Linear 2110-161, Plate Mtg Main Frame GSWG
The Linear 2110-161 is a replacement main frame mounting plate assembly used on select Linear / OSCO GSWG and VS-GSWG swing gate operators. It serves as a structural mounting component inside the operator frame and helps keep the drive and enclosure components aligned.
This part is most often needed during a frame rebuild, collision repair, corrosion repair, or major mechanical service. A bent or weakened mounting plate can create alignment issues that show up as vibration, uneven wear, cabinet fitment problems, or stress on connected drive parts.
Because the GSWG and SWG product families use different structural parts, the 2110-161 should be confirmed as the GSWG/VS-GSWG plate before ordering. It should not be confused with the SWG main frame plate or other similar-looking fabricated parts.
Compatible With
This plate is tied to the GSWG/VS-GSWG frame layout. Verify by parts diagram before ordering.
- Linear / OSCO GSWG swing gate operator applications where 2110-161 is specified
- Linear / OSCO VS-GSWG operator parts diagrams listing 2110-161
- Commercial swing gate operator frame repairs requiring the GSWG main frame mounting plate
- Not the same as the Linear 2110-164 SWG mounting plate
- Not a universal replacement for all Linear / OSCO swing gate operators
Features and Specifications
| Manufacturer | Linear / OSCO |
|---|
| Product Type | Main frame mounting plate assembly |
|---|
| Part Number | 2110-161 |
|---|
| Application | Select GSWG and VS-GSWG swing gate operators |
|---|
| Compatible Operator Type | Commercial swing gate operator structural service part |
|---|
| Material / Finish | Manufacturer service plate; finish may vary |
|---|
| Included Components | Mounting plate assembly only unless otherwise stated |
|---|
| Notes | Do not confuse with 2110-164 SWG plate |
|---|
Also Known As / Related Part Numbers
- 2110-161
- LIN-2110-161
- Plate Mtg Main Frame GSWG
- Mounting Panel Assembly
- Main Frame Mounting Plate for VS-GSWG
- GSWG mounting plate
Technician Note
If this plate is being replaced because of impact damage, check the gate hinges, operator mounting posts, arm geometry, and drive components before returning the operator to service.
Before Ordering
- Confirm the parts diagram lists 2110-161
- Verify the operator family is GSWG or VS-GSWG
- Compare the old plate for cracks, bending and hole alignment
- Inspect connected brackets, bearings and frame members
- Do not order 2110-164 unless the operator is an SWG model requiring that plate
Professional Advisory
Structural operator repairs should be performed with the gate secured and operator power disconnected. If welding, cutting, or high-voltage disconnection is needed, use a qualified gate technician.
Important Ordering Warnings
- 2110-161 is not the same as 2110-164
- A damaged mounting plate may indicate impact or frame problems elsewhere
- Incorrect plate selection can cause alignment and drive wear issues
- Do not operate a gate with loose or damaged structural mounting components
Product Questions and Answers
What operator family uses the 2110-161 mounting plate?
The 2110-161 is commonly associated with Linear / OSCO GSWG and VS-GSWG swing gate operator parts diagrams.
Is 2110-161 interchangeable with 2110-164?
No. 2110-161 is the GSWG/VS-GSWG plate, while 2110-164 is associated with SWG applications.
When should this plate be replaced?
Replace it when it is bent, cracked, badly corroded, missing, or causing alignment problems in the operator frame.
Does this part include the full operator frame?
No. It is a mounting plate assembly, not a complete operator or cabinet rebuild kit.
Should other parts be inspected at the same time?
Yes. Check brackets, bearings, drive parts, cabinet hardware, and gate alignment when a structural plate is damaged.
