The HySecurity MX001910 is a 3/4 HP Leeson single-phase motor kit used in compatible HySecurity gate operator service. The motor is rated for 60Hz operation at 3450 RPM and supports 115/208/230VAC configurations according to available listings. Some sources associate this part with StrongArm operator service, while others describe it for SwingSmart or rotary gate system use. Because those references are not identical, the safest approach is to treat MX001910 as an exact part-number replacement and verify the operator parts diagram. This motor is typically replaced when the operator has motor failure, poor starting, heat issues, or mechanical wear that affects the pump or drive system. Confirm wiring, voltage taps, capacitor/start components, and coupling hardware before service.
Common service reasons may include motor failure, heat, noise, damaged leads, worn hydraulic seals, missing hardware, limit-reference errors, or other symptoms tied to the specific part type. Always diagnose the operator first so the replacement part corrects the actual problem.
This part may be used with the following HySecurity applications when confirmed by part number, operator model, serial number, voltage package, and parts diagram:
| Feature | Specification |
|---|---|
| Manufacturer | HySecurity / Nice HySecurity |
| Product Type | Leeson electric motor kit |
| Part Number | MX001910 |
| Horsepower | 3/4 HP |
| Voltage | 115/208/230VAC |
| Phase | 1-phase |
| Frequency | 60Hz |
| Speed | 3450 RPM |
| Application | Compatible HySecurity operator service applications |
| Commonly Associated With | StrongArm; verify SwingSmart or rotary-style applications by parts diagram |
| Included Components | Motor kit; Loctite and anti-seize may be included by supplier for coupling reassembly |
The following numbers and phrases are related search references, catalog aliases, or commonly associated part-number formats. Confirm whether a related number is an exact replacement before ordering.
Do not select HySecurity service parts by appearance alone. Similar operators can use different motors, switches, manifolds, seals, voltages, phases, frequencies, horsepower ratings, or hardware revisions. Match the original part number and the operator parts diagram before replacing components.
Gate operators can move heavy gates and may contain high-voltage wiring, stored hydraulic pressure, and monitored safety circuits. Do not bypass safety devices, limit switches, entrapment protection, or factory wiring. If the operator moves unpredictably, has missing safety devices, leaks hydraulic fluid, or requires electrical diagnosis, have the system inspected by a qualified gate technician.
Match the original HySecurity part number, horsepower, voltage, phase, frequency, RPM, shaft/coupler setup, and operator parts diagram. Do not substitute a similar motor only by physical size.
Yes. This listing is written around the 60Hz, 3/4 HP, 1-phase, 3450 RPM specification shown for MX001910. Frequency matters because motor speed, current draw, and heat can change if the wrong motor is used.
It may be used in place of MX001910 only when the operator configuration and parts diagram support that substitution. Check the existing nameplate and HySecurity part reference before ordering.
This motor is commonly associated with select StrongArm and other documented HySecurity applications. Exact use depends on the operator model, voltage package, phase, and production generation.
Yes for most commercial hydraulic gate operators. Motor replacement can involve high voltage, hydraulic pump coupling alignment, and safety-device checks, so a qualified gate technician should handle unsafe or unfamiliar work.