Miller Edge Cegard-Max-114NA-W 6ft Heigh, IP67 114 Beam, 10ft Receiver Cable

Miller Edge Cegard-Max-114NA-W 6ft Heigh, IP67 114 Beam, 10ft Receiver Cable

The Miller Edge Cegard-Max-114NA-W-IP67 is a Cegard-Max long range light curtain configuration with a 6 ft. detection height, 114 beams, and an IP67 environmental rating. It is intended for compatible Cegard-Max installations where a tall multi-beam photo-optic field is required. The IP67 rating makes the configuration different from the IP65 model, so the exact part number should be matched when replacing an existing light curtain. Do not mix Cegard-Max components with other light curtain or photo eye families unless the full system is engineered and documented.

Common Applications and Replacement Reasons

• Used where a Cegard-Max IP67 light curtain replacement is required
• Selected for a 6 ft., 114-beam multi-beam photo-optic detection field
• IP67 configuration should not be treated as the same product as IP65

Features & Specifications

Compatible With

• Miller Edge Cegard-Max long range light curtain systems using the 114NA-W IP67 configuration
• Cegard-Max 6 ft. height applications requiring 114 beams
• Cegard-Max installations requiring the IP67 environmental rating
• Cegard-Max-Cover light curtain shield kit where the shield length and side requirement match
• Not automatically compatible with the Cegard-Max-RX-EXT-10 because that receiver extension is listed for IP65 only
• Not automatically interchangeable with Cegard-Max-114NA-W-IP65 because the environmental rating differs
• Not a direct replacement for Invisi-Guard-2, IG2, Cegard/Mini, or standard photo eye systems

Also Known As / Related Part Numbers

• Cegard-Max-114NA-W-IP67
• Cegard Max 114NA W IP67
• Cegard-Max 114NA-W IP67
• ME-Cegard-Max-114NA-W-IP67
• Cegard-Max 6 ft. 114 beam IP67
• Related: Cegard-Max-114NA-W-IP65
• Related: Cegard-Max-Cover
• Do not assume: Cegard-Max-RX-EXT-10 for IP67

Technician Note

The IP67 version should be ordered only when the existing light curtain or job specification calls for IP67. For cable extensions, do not use the IP65-only receiver extension unless documentation confirms it is correct for the specific IP67 installation.

Before Ordering Checklist

• Confirm the existing label shows Cegard-Max-114NA-W-IP67 or an equivalent IP67 configuration
• Match the 6 ft. height and 114-beam specification
• Check whether the original system uses special cable or sealed connector requirements
• Confirm mounting protection and shield requirements before ordering covers
• Test the operator response and safety function after replacement

Professional Advisory

A light curtain should never be bypassed to keep a powered door or gate operating. If the light curtain, control input, or alignment process is unclear, use a qualified technician to restore the safety system correctly.

Product Questions and Answers

What is the Miller Edge Cegard-Max-114NA-W-IP67?

It is the IP67 version of a Cegard-Max long range light curtain listed as 6 ft. high with 114 beams and a 10 ft. receiver cable configuration.

Can I use the IP65 receiver extension with the IP67 light curtain?

Do not assume that. The Cegard-Max-RX-EXT-10 receiver extension is listed for IP65 only, so IP67 cable extension needs should be confirmed separately.

Is IP67 interchangeable with IP65?

No. Treat IP67 and IP65 as separate configurations and match the existing part number or job specification.

What does the 114 beam specification mean?

It identifies the multi-beam detection field configuration of this Cegard-Max light curtain and should be matched to the existing system.

What should be tested after installation?

The light curtain alignment, operator input, and stop or reverse response should be tested before the door or gate is returned to normal service.