SECO-LARM SK-B141-PQ ENFORCER Bluetooth Single-Gang Keypad with Prox

SECO-LARM SK-B141-PQ ENFORCER Bluetooth Single-Gang Keypad with Prox

The SK-B141-PQ is the single-gang weather-resistant keypad/prox controller in SECO-LARM's Bluetooth access lineup. It works well for pedestrian entrances, controlled office doors, small commercial access points, gated property entries, and similar low-voltage applications where a standalone access controller is enough. Users can be managed through the app and can be given access by keypad code, prox credential, or app-based operation depending on setup. Compared with the SK-B241-PQ, this model uses a wider single-gang style face. Compared with the SK-B111-PQ, it is the outdoor weather-resistant style. The correct choice depends on mounting style, exposure, user access method, and whether the device is controlling a lock or a gate input.

Compatible With

• Low-voltage door access control applications using an electric strike, maglock, door release, or relay-controlled input within rating
• Gate operators with an appropriate low-voltage open or access input when wired through the correct relay terminals
• Request-to-exit buttons and door sensor inputs supported by the controller wiring
• SECO-LARM SL Access app administration within Bluetooth range
• EM 125 kHz proximity credentials such as compatible SECO-LARM PR-K1K1-AQ keyfobs and PR-K1S1-A cards when prox is used
• Not a cloud access system, not a Wiegand reader output for every third-party access panel unless specifically supported by the model
• Single-gang style keypad mounting where a wider faceplate is acceptable
• Outdoor or protected installations needing IP65 weather-resistant keypad design
• Related narrow model: SK-B241-PQ mullion keypad with prox
• Related indoor model: SK-B111-PQ

Features and Specifications

Also Known As / Related Part Numbers

• SK-B141-PQ
• SKB141PQ
• SK-B141
• ENFORCER Bluetooth single-gang keypad with prox
• SECO-LARM Bluetooth access controller single-gang keypad
• Related: SK-B111-PQ
• Related: SK-B241-PQ
• Related: SK-B941-PQ
• Related: PR-B1124-PQ
• Related credentials: PR-K1K1-AQ and PR-K1S1-A

Technician Note

Choose this model when single-gang style mounting and keypad entry are preferred. Use a mullion model for narrow frames and a reader-only model when no keypad is wanted.

Before Ordering Checklist

• Confirm single-gang mounting size works for the surface.
• Confirm weather exposure and cable entry protection.
• Confirm 9-25 VDC power source.
• Confirm EM 125 kHz credential requirements.
• Confirm lock or gate input current and relay configuration.

Professional Advisory

A keypad used on a gate or secured door must be integrated without disabling monitored safety devices, emergency egress, fire release, or required access-control safeguards.

Product Questions and Answers

What is the difference between SK-B141-PQ and SK-B241-PQ?

SK-B141-PQ is the single-gang style keypad, while SK-B241-PQ is the narrower mullion style keypad.

Can it read prox cards?

Yes. It includes an EM 125 kHz proximity reader for compatible cards and fobs.

Does it require internet service?

No. Management is local over Bluetooth using the SL Access app.

Can it be used outside?

It is an IP65 weather-resistant model, but proper mounting and wiring protection are still required.

Can it control both a door and a gate?

It has a relay output that may control a compatible lock or gate input, but the exact application depends on wiring and system design.