Miller Edge Cegard-Max-RX-EXT-10 10ft Cable Extension for Receiver, IP65 Only
The Miller Edge Cegard-Max-RX-EXT-10 is a 10 ft. cable extension for the receiver side of compatible IP65 Cegard-Max light curtain systems. It is an accessory used for cable routing, not a replacement transmitter, receiver, or complete light curtain. This part should be selected only when the existing system is the IP65 Cegard-Max configuration and the receiver cable needs additional length. Because the catalog listing identifies it as IP65 only, do not assume it fits IP67 Cegard-Max systems or other photo-optic product families.
Common Applications and Replacement Reasons
- Used when the receiver cable on an IP65 Cegard-Max needs an additional 10 ft. of length
- Not used as a universal photo eye cable extension
- Critical to match IP rating and receiver-side connection
Features & Specifications
| Manufacturer | Miller Edge |
|---|
| Product Type | Receiver cable extension |
|---|
| Part Number | Cegard-Max-RX-EXT-10 |
|---|
| Product Family | Cegard-Max |
|---|
| Cable Length | 10 ft. |
|---|
| Application | Receiver-side cable extension |
|---|
| Compatible Rating | IP65 Cegard-Max only as listed |
|---|
| Compatible Product | Cegard-Max-114NA-W-IP65 when the receiver cable extension is required |
|---|
| Included Components | Cable extension only |
|---|
| Notes | Not a light curtain, transmitter, receiver, or cover kit |
|---|
Compatible With
- Miller Edge Cegard-Max IP65 light curtain receiver cable applications
- Cegard-Max-114NA-W-IP65 when an additional 10 ft. receiver cable extension is required
- Receiver-side cable routing on compatible IP65 Cegard-Max systems
- Not listed for Cegard-Max-114NA-W-IP67; confirm separately before use with IP67
- Not for Cegard-Max transmitter-side extension unless documentation confirms the connection
- Not a replacement for IG2, Invisi-Guard-2, Cegard/Mini, or standard photo eye cables
Also Known As / Related Part Numbers
- Cegard-Max-RX-EXT-10
- Cegard Max RX EXT 10
- Cegard-Max RX EXT 10
- ME-Cegard-Max-RX-EXT-10
- Cegard-Max 10 ft. receiver extension
- Cegard-Max receiver cable extension
- Related: Cegard-Max-114NA-W-IP65
- Not the same as: Cegard-Max-Cover
Technician Note
This extension is receiver-side and IP65-only as listed. If the installed light curtain is IP67 or the cable is on the transmitter side, confirm the correct accessory before replacing or extending the wiring.
Before Ordering Checklist
- Confirm the light curtain is a compatible IP65 Cegard-Max system
- Confirm the extension is needed on the receiver side
- Confirm connector type and routing path before ordering
- Do not use the cable to bypass or relocate a failed receiver
- Test the full light curtain detection field after cable work
Professional Advisory
Safety-device cable extensions should be installed so the light curtain remains protected from abrasion, pinch points, and water entry. A qualified technician should check the input and detection response after any cable change.
Product Questions and Answers
What does the Cegard-Max-RX-EXT-10 do?
It adds 10 ft. of cable length to the receiver side of a compatible IP65 Miller Edge Cegard-Max light curtain system.
Is this a complete light curtain?
No. It is only a receiver cable extension, not a transmitter, receiver, light curtain pair, or cover kit.
Can I use this with the IP67 Cegard-Max version?
Do not assume that. The part is listed for IP65 only, so IP67 extension requirements should be confirmed separately.
Does this extension go on the transmitter or receiver side?
This part is identified as a receiver extension and should be used on the receiver side of the compatible IP65 system.
What should be checked after installing the cable?
Check cable routing, connector seating, alignment, and the full light curtain stop or reverse response before returning the system to service.
