Product Description
Genie Series II Multi-Function Hard-Wired Wall Console with Slide-Lock Vacation Lockout. The Multi-Function Wall Console (part number Genie GBWC-SL2-BX) is compatible with Genie ChainLift 600, Genie QuietLift 600, Genie 1022 and other systems. Key attributes include: Open and close garage door via dedicated push button.
Key Features
- Open and close garage door via dedicated push button
- Independent light control button for toggling opener light without door activation
- Sure-Lock slide-switch vacation lockout disables all remotes and keypads for enhanced security
- Backlit panel with large, easy-to-press buttons for visibility in low-light conditions
- Hard-wired installation with two-conductor connection - no batteries or wireless pairing required
- Compatible with Genie Series II IntelliCode and CodeDodger openers from approximately 1995 onward
Compatibility Guide
- Genie ChainLift 600
- Genie QuietLift 600
- Genie 1022
- Genie 1024
- Genie 1026
- Genie IntelliCode Series II openers
- Genie CodeDodger Series II openers
- Genie residential garage door openers manufactured approximately 1995 and later with Series II electronics
Professional Specs
| Feature | Specification |
| Model | Genie GBWC-SL2-BX |
| Item Type | Multi-Function Wall Console |
| Contact Configuration | Hard-wired two-conductor connection to opener logic board |
| Mounting | Wall-mounted, two-screw installation, hard-wired to opener logic board terminal strip |
| Alternate Part Numbers | GBWCSL2, GBWC-BX, GBWC2-BX, GPWC-BX, 37351R, 34299R, 38066R, 39165R |
| Replaces / Superseded Part Numbers | 34299R, 37351R, 38066R, 39165R |
Frequently Asked Questions
Q: What does the Sure-Lock feature do and how do I activate it?
A: The Sure-Lock vacation lock is activated by sliding the lock switch on the console face. When engaged, it disables all wireless remotes and keypads so the garage door cannot be operated remotely, providing added security while you are away.
Q: Is the GBWC-SL2-BX wireless or does it require wiring?
A: The GBWC-SL2-BX is hard-wired and connects directly to the two-conductor terminal strip on compatible Genie Series II opener logic boards. No batteries are required and no wireless pairing is needed.
Q: Can I control the garage light independently of the door?
A: Yes. This console includes a dedicated light button that toggles the opener's built-in light on and off independently of door operation, allowing you to control garage lighting without activating the door.
Q: Which Genie opener models is this wall console compatible with?
A: The GBWC-SL2-BX is designed for Genie Series II IntelliCode and CodeDodger residential garage door openers produced approximately from 1995 onward, including models such as ChainLift 600, QuietLift 600, and 1022/1024/1026. It is not intended for Series I or non-Genie openers.
Q: How difficult is it to install the GBWC-SL2-BX?
A: Installation requires only two screws to mount the console to the wall and two wires connected to the opener's wall-control terminals. No special tools or programming steps are needed beyond the physical connection.