The BEA 10SSTII SuperScan-T assembly is a door-mounted active infrared sensor package used where the sensor travels with the moving door leaf and watches the area near the panel as the door opens or closes. It is a practical replacement choice when the existing installation already uses the BEA SuperScan-T platform and the service tech needs to keep the same module layout, housing length, and wiring approach. Unlike a simple activation switch, this type of sensor is part of the door safety/presence package and needs to be matched to the door style, controller logic, and required safety setup.
This 1 primary and 1 secondary module version should be ordered by the exact part number whenever possible. The SuperScan-T family includes primary-only assemblies, primary/secondary assemblies, longer housings, custom lengths, quick-disconnect harnesses, and separate primary or secondary modules. Similar housings can look close in the field, but the installed module count, end-cap-to-end-cap length, and wiring layout must match the door system. For automatic pedestrian doors, final adjustment and safety verification should be performed by a qualified automatic door technician.
BEA’s SUPERSCAN-T INDUSTRIAL is an active infrared sensor designed for use in industrial environments that require presence and/or safety detection. This sensor can be used on automatic industrial doors, gates and industrial automation applications.
The SUPERSCAN-T INDUSTRIAL uses triangulation to detect the presence of an object, eliminating false detections caused by varying ground and environmental conditions.
In an industrial setting, this versatile sensor can be mounted stationary or on a moving object. Additionally, the SUPERSCAN-T INDUSTRIAL can be used as an individual module or daisy chained with up to 8 Secondary modules (9 total modules). This flexibility allows the SUPERSCAN-T INDUSTRIAL to be used on both narrow and wide doors and many other off door applications. Each module detection zone can be angled independently.
Fit To The application
Housing available up to 96 inches; can be field-cut to desired door width
User-Defined Detection Zones
Detection zone 24 to 96 inches
Adjustable Detection Zone
Can be set to background analysis mode to reduce the change of false detection from faulty environmental situations
Customizable Hold Time
Relay hold time can be adjusted from 0.1 to 4.5 seconds
Standards Compliant
Capable of external monitoring
| Specification | Manufacturer Technical Data |
|---|---|
| Technology | Active Infrared with background suppression |
| Detection Mode | Presence |
| Measurement of Distance | Triangulation |
| Power Supply | 12 – 24 VAC / VDC ±10% |
| Output Interface | Relay |
| Relay Maximum Contact Rating | 1A @ 30 V (resistive) |
| Detection Range | 0 – 8’ |
| Distance Adjustment | 2 – 8’ (rotating cam with linear adjustment) |
| Maximum Mounting Height | 8’ |
| Detection Signal Duration | Infinite Presence Detection |
| Detection Time | < 50 ms |
| Output Hold Time | Potentiometer range: 0.1 – 4.5 s |
| Operating Temperature Range | -30 – 140 °F |
| PCB Dimensions – Primary | 10.91" (W) × 1.5" (H) |
| PCB Dimensions – Secondary | 8.75" (W) × 1.5" (H) |
| Connector to Door Controller | 8-position screw terminal on Primary PCB |
| Primary-to-Secondary Connection | Flat-ribbon cable with connectors and key lock |
| Maximum Number of Secondarys | 8 |
| Function Selection | Detection mode: NO or NC Normal mode or Background Analysis mode |
| Manufacturer | BEA Sensors |
|---|---|
| Product Type | Door-mounted active infrared presence/safety sensor assembly |
| Part Number | 10SSTII |
| Series | SuperScan-T |
| Module Configuration | 1 primary and 1 secondary module |
| Housing Length | 34.5 in end cap to end cap |
| Application | Automatic swinging, folding, revolving, low-energy, and select industrial door applications |
| Sensor Technology | Active infrared triangulation presence detection |
| Compatible Operator Type | Automatic pedestrian doors and select industrial/barrier applications when specified |
| Included Components | 1 primary and 1 secondary module |
| Safety Monitoring | Application dependent; verify door controller requirements and required safety devices |
| Notes | Match part number, housing length, module count, and wiring before ordering |
Use the original BEA label and the door manufacturer parts diagram as the final reference. SuperScan housings, modules, harnesses, and lock-out arrangements can vary by door package even when the sensor family looks similar.
Do not bypass safety sensors or leave an automatic door in service with missing, disabled, or misaligned protection. Automatic door sensor setup should be tested after installation according to the door and sensor manufacturer requirements.
The BEA 10SSTII is used as a door-mounted active infrared presence sensor assembly for select automatic swinging, folding, revolving, low-energy, and industrial door applications that call for the SuperScan-T family.
No. SuperScan-T versions vary by housing length and module count. Match 10SSTII, the original label, and the door parts diagram before replacing a primary-only, primary/secondary, or multi-secondary assembly.
No. This is a door-mounted infrared presence sensor assembly. It should not be used as a shortcut replacement for monitored gate photoeyes, monitored edges, or other operator-required entrapment protection.
The housing length affects door coverage and mounting. A sensor that is too short, too long, or cut incorrectly may leave blind areas or interfere with the door frame, guide rail, or adjacent wall.
Check the existing BEA part number, housing length, number of primary and secondary modules, harness style, door type, and whether the controller requires any additional monitored safety devices or lock-out modules.