HySecurity MX4078, MOTOR, 50 HZ, 1PH, 1HP, 1425RPM
The HySecurity MX4078 is a replacement electric motor listed as 50 Hz, single phase, 1 HP, 1425 RPM. It is intended for select HySecurity gate operator service where the original motor label or parts diagram calls for this exact motor.
Motor replacement is one of the highest-risk compatibility areas on a gate operator. Horsepower alone is not enough. Frequency, phase, voltage, shaft size, mounting, rotation, overload protection, capacitor or start components, pulley/gear interface, and wiring diagram all need to match the installed operator.
This motor should be used carefully in markets or installations built around 50 Hz power. Do not substitute a 60 Hz motor or a three-phase motor unless HySecurity documentation supports that change. If the old motor failed, also inspect the drive train, brake, gearbox, bearings, gate movement, and electrical supply for the root cause.
Compatible With
- Select HySecurity slide gate systems where MX4078 is specified by the parts diagram or motor label.
- Select HySecurity barrier gate systems where MX4078 is specified by the parts diagram or motor label.
- HySecurity 50 Hz, 1 phase, 1 HP, 1425 RPM motor applications.
- International or 50 Hz power installations where the operator was built for this motor specification.
- Not interchangeable by appearance with 60 Hz motors, 3 phase motors, different horsepower motors, different RPM motors, or motors with different shaft/frame/wiring configurations.
Features & Specifications
| Manufacturer | HySecurity / Nice HySecurity |
|---|
| Part Number | MX4078 |
|---|
| Product Type | Electric motor |
|---|
| Application | Replacement motor for select HySecurity gate operators |
|---|
| Horsepower | 1 HP |
|---|
| Frequency | 50 Hz |
|---|
| Phase | 1 phase |
|---|
| Speed | 1425 RPM |
|---|
| Compatible Operator Type | Select HySecurity slide or barrier systems where specified |
|---|
| Notes | Verify motor nameplate, voltage, shaft, frame, rotation, and wiring diagram |
|---|
Also Known As / Related Part Numbers
- MX4078
- HYS-MX4078
- Nice HySecurity MX4078
- HySecurity motor 50Hz 1PH 1HP 1425RPM
- HySecurity 1 HP 50 Hz motor
- HySecurity single phase 50 Hz motor
- Common search variation: MX4078 1HP 1425 RPM
- Do not confuse with 60 Hz HySecurity motors
- Do not confuse with 3-phase HySecurity motors
Technician Note
When a motor fails, check for gate drag, gearbox binding, failed brake parts, incorrect voltage, overheated wiring, bad capacitors, and overloaded duty cycle. Replacing only the motor may not solve the problem if the drive system is overloaded.
Before Ordering Checklist
- Match the motor label to MX4078.
- Confirm frequency is 50 Hz and phase is single phase.
- Verify horsepower, RPM, voltage, frame, shaft, mounting, and rotation.
- Inspect the operator wiring diagram and overload protection.
- Check gate movement and drive-train condition before energizing the new motor.
Professional Advisory
Motor wiring and testing involve hazardous voltage and moving equipment. A qualified gate technician should perform installation, verify rotation, confirm current draw, and test safety devices after replacement.
Product Questions & Answers
What are the main specs for MX4078?
MX4078 is listed as a HySecurity 50 Hz, single phase, 1 HP motor with 1425 RPM speed.
Can I replace a 60 Hz motor with MX4078?
Do not assume that is acceptable. The operator must be designed for the 50 Hz motor specification and the wiring diagram must support it.
Is MX4078 a three-phase motor?
The uploaded product and one public listing identify MX4078 as 1 phase. Some search snippets may be inconsistent, so verify the motor nameplate before upload or installation.
What must be checked before ordering this motor?
Check part number, voltage, phase, frequency, horsepower, RPM, shaft, frame, mounting, wiring diagram, and operator model.
What can cause a replacement motor to fail early?
Gate drag, binding gearboxes, brake problems, incorrect voltage, wrong phase/frequency, bad capacitors, and excessive duty cycle can all damage a motor.
