GTO Hardware Bag for 2000XL(S) series &,2500 and MM series
This hardware bag supports the mechanical connection points on compatible swing gate opener arms. Missing or worn installation hardware can create arm movement, bracket slop, noisy travel, or unsafe gate behavior. Replacing the correct hardware helps keep the opener arm mounted securely and aligned with the bracket geometry intended by the manufacturer.
Compatible With
- GTO / Linear PRO 2000XL series swing gate operators
- GTO / Linear PRO 2000XLS series swing gate operators
- GTO / Linear PRO 2002XL and 2002XLS dual-arm references when one bag is needed per arm
- GTO / Linear PRO 2500, 2502, and 2550 references where listed by parts diagrams
- GTO / Linear PRO 3000XL and 3000XLS references in some service listings
- Mighty Mule MM350, MM500, MM502, and related MM series references where the hardware bag is called out
- Mighty Mule FM350, FM500, and FM502 references in compatible hardware listings
Also Known As / Related Part Numbers
- H101P
- LIN-H101P
- GTO H101P
- Linear H101P
- Mighty Mule H101P
- Hardware Bag for 2000XL(S)
- Hardware Bag for 3000XL / 2000XL series and 2500
- Related R4027 reference may appear in some hardware-bag listings
Features & Specifications
| Manufacturer | GTO / Linear |
|---|
| Product Type | Replacement hardware bag |
|---|
| Part Number | H101P |
|---|
| Application | Small installation hardware for select swing gate opener arms |
|---|
| Compatible Operator Type | Residential swing gate opener arms |
|---|
| Included Components | Hardware bag contents vary by packaging and model reference |
|---|
| Notes | Not a complete bracket set; compare with HB100 when major brackets are needed |
|---|
Technician Note
Order one hardware bag per opener arm when replacing missing arm hardware. If the post bracket, gate bracket, or captured bracket is damaged, the H101P bag alone may not solve the problem.
Before Ordering Checklist
- Confirm the opener model and series from the arm label
- Check whether you need small hardware only or a complete bracket set
- Inspect brackets for elongation, cracks, or bent steel before reusing them
- For dual gates, confirm whether one or two hardware bags are needed
- Compare the parts diagram if the operator is an older XL, newer XLS, or Mighty Mule branded model
Professional Advisory
Loose or missing swing arm hardware can create unsafe gate movement. Shut down the gate and have a qualified technician inspect the arm and brackets if the gate shifts, drops, binds, or moves unpredictably.
Important Ordering Warnings
- H101P is not the same as HB100
- Some compatibility lists include multiple GTO and Mighty Mule generations, but hardware requirements can vary by arm and bracket style
- Do not reuse bent or badly worn brackets just because the small hardware was replaced
- Dual gate systems may require hardware for each arm
Product Questions & Answers
Is H101P a full mounting bracket kit?
No. H101P is a hardware bag for select opener arms. If you need post brackets, gate brackets, or captured gate brackets, look at the correct bracket kit such as HB100 where applicable.
How many H101P bags do I need for a dual gate?
Most service situations require one hardware bag per arm, so a dual swing gate may require two if both arms need hardware.
Will H101P fit Mighty Mule openers?
It is commonly associated with several Mighty Mule and FM series operators, including MM350, MM500, MM502, FM350, and FM500 references, but the model and parts diagram should be checked.
What symptoms point to missing or worn hardware?
Common symptoms include loose arm movement, rattling, bracket slop, uneven opening, worn pin holes, or missing clevis clips.
Can I use hardware-store bolts instead?
Use the correct manufacturer-style hardware whenever possible. Incorrect bolt diameter, length, or pin style can change the arm geometry and may create unsafe movement.
