HySecurity MX3691, Hand Crank, 10 inch L Square Drive
The HySecurity MX3691 hand crank is a service tool for supported StrongArm M30/M50 square-drive gearbox assemblies. In manual or no-power StrongArm configurations, the crank provides the mechanical leverage needed to operate the barrier through the square drive gearbox during service, adjustment, or emergency operation. The 10 inch length gives the technician a controlled handle without using improvised tools that can round the drive, damage the gearbox, or create unsafe motion. Because barrier arms are heavy and can move unexpectedly if counterbalance or linkage components are damaged, the operator should be secured and serviced according to HySecurity instructions before hand-crank use.
Compatible With
- Manual StrongArm M30/M50 systems with square drive gearbox where MX3691 is specified
- StrongArm M30/M50 NP no-power style applications where the 10 inch hand crank is listed
- HySecurity barrier operators using the OEM square-drive hand crank interface
- Not a universal crank for WedgeSmart DC, SlideDriver, SlideSmart, HydraSwing, HydraWedge, or powered operators without the matching gearbox interface
- Related to StrongArm M30/M50 manual operation and service accessories
Features and Specifications
| Manufacturer | HySecurity / Nice HySecurity |
|---|
| Product Type | Manual hand crank |
|---|
| Part Number | MX3691 |
|---|
| Application | StrongArm M30/M50 square drive gearbox manual operation |
|---|
| Length | 10 inch reference |
|---|
| Drive Type | Square drive |
|---|
| Compatible Operator Type | Select manual / no-power barrier operators |
|---|
| Notes | Do not use as an improvised tool on unsupported gearboxes |
|---|
Also Known As / Related Part Numbers
- MX3691
- HYS-MX3691
- HySecurity MX3691
- Nice HySecurity MX3691
- Hand Crank 10 inch L Square Drive
- 10 inch Square Drive Hand Crank
- StrongArm M30/M50 Hand Crank
- StrongArm NP Hand Crank
Technician Note
This is an OEM HySecurity service part. Match the part number, operator model, original assembly, and current parts diagram before ordering. Similar HySecurity parts can look close but may use different dimensions, wiring, connectors, handing, or operating functions.
Before Ordering Checklist
- Confirm the HySecurity operator model and product family.
- Compare the original part number or parts diagram to MX3691.
- Check related components for wear, damage, corrosion, fluid leaks, heat damage, or misalignment.
- Verify voltage, wiring, connector style, mechanical size, handing, and hardware where applicable.
- Do not bypass safety devices, circuit protection, or required entrapment protection while diagnosing the operator.
Professional Advisory
Gate and barrier operators can move heavy equipment and may include stored energy, hydraulic pressure, battery power, and high-voltage circuits. If the system is damaged, leaking, repeatedly tripping a breaker, moving unpredictably, or missing required safety devices, have it inspected by a qualified gate technician before returning it to service.
Product Questions and Answers
What is MX3691 used for?
MX3691 is a 10 inch hand crank for supported HySecurity StrongArm M30/M50 square-drive gearbox applications.
Does it fit powered StrongArm units?
Only if the specific operator and gearbox parts diagram call for this crank. Do not assume fitment by operator name alone.
Can I use a socket or homemade crank instead?
Using improvised tools can damage the gearbox or create unsafe movement. Use the correct OEM crank when the operator supports it.
Is this for WedgeSmart or SlideDriver?
No. MX3691 is associated with StrongArm M30/M50 square-drive manual operation, not WedgeSmart or SlideDriver operation.
What should be checked before manual cranking?
Verify the arm is safe, the mechanism is not damaged or bound, and the operator instructions allow hand-crank operation.
