The AES MULTI-CL-PSK-SH is a replacement shell assembly for compatible AES MULTICOM CLASSIC stainless steel pedestal-mounted units. It is intended for 2026 and newer Multicom Classic pedestal installations where the original housing has been damaged, weathered, dented, corroded, or needs replacement during service.
This part should be treated as the shell / housing assembly only. It does not include the complete Multicom Classic intercom system, cellular motherboard, LCD display, keypad, prox reader, microphone, speaker, power supply, antenna, SIM service, programming, wiring, or access control electronics unless your actual package specifically states otherwise.
Important note: Current supplier data identifies MULTI-CL-PSK-SH as the stainless steel pedestal version for 2026 and newer Multicom Classic models. Some supplier description text may incorrectly reference a powder-coated black body. Treat PSK as the stainless steel pedestal version and verify the actual finish before publishing or ordering for a finish-sensitive project.
The MULTI-CL-PSK-SH replaces the outer shell / body assembly on compatible AES Multicom Classic pedestal-mounted units. It helps restore the physical housing, appearance, and serviceability of the installed intercom when the original shell is no longer in good condition.
The AES MULTI-CL-PSK-SH is intended for compatible AES Multicom Classic pedestal-mounted units from the 2026-and-newer shell family where the stainless steel PSK shell assembly is required. Compatibility should be verified before ordering because Multicom Classic units can vary by generation, mount style, finish, keypad/display layout, electronics, and enclosure design.
Do not order this shell assembly by appearance only. AES Multicom Classic housings vary by model year, mounting style, finish, and product family. The MULTI-CL-PSK-SH should be matched to the exact installed unit and original housing before ordering.
| AES Part | General Use | Important Difference |
|---|---|---|
| MULTI-CL-PSK-SH | 2026 Multicom Classic stainless steel pedestal shell assembly | This page item; stainless steel PSK pedestal version for compatible 2026 and newer units |
| MULTI-CL-PBK-SH | 2026 Multicom Classic powder-coated pedestal shell assembly | Same 2026 Multicom Classic pedestal shell family, but powder-coated PBK finish instead of stainless steel PSK |
| MULTI-CL-IBK-SH | 2026 Multicom Classic imperial shell assembly | Imperial housing version; not the same as the pedestal PSK shell |
| MOD-CL-USPS-PBK-SH | Modular 2 inch x 2 inch Multicom Classic shell assembly | Modular shell configuration; not the same as MULTI-CL-PSK-SH |
| MULTI-CLASSIC-MB | Cellular motherboard for Multicom Classic | Electronics board; does not replace the physical shell assembly |
| MULTICOM-LCD-01 | LCD display with cable for Multicom Classic | Display service part; not a replacement housing |
| Feature / Specification | Details |
|---|---|
| Manufacturer | AES / AES Global |
| Part Number | MULTI-CL-PSK-SH |
| Product Type | Shell assembly / housing |
| Series | Multicom Classic |
| Model Year Note | For 2026 and newer models only according to current product listing |
| Mount Style | Pedestal mount only according to current product listing |
| Finish / Configuration | Stainless steel pedestal version based on the PSK model designation and product title; verify actual finish due to supplier-description mismatch |
| Typical Use | Replacement housing for damaged or weathered compatible Multicom Classic pedestal units |
| Compatibility Method | Verify by AES model, 2026-and-newer generation, mount style, finish, original housing, and service documentation |
| Not Included | Complete intercom, cellular motherboard, LCD display, keypad, prox reader, speaker, microphone, power supply, SIM service, antenna, wiring, programming, and installation labor unless separately stated |
The most important checks on this part are model generation, mount style, and finish. MULTI-CL-PSK-SH should be treated as the 2026-and-newer Multicom Classic stainless steel pedestal shell assembly. If the unit is older than the 2026 shell generation, uses a wall-mount or imperial body, or requires powder-coated finish, this may not be the correct housing.
A shell replacement is usually mechanical, but the electronics and wiring still need to be handled carefully. Before transferring components, document all wiring, connectors, grounding, antenna placement, display mounting, keypad wiring, speaker/microphone routing, and seal locations. If the original shell failed from water intrusion or impact damage, correct the cause before reinstalling the electronics.
Shell replacement on an AES Multicom Classic unit should be handled by a qualified gate access, low-voltage, or access control technician when wiring, component transfer, antenna placement, or weather sealing is involved. Do not bypass access control authorization, emergency access equipment, fire access equipment, monitored photo eyes, safety edges, or gate operator safety inputs while servicing the intercom. If the original housing was damaged by impact, corrosion, water intrusion, vandalism, or improper mounting, correct the underlying issue before reinstalling the internal components.
The AES MULTI-CL-PSK-SH is a 2026 shell assembly / housing for compatible AES MULTICOM CLASSIC stainless steel pedestal-mounted units.
No. MULTI-CL-PSK-SH is the shell assembly only. It does not include the complete intercom, cellular motherboard, LCD display, keypad, prox reader, speaker, microphone, antenna, power supply, SIM service, or programming.
Yes. Current product data identifies this shell assembly for 2026 and newer Multicom Classic models only. Verify the installed unit generation before ordering.
Yes. MULTI-CL-PSK-SH should be treated as the stainless steel pedestal version. Verify the actual finish before publishing because some supplier description text may conflict with the stainless steel title.
No. MULTI-CL-PBK-SH is the related powder-coated pedestal shell assembly. MULTI-CL-PSK-SH is the stainless steel pedestal shell assembly.
No. MULTI-CL-IBK-SH is the related imperial shell assembly. MULTI-CL-PSK-SH is the pedestal shell assembly.
Do not assume it fits older units. This shell is listed for 2026 and newer Multicom Classic models only, so older units should be verified by model, housing style, and service documentation before ordering.
Check the AES model, 2026-and-newer generation, pedestal mount style, stainless steel PSK finish requirement, original shell configuration, internal component reuse, and whether any electronics or service parts are needed separately.