HySecurity MX002599-P, RACK KIT, XTREMEDRIVE, 25"
HySecurity MX002599-P is a 25 inch XtremeDrive rack kit used with the HySecurity SlideDriver XtremeDrive system. The XtremeDrive rack mounts to the underside of the drive rail so the cogged lower wheel can engage the rack and maintain traction in demanding slide gate installations. It is commonly used when a SlideDriver is being built or retrofitted for heavy, stiff, wind-loaded, dusty, icy, sandy, or otherwise difficult gate conditions. The XtremeDrive system is associated with all SlideDriver models, is standard on some SlideDriver 80 and 200 configurations, and is a retrofit option for select SlideDriver 15, 30F, 40, and 50VF models. This rack kit should be installed with the correct rack install kit and drive wheel parts so rail height, fastener layout, and wheel engagement are correct.
Compatible With
- HySecurity SlideDriver operators using the XtremeDrive rack and wheel system
- SlideDriver 15, 30F, 40, and 50VF retrofit applications when XtremeDrive is specified
- SlideDriver 80 and SlideDriver 200 configurations using factory XtremeDrive components
- SlideDriver II / SD2 series applications when the parts diagram calls for the 25 inch XtremeDrive rack kit
- Drive rails with proper clearance and rail height for XtremeDrive rack mounting
Features and Specifications
| Manufacturer | HySecurity / Nice |
|---|
| Part Number | MX002599-P |
|---|
| Related Base Part | MX002599 |
|---|
| Product Type | XtremeDrive rack kit |
|---|
| Rack Length | 25 inch |
|---|
| Application | SlideDriver XtremeDrive traction system |
|---|
| Related Install Tool Kit | MX002750 |
|---|
| Notes | Rail height and clearance must be verified before retrofit installation |
|---|
Also Known As / Related Part Numbers
- MX002599-P
- MX002599
- XtremeDrive rack kit, 25 inch
- SlideDriver XtremeDrive rack
- 25 inch Xtreme Drive rack kit
Technician Note
The rack and wheel must be aligned correctly. Poor gate alignment, worn drive wheels, or an incorrect rail height can cause noise, accelerated wear, or unreliable traction even with new rack installed.
Before Ordering Checklist
- Confirm the operator uses or is being converted to XtremeDrive
- Measure rack length needed along the drive rail
- Confirm the matching XtremeDrive wheel size and hub style
- Verify proper drive rail clearance, especially on flanged rail
- Use the MX002750 install kit or approved installation method when required
Professional Advisory
XtremeDrive retrofit work involves drilling and aligning the drive rail. A trained HySecurity technician should verify the gate rolls freely and the operator is adjusted correctly before commissioning.
Important Ordering Warning
XtremeDrive is a traction improvement system, not a fix for a damaged gate, dragging wheels, bad guide rollers, or a misaligned operator.
Product Questions and Answers
What is HySecurity MX002599-P used for?
HySecurity MX002599-P is used as a replacement 25 inch XtremeDrive rack kit in HySecurity SlideDriver XtremeDrive slide gate applications. Match it to the original part number and the operator parts diagram before ordering.
How do I confirm MX002599-P is the correct part?
Compare the part number on the existing component, the operator model, the control system generation, and the physical or electrical specifications shown in the parts diagram.
Is MX002599-P used by itself?
No. It works as part of the XtremeDrive rack and wheel system and should be matched with the correct wheel, wheel hub, and installation tooling when required.
Can this rack be used on a flanged drive rail?
Some XtremeDrive references allow flanged rail use only when clearance and rail setup are correct. Verify the rail style and clearance before ordering.
Should a technician install MX002599-P?
A qualified gate technician is recommended whenever the repair involves electrical wiring, stored energy, moving gate hardware, hydraulic components, or safety-related operation.
