HySecurity MX001643, MOTOR ASSY,1 H, 3PH,50HZ, 2850
The HySecurity MX001643 is a 1 HP, 3-phase motor assembly for 50Hz HySecurity gate operator configurations. The 2850 RPM rating is consistent with 50Hz motor operation and should be matched to the original motor tag rather than guessed from operator appearance. This motor may be found in select international or special-voltage HySecurity hydraulic systems where the operator requires 3-phase power. Field replacement is usually considered when the motor has failed electrically, will not start under load, runs hot, or has bearing/coupling issues that prevent proper pump drive. Use caution with similar HySecurity motor numbers because 1 HP AC motors can differ by phase, frequency, voltage, and operator family. Always confirm the motor and operator parts diagram before ordering.
Common service reasons may include motor failure, heat, noise, damaged leads, worn hydraulic seals, missing hardware, limit-reference errors, or other symptoms tied to the specific part type. Always diagnose the operator first so the replacement part corrects the actual problem.
Compatible With
This part may be used with the following HySecurity applications when confirmed by part number, operator model, serial number, voltage package, and parts diagram:
- Select HySecurity SlideDriver 50Hz hydraulic slide gate operators when the parts diagram calls for MX001643
- Select HySecurity SwingRiser 50Hz operators when the voltage and phase match
- Other HySecurity 50Hz 3-phase operator builds only with exact part-number confirmation
- Not interchangeable with MX001642 single-phase, MX001644 2 HP, 60Hz AC motors, or 24VDC motors
Features & Specifications
| Feature | Specification |
|---|
| Manufacturer | HySecurity / Nice HySecurity |
| Product Type | Electric motor assembly |
| Part Number | MX001643 |
| Horsepower | 1 HP |
| Phase | 3-phase |
| Frequency | 50Hz |
| Speed | 2850 RPM |
| Application | Select HySecurity 50Hz operator configurations |
| Commonly Associated With | Select SlideDriver and SwingRiser 50Hz applications when confirmed by parts diagram |
| Notes | Title typo in source row appears to say 1 H; product should be reviewed as 1 HP |
Also Known As / Related Part Numbers
The following numbers and phrases are related search references, catalog aliases, or commonly associated part-number formats. Confirm whether a related number is an exact replacement before ordering.
- MX001643
- HYS-MX001643
- HY-MX001643
- HySecurity MX001643 motor assembly
- HySecurity 1 HP 3PH 50Hz motor
- HySecurity 2850 RPM 3-phase motor
- MX001643 50Hz motor
Technician Note
Do not select HySecurity service parts by appearance alone. Similar operators can use different motors, switches, manifolds, seals, voltages, phases, frequencies, horsepower ratings, or hardware revisions. Match the original part number and the operator parts diagram before replacing components.
Before Ordering
- Verify the HySecurity part number printed on the old part or shown in the operator parts diagram.
- Confirm the operator model, serial number, and production generation.
- For motors, match horsepower, voltage, phase, frequency, RPM, motor type, and pump coupling arrangement.
- For hydraulic parts, confirm the exact manifold, seal location, and whether the system must be depressurized before service.
- For limit switch parts, confirm switch style, mounting hardware, harness condition, and limit adjustment procedure.
- Inspect related components so a failed motor, leaking seal, or limit issue is not caused by another damaged part.
Professional Advisory
Gate operators can move heavy gates and may contain high-voltage wiring, stored hydraulic pressure, and monitored safety circuits. Do not bypass safety devices, limit switches, entrapment protection, or factory wiring. If the operator moves unpredictably, has missing safety devices, leaks hydraulic fluid, or requires electrical diagnosis, have the system inspected by a qualified gate technician.
Questions & Answers
What should I match before ordering the MX001643 motor?
Match the original HySecurity part number, horsepower, voltage, phase, frequency, RPM, shaft/coupler setup, and operator parts diagram. Do not substitute a similar motor only by physical size.
Is MX001643 a 50Hz motor?
Yes. This listing is written around the 50Hz, 1 HP, 3-phase, 2850 RPM specification shown for MX001643. Frequency matters because motor speed, current draw, and heat can change if the wrong motor is used.
Can MX001643 replace another HySecurity motor number?
It may be used in place of MX001643 only when the operator configuration and parts diagram support that substitution. Check the existing nameplate and HySecurity part reference before ordering.
Where is this HySecurity motor commonly used?
This motor is commonly associated with select 50Hz SlideDriver and SwingRiser configurations. Exact use depends on the operator model, voltage package, phase, and production generation.
Should a technician install this motor?
Yes for most commercial hydraulic gate operators. Motor replacement can involve high voltage, hydraulic pump coupling alignment, and safety-device checks, so a qualified gate technician should handle unsafe or unfamiliar work.
