001634R is the reconditioned reference associated with the MX001634 3/4 HP 3-phase motor family. Confirm by parts diagram before ordering.
It is commonly associated with select HySecurity StrongArm barrier gate operator applications that require the 3/4 HP 3-phase motor.
No. A 3-phase motor is not interchangeable with a 1-phase motor. The phase, voltage, horsepower, RPM, and mounting details must match.
Incorrect rotation on a 3-phase motor can drive the hydraulic pump the wrong direction, causing poor performance or possible pump damage.
Verify voltage wiring, phase, overload settings, contactor condition, shaft/coupler alignment, pump rotation, and all safety functions.