The HySecurity MX5861 is a 6 inch XtremeDrive wheel replacement kit with lug nuts for select HySecurity / Nice HySecurity SlideDriver gate operators. This kit is supplied as a 10 pack and is intended for service work where multiple 6 inch XtremeDrive wheels are being replaced or kept in stock for maintenance.
The XtremeDrive wheel is part of the SlideDriver operator drive system. It makes contact with the drive rail and transfers the operator's drive force to the moving gate. Because HySecurity SlideDriver models may use different wheel diameters, drive wheel styles, hub assemblies, and hardware, this kit should be matched to the existing operator and current parts diagram before ordering.
The drive wheel is one of the main wear points in a SlideDriver XtremeDrive system. When the wheel is in good condition and properly matched to the rail, the operator can move the gate smoothly with consistent traction. A worn, glazed, damaged, or incorrect wheel can cause slipping, rough movement, nuisance faults, uneven operation, or premature wear on related drive components.
The MX5861 kit provides multiple 6 inch XtremeDrive replacement wheels with lug nuts. It is useful for maintenance departments, gate service companies, commercial facilities, industrial sites, and multi-operator properties where several compatible 6 inch XtremeDrive wheels may need replacement.
This kit may be used with the following applications where the operator parts diagram confirms fitment:
Important: Do not assume this kit fits every HySecurity SlideDriver operator. Some units use 8 inch XtremeDrive wheels, AdvanceDrive wheels, older wheel-and-hub assemblies, or different drive configurations. Confirm the model, serial number, wheel diameter, hub style, and parts diagram before ordering.
HySecurity drive wheels can look similar, but wheel diameter and drive system style matter. A 6 inch XtremeDrive wheel should not be replaced with an 8 inch wheel, an AdvanceDrive wheel, or a wheel-and-hub kit unless the current HySecurity parts diagram confirms the correct part for that operator.
| Part Number | Description | Interchangeability Note |
|---|---|---|
| MX5861 | 6 inch XtremeDrive replacement wheel kit with lug nuts, 10 pack | Correct bulk replacement kit where MX5861 or a 6 inch XtremeDrive wheel replacement is specified |
| MX5351 | 6 inch XtremeDrive wheel-only kit with lug nuts | Related 6 inch wheel-only service part; not necessarily the same package quantity as MX5861 |
| mx5349-6-inch-xtremedrive-wheel-hub-kit.html">MX5349 | 6 inch XtremeDrive wheel and hub kit | Includes hub hardware; not the same as a wheel-only replacement kit |
| MX5352 | 8 inch XtremeDrive wheel-only kit with lug nuts | Different wheel diameter; not a substitute for 6 inch applications |
| MX5350 | 8 inch XtremeDrive wheel and hub kit | Different wheel diameter; not a substitute for 6 inch applications |
| MX4993 | XtremeDrive lug nuts only | Lug nuts only; does not include replacement wheels |
The MX5861 kit is for 6 inch XtremeDrive wheel replacement. Do not order this kit based only on the HySecurity brand or a quick visual guess. HySecurity SlideDriver operators may use different drive wheel sizes and different drive wheel systems depending on model, configuration, and production generation.
If the existing hub is worn, loose, damaged, or part of a drive assembly that requires updating, a wheel-only replacement kit may not solve the problem. Check the hub, lug hardware, shaft, key, drive wheel style, and current HySecurity parts diagram before deciding whether MX5861 is the right kit.
| Feature / Specification | Details |
|---|---|
| Manufacturer | HySecurity / Nice HySecurity |
| Part Number | MX5861 |
| Product Type | XtremeDrive replacement wheel kit |
| Wheel Diameter | 6 inch |
| Kit Quantity | 10 pack |
| Included Hardware | Lug nuts included; confirm current package contents before ordering |
| Common Operator Family | Select HySecurity SlideDriver operators using 6 inch XtremeDrive wheels |
| Drive System | XtremeDrive |
| Primary Function | Restores drive wheel contact and traction on compatible SlideDriver operators |
| Hub Included | Not confirmed as a hub kit from the MX5861 description; verify whether your repair requires wheel-only replacement or a complete wheel-and-hub kit |
When a 6 inch XtremeDrive wheel is worn out, check more than just the wheel. Fast wheel wear can come from gate drag, rail contamination, a damaged XtremeDrive rack, poor operator alignment, loose hub hardware, incorrect wheel pressure, hydraulic drive problems, or a gate that does not roll freely.
Also confirm the existing wheel diameter before ordering. The 6 inch and 8 inch XtremeDrive wheels are not interchangeable. If the wheel hub is worn or damaged, a wheel-only replacement may not hold correctly or may wear out again quickly.
Drive wheel replacement on a heavy slide gate operator should be handled with care. If the repair involves hydraulic drive pressure, heavy gate movement, worn rail or rack sections, wheel hub removal, shaft hardware, gate alignment, or a gate that is unsafe to move, service should be performed by a qualified gate technician.
Do not bypass safety devices, covers, guards, controller protections, limits, or operator interlocks to test the gate. A slipping or binding slide gate can become a serious hazard if the drive system is forced to run without correcting the mechanical problem.
The HySecurity MX5861 is described as a 6 inch XtremeDrive replacement wheel kit with lug nuts supplied as a 10 pack. Confirm current package contents before ordering, especially if hub hardware is also needed.
MX5861 is for 6 inch XtremeDrive wheel replacement. It should not be used in place of an 8 inch XtremeDrive wheel kit.
The MX5861 description identifies it as a replacement wheel kit with lug nuts. If the wheel hub is worn or damaged, verify whether a separate wheel-and-hub kit is required instead.
This kit is used with select HySecurity SlideDriver operators equipped with 6 inch XtremeDrive wheels where the current parts diagram confirms the MX5861 or matching 6 inch XtremeDrive wheel replacement.
Do not assume an AdvanceDrive wheel and XtremeDrive wheel are interchangeable. The operator parts diagram should be checked before substituting any drive wheel style.
Fast wheel wear can be caused by a rough or dirty rack, gate drag, poor alignment, loose hub hardware, hydraulic drive issues, improper adjustment, or a gate that is too difficult to move.
Yes, damaged or worn lug nuts should be replaced. MX5861 is supplied with lug nuts, but the installer should still confirm the hardware matches the current wheel and hub setup.