HySecurity MX001910, LEESON 3/4 HP 1PH ASSY KIT
The HySecurity MX001910 is a 3/4 HP Leeson single-phase motor kit used in compatible HySecurity gate operator service. The motor is rated for 60Hz operation at 3450 RPM and supports 115/208/230VAC configurations according to available listings. Some sources associate this part with StrongArm operator service, while others describe it for SwingSmart or rotary gate system use. Because those references are not identical, the safest approach is to treat MX001910 as an exact part-number replacement and verify the operator parts diagram. This motor is typically replaced when the operator has motor failure, poor starting, heat issues, or mechanical wear that affects the pump or drive system. Confirm wiring, voltage taps, capacitor/start components, and coupling hardware before service.
Common service reasons may include motor failure, heat, noise, damaged leads, worn hydraulic seals, missing hardware, limit-reference errors, or other symptoms tied to the specific part type. Always diagnose the operator first so the replacement part corrects the actual problem.
Compatible With
This part may be used with the following HySecurity applications when confirmed by part number, operator model, serial number, voltage package, and parts diagram:
- HySecurity StrongArm operators when the parts diagram calls for MX001910
- Select HySecurity SwingSmart or rotary-style operator applications only when the parts diagram and motor nameplate support MX001910
- Other HySecurity systems using a 3/4 HP, 1-phase, 60Hz, 3450 RPM motor kit with matching voltage and coupling requirements
- Not interchangeable with MX001635, MX001636R, MX001637R, MX001642, MX001643, MX001644, MX001647R, or MX001648R without documentation
Features & Specifications
| Feature | Specification |
|---|
| Manufacturer | HySecurity / Nice HySecurity |
| Product Type | Leeson electric motor kit |
| Part Number | MX001910 |
| Horsepower | 3/4 HP |
| Voltage | 115/208/230VAC |
| Phase | 1-phase |
| Frequency | 60Hz |
| Speed | 3450 RPM |
| Application | Compatible HySecurity operator service applications |
| Commonly Associated With | StrongArm; verify SwingSmart or rotary-style applications by parts diagram |
| Included Components | Motor kit; Loctite and anti-seize may be included by supplier for coupling reassembly |
Also Known As / Related Part Numbers
The following numbers and phrases are related search references, catalog aliases, or commonly associated part-number formats. Confirm whether a related number is an exact replacement before ordering.
- MX001910
- HYS-MX001910
- HY-MX001910
- HYP-MX001910
- Nice HySecurity MX001910
- HySecurity Leeson 3/4 HP motor
- Leeson 3/4 HP 1PH assy kit
- HySecurity 115/208/230VAC 3450 RPM motor
Technician Note
Do not select HySecurity service parts by appearance alone. Similar operators can use different motors, switches, manifolds, seals, voltages, phases, frequencies, horsepower ratings, or hardware revisions. Match the original part number and the operator parts diagram before replacing components.
Before Ordering
- Verify the HySecurity part number printed on the old part or shown in the operator parts diagram.
- Confirm the operator model, serial number, and production generation.
- For motors, match horsepower, voltage, phase, frequency, RPM, motor type, and pump coupling arrangement.
- For hydraulic parts, confirm the exact manifold, seal location, and whether the system must be depressurized before service.
- For limit switch parts, confirm switch style, mounting hardware, harness condition, and limit adjustment procedure.
- Inspect related components so a failed motor, leaking seal, or limit issue is not caused by another damaged part.
Professional Advisory
Gate operators can move heavy gates and may contain high-voltage wiring, stored hydraulic pressure, and monitored safety circuits. Do not bypass safety devices, limit switches, entrapment protection, or factory wiring. If the operator moves unpredictably, has missing safety devices, leaks hydraulic fluid, or requires electrical diagnosis, have the system inspected by a qualified gate technician.
Questions & Answers
What should I match before ordering the MX001910 motor?
Match the original HySecurity part number, horsepower, voltage, phase, frequency, RPM, shaft/coupler setup, and operator parts diagram. Do not substitute a similar motor only by physical size.
Is MX001910 a 60Hz motor?
Yes. This listing is written around the 60Hz, 3/4 HP, 1-phase, 3450 RPM specification shown for MX001910. Frequency matters because motor speed, current draw, and heat can change if the wrong motor is used.
Can MX001910 replace another HySecurity motor number?
It may be used in place of MX001910 only when the operator configuration and parts diagram support that substitution. Check the existing nameplate and HySecurity part reference before ordering.
Where is this HySecurity motor commonly used?
This motor is commonly associated with select StrongArm and other documented HySecurity applications. Exact use depends on the operator model, voltage package, phase, and production generation.
Should a technician install this motor?
Yes for most commercial hydraulic gate operators. Motor replacement can involve high voltage, hydraulic pump coupling alignment, and safety-device checks, so a qualified gate technician should handle unsafe or unfamiliar work.
