HySecurity MX001633, Motor, Electric, 60Hz, 3/4 hp, 1PH, 3450 RPM, Reconditioned
HySecurity MX001633 is a 3/4 HP, 60Hz, 1-phase, 3450 RPM electric motor reference used in select HySecurity operator applications. The uploaded title describes this item as reconditioned, so confirm whether the sellable SKU should be MX001633 or MX001633R before import and fulfillment.
This motor is commonly associated with HySecurity StrongArm hydraulic barrier gate operator applications where the parts diagram calls for the 3/4 HP single-phase motor. It drives the hydraulic pump system that moves the barrier arm. Correct motor selection affects pump rotation, hydraulic output, starting load, and overall operator reliability.
Do not select this motor by horsepower alone. Voltage, phase, frequency, RPM, shaft and coupler style, mounting, motor brand, pump pack, and operator generation must match the installed equipment. A 1-phase motor is not interchangeable with a 3-phase motor just because the horsepower is the same.
Common replacement reasons may include failed motor windings, noisy bearings, motor overheating, no motor rotation, tripped overload, slow hydraulic operation caused by motor failure, or a motor that has been confirmed defective after electrical and hydraulic diagnosis. Always diagnose the complete operator before replacing parts, because a failed mating component, incorrect wiring, hydraulic load, or damaged hardware can cause similar symptoms.
Compatible With
- Select HySecurity StrongArm operator applications where the parts diagram lists MX001633, MX001633R, or an approved 3/4 HP 1-phase replacement reference.
- Applications that originally used the 3/4 HP, 60Hz, 1-phase, 3450 RPM motor with matching voltage, shaft, mount, and coupler arrangement.
- Reconditioned replacement use only when MX001633R is confirmed as the correct service number.
- May be related to MX001910 service references where documentation supports the substitution.
- Not interchangeable with MX001634 or MX001634R 3-phase motors, 1 HP motors, 24VDC motors, or different RPM motor assemblies.
Features & Specifications
| Feature | Specification |
|---|
| Manufacturer | HySecurity / Nice HySecurity |
| Product Type | Electric motor |
| Part Number | MX001633 |
| Condition Note | Uploaded title says reconditioned; verify if MX001633R is required |
| Horsepower | 3/4 HP |
| Frequency | 60Hz |
| Phase | 1-phase |
| Speed | 3450 RPM |
| Common Operator Family | StrongArm where listed |
| Notes | Verify voltage, nameplate, shaft, mount, and coupler |
Also Known As / Related Part Numbers
- MX001633
- MX001633R
- HY-MX001633
- HYS-MX001633
- Nice HySecurity MX001633
- 3/4 HP 1PH 3450 RPM motor
- Motor, Electric, 60Hz, 3/4 hp, 1PH, 3450 RPM
- Reconditioned 3/4 HP 1PH motor
- MX001910 related replacement reference - verify documentation
- MX001634 and MX001634R 3PH related motor - not interchangeable
Technician Note
This row has a part-number/condition concern: the mfgid is MX001633, but the product name says reconditioned. Reconditioned HySecurity motor listings commonly use an R suffix. Verify whether the import SKU should remain MX001633 or be MX001633R.
Before Ordering
- Confirm whether the sellable part is MX001633 or MX001633R.
- Match the motor nameplate for horsepower, phase, voltage, frequency, and RPM.
- Confirm the operator parts diagram lists the 3/4 HP 1-phase motor for the installed StrongArm configuration.
- Verify shaft, coupler, mounting, and pump pack compatibility.
- Confirm the starting issue is not caused by voltage, contactor, overload, capacitor, hydraulic pump load, or gate arm binding.
Professional Advisory
Motor replacement involves high-voltage wiring, moving hydraulic equipment, and rotating components. A qualified technician should disconnect power, verify the motor circuit, confirm pump rotation, and test all safety functions before returning the operator to service.
Questions & Answers
Is this item MX001633 or MX001633R?
The uploaded mfgid is MX001633, but the name says reconditioned. Verify the intended SKU before import because reconditioned HySecurity motor references commonly use the R suffix.
What operator is this motor commonly associated with?
It is commonly associated with select HySecurity StrongArm applications where the parts diagram calls for the 3/4 HP 1-phase motor.
Can I replace a 3-phase motor with this motor?
No. A 1-phase motor should not be used in place of a 3-phase motor. Phase, voltage, RPM, horsepower, shaft, and mounting must match.
What should be checked before replacing the motor?
Check incoming voltage, contactor, overload, starting components, hydraulic pump condition, coupler, arm binding, and the motor nameplate.
Does a motor failure always mean the motor is bad?
No. A motor may fail to start because of low voltage, bad capacitors, overload problems, hydraulic pump load, contactor failure, or mechanical binding.
