HySecurity MX001307, TIMER, 24 HR, 7 DAY
The HySecurity MX001307 timer clock is a scheduling accessory, not a receiver or safety device. When installed and programmed correctly, it can send a time-clock open command that holds the gate open according to a weekly schedule. This is useful for commercial entrances, loading areas, schools, gated facilities, and delivery access windows where the gate should remain open only during selected days and times. HySecurity Smart Touch documentation references a 24-hour/7-day timer option and shows connections for timer power, common, and the time clock open input. Because scheduled access can affect site security, the timer should be coordinated with the access-control plan, close timer settings, emergency access requirements, and monitored entrapment protection. Do not install a timer as a workaround for a failed access-control system or missing safety device.
Compatible With
This compatibility section is written cautiously because HySecurity parts can vary by operator generation, voltage, controller, installed options, and parts diagram revision.
- Select HySecurity operators and Smart Touch Controller applications that support a time clock open input
- SlideDriver and other Smart Touch controlled industrial HySecurity operators when the manual calls for the 24-hour/7-day timer option
- Commercial gate sites needing scheduled open periods for business hours or deliveries
- Applications using terminal #7 Time Clock Open on compatible Smart Touch Controller references
- Not a replacement for a loop detector, radio receiver, keypad, access controller, or safety sensor
Features and Specifications
| Manufacturer | HySecurity / Nice HySecurity |
|---|
| Part Number | MX001307 |
|---|
| Product Type | Programmable timer clock |
|---|
| Schedule Type | 24 hour / 7 day |
|---|
| Application | Scheduled open command / time clock open input |
|---|
| Controller Reference | Smart Touch Controller applications where supported |
|---|
| Connection Notes | Typically uses 24V, common, and time clock open input per compatible manual |
|---|
| Notes | Programming and wiring should be performed by a qualified technician |
|---|
Also Known As / Related Part Numbers
- MX001307
- HYS-MX001307
- Timer Clock
- 24 hour 7 day timer
- 24/7 hour clock timer
- HySecurity weekly timer
- Time Clock Open timer
Technician Note
Before replacing MX001307, compare the installed part, operator model, voltage or control type, and HySecurity parts diagram. Similar HySecurity accessories can look close in photos but serve different operator families or voltage configurations.
Before Ordering Checklist
- Confirm the HySecurity part number on the existing part or current parts diagram.
- Verify the operator model, generation, controller type, and installed options.
- Check voltage, wiring terminals, enclosure rating, and mounting location when applicable.
- Confirm whether the job requires a complete kit, a subcomponent, or a different voltage/model version.
- For safety devices, confirm the required monitored input type and do not bypass entrapment protection.
Professional Advisory
Electrical wiring, heater kits, and monitored entrapment devices should be installed by a qualified gate technician. Do not bypass required safety devices or substitute parts by appearance alone.
Important Ordering Warnings
- HySecurity part numbers with similar names are not always interchangeable.
- Voltage-specific heater kits and control accessories must match the operator data plate and wiring diagram.
- StrongArm, SlideDriver, SlideDriver II, SlideSmart HD, and Smart Touch/Smart DC accessories should be kept separate unless HySecurity documentation confirms fitment.
- For older operators, verify whether the installed system has been upgraded or retrofitted before ordering.
Product Questions and Answers
What does the MX001307 timer do?
It provides scheduled gate control, commonly used to hold a compatible HySecurity gate open during programmed days and times.
Does MX001307 open the gate by itself?
It sends a timed command through the operator input when wired and programmed correctly. The operator and safety system must still function properly.
Which input is commonly used for this timer?
HySecurity Smart Touch references show a Time Clock Open input used with the 24-hour/7-day timer option.
Can this replace an access control system?
No. It is a scheduling accessory and should be used only as part of a proper access-control plan.
What should be checked before ordering?
Check the controller type, available time-clock input, supply voltage, required schedule, security plan, and operator manual.
