The Transmitter Solutions RECTSSELDR318MS is a HIVE 318 MHz stand-alone indoor receiver identified for Linear-compatible radio applications. The receiver provides two control channels and is intended for compatible gate, garage door, automatic door, and other approved equipment using receiver relay inputs.
Current Transmitter Solutions documentation identifies the broader product as the Stand Alone 2 Channel Interior Receiver with manufacturer family part number RECOMMSTAIND. The current page documents a 318 MHz version with 44-memory capacity, two channels, interior installation, and 12/24 VAC/DC power.
The exact RECTSSELDR318MS SKU is not separately printed on the current public manufacturer page. Verify the physical receiver label when replacing an existing receiver or matching a specific catalog configuration.
The receiver learns compatible 318 MHz transmitter credentials and uses its two receiver channels to provide control outputs for connected equipment. A supported transmitter button can be associated with a receiver function according to the receiver's programming and relay configuration.
This is a stand-alone receiver. It should not be confused with a Wiegand receiver that sends DATA0 and DATA1 credential information to a separate access control panel.
For gate or garage applications, connect the receiver only to the operator's documented radio, access, or dry-contact control input. Do not use receiver wiring to bypass required safety devices or operator safety circuits.
These specifications are published for the current Transmitter Solutions RECOMMSTAIND Stand Alone 2 Channel Interior receiver family. The supplied RECTSSELDR318MS catalog SKU is identified as the 318 MHz Linear-compatible two-relay application.
The RECTSSELDR318MS catalog configuration is identified for Linear-compatible 318 MHz transmitter systems. Matching 318 MHz frequency alone does not prove compatibility because Transmitter Solutions also documents DoorKing-compatible and DIP-switch 318 MHz transmitter families.
Verify the transmitter protocol and existing remote model before ordering. Do not substitute a DoorKing-compatible 318 MHz DOP transmitter or a 318 MHz DIP-switch transmitter based only on frequency.
Transmitter Solutions currently documents the following programmable 318 MHz LIP transmitters with Linear compatibility references:
These are current manufacturer-documented Linear compatibility references for the individual transmitter models. Current public Transmitter Solutions documentation does not provide a direct RECTSSELDR318MS compatibility matrix listing every LIP transmitter above as a guaranteed receiver pairing. Verify the physical receiver label and existing transmitter protocol before ordering remotes.
The current Transmitter Solutions Stand Alone 2 Channel Interior receiver page identifies the 318 MHz version with 44-memory capacity.
Do not confuse this with the 433 MHz version of the same receiver family, which the manufacturer identifies with 85-memory capacity.
The public manufacturer page does not define whether the 44-memory specification counts complete remotes, transmitter codes, or individual programmed button functions. For larger installations, confirm the programming requirements and available receiver capacity before adding a large block of transmitters.
The RECTSSELDR318MS catalog description identifies a two-relay receiver, and the current manufacturer page identifies the product family as a two-channel receiver.
Exact public relay contact details for the 318 MHz version could not be fully confirmed. The manual currently linked from the manufacturer Stand Alone 2 Channel Interior receiver page is a 433 MHz SEL2641R433-IP manual and should not automatically be used as the exact relay specification or wiring manual for the 318 MHz RECTSSELDR318MS.
Verify the printed COM, NO, NC, relay, and power terminal labels on the physical 318 MHz receiver before moving existing wiring.
The current Stand Alone 2 Channel Interior receiver page documents both 318 MHz and 433 MHz versions but links to a manual identified as SEL2641R433-IP. That manual specifically documents a 433.92 MHz receiver with 85 memory positions.
Do not transfer the 433 MHz manual's 85-memory specification, exact relay terminal arrangement, timed relay programming, or radio specifications directly to RECTSSELDR318MS. The current manufacturer product page separately identifies the 318 MHz receiver version with 44 memory.
Current manufacturer documentation identifies the Stand Alone 2 Channel Interior receiver for 12/24 VAC/DC power.
Verify the available control voltage and printed receiver power terminals before installation. Do not connect mains voltage directly to the receiver.
When the existing transformer output, access control power, or operator accessory voltage is unclear, use a qualified gate, garage, automatic door, or low-voltage technician.
Transmitter Solutions identifies this receiver family as an interior model. Install the receiver in a protected indoor location or a suitable enclosure when the installation environment requires additional weather protection.
Do not assume the receiver is equivalent to the HIVE Mini Outdoor IP65 receiver family. An exterior gate operator cabinet can still expose a receiver to condensation, irrigation, insects, and water intrusion depending on the enclosure and installation.
Exact current public antenna package and range specifications for the 318 MHz RECTSSELDR318MS configuration could not be fully confirmed.
Before replacing a receiver for poor range, check:
A transmitter can light normally and still have a weak battery or radio problem. A damaged antenna or incompatible 318 MHz transmitter can also make a good receiver appear defective.
| Feature | Specification |
|---|---|
| Brand | Transmitter Solutions |
| Catalog Part Number | RECTSSELDR318MS |
| Current Manufacturer Family Reference | RECOMMSTAIND |
| Product Family | HIVE Stand Alone 2 Channel Interior Receiver |
| Product Type | Stand-alone radio receiver |
| Frequency | 318 MHz |
| Catalog Compatibility Application | Linear compatible |
| Channels | 2 |
| Relay Count | 2 as identified by the catalog configuration |
| 318 MHz Memory Capacity | 44 memory |
| Power | 12/24 VAC/DC |
| Installation Model | Interior |
| Wiegand Output | Not identified - stand-alone receiver architecture |
| Exact 318 MHz Relay Contact Layout | Confirm physical receiver terminals before wiring |
| Exact Public RECTSSELDR318MS Manual | Not separately published in current public manufacturer documentation |
| Current Family Page Manual Link | 433 MHz SEL2641R433-IP manual - do not apply all 433 MHz specifications to the 318 MHz receiver |
Current public Transmitter Solutions documentation for the Stand Alone 2 Channel Interior receiver does not provide a complete package inventory for RECTSSELDR318MS.
Do not assume transmitters, a remote coax antenna kit, power transformer, gate operator, garage door operator, or other control equipment are included. Verify the exact package and existing antenna arrangement before ordering accessories.
The biggest ordering mistake with RECTSSELDR318MS is seeing "318 MHz" and assuming every 318 MHz Linear, DoorKing, or DIP-switch remote will work. This catalog configuration is identified for Linear compatibility. Match the actual transmitter protocol and receiver label. Also do not use the 85-memory specification from the 433 MHz manual - the current manufacturer page specifically lists 44 memory for the 318 MHz interior receiver.
Document both receiver channel functions before replacing an existing two-relay receiver. A one-channel receiver or Wiegand receiver may operate on 318 MHz but will not reproduce the same stand-alone control architecture.
Verify the physical relay and power terminal markings before moving wiring. The current manufacturer page links to a 433 MHz manual, so the 433 MHz terminal and programming details should not automatically be transferred to the 318 MHz RECTSSELDR318MS.
For unknown operator wiring, damaged low-voltage power circuits, or relay connections that are not clearly identified, use a qualified gate, garage, automatic door, or access control technician. Do not bypass photo eyes, monitored safety edges, entrapment protection, door reversal systems, emergency access, or other required safety circuits.
Yes. The supplied RECTSSELDR318MS catalog configuration identifies a HIVE 318 MHz indoor two-relay stand-alone receiver. Current Transmitter Solutions documentation for the related RECOMMSTAIND family confirms a two-channel interior receiver with a 318 MHz version.
The current Transmitter Solutions Stand Alone 2 Channel Interior receiver page identifies the 318 MHz version with 44-memory capacity. Do not use the 85-memory specification from the 433 MHz version for this 318 MHz receiver.
No. Matching 318 MHz frequency alone does not prove compatibility. The RECTSSELDR318MS catalog configuration is identified for Linear compatibility, while Transmitter Solutions also documents DoorKing-compatible and DIP-switch 318 MHz transmitter families.
Transmitter Solutions currently documents LUNA, Monarch, Stingray, and PLAY 318 MHz LIP transmitter models with Linear compatibility references. Exact direct pairing with RECTSSELDR318MS is not separately published, so verify the receiver label and existing transmitter protocol before ordering.
No. HIVE318WSA is a separate one-channel programmable receiver with 1,000-user capacity, LCD programming, and Linear MegaCode transmitter compatibility. RECTSSELDR318MS is identified as an indoor two-relay receiver in the 44-memory 318 MHz stand-alone receiver family.
Do not automatically use the 433 MHz manual as the exact 318 MHz wiring reference. The current manufacturer page links to a SEL2641R433-IP manual, but that manual documents a 433.92 MHz receiver with 85 memory positions. Verify the printed terminals on RECTSSELDR318MS before wiring.
Transmitter Solutions identifies the related Stand Alone 2 Channel receiver as an interior model. Use a suitable protected installation or enclosure when environmental exposure is possible and do not assume the receiver has the IP65 protection of the HIVE Mini Outdoor family.
Verify the RECTSSELDR318MS part label, 318 MHz Linear-compatible transmitter protocol, two-relay requirement, 44-memory capacity, relay terminal functions, 12/24 VAC/DC power, indoor installation environment, antenna arrangement, and exact package contents.