Flange bearing, 1/2 inch bore, 3/4 inch flange OD, 1 inch length, for Linear/OSCO gate operator shafting. Flange Bearing for use in Linear and OSCO gate operator drive systems. Constructed from Not verified by manufacturer; typically sintered bronze or thermoplastic composite. Key dimension: 1/2 inch bore x 3/4 inch flange OD x 1 inch length. Flange-mount.
A: It is a flange bearing with a 1/2 inch bore, 3/4 inch flange outside diameter, and 1 inch overall length, used in Linear and OSCO gate operator assemblies.
A: The flange bearing supports rotating shafts in the gate operator drive train, providing radial and axial load support at mounting surfaces.
A: No manufacturer-verified material specification is available, but flange bearings of this type are typically made from sintered bronze or thermoplastic composite.
A: No manufacturer-published load rating data is available for this specific part number.
A: No verified legacy or alternate part numbers have been identified for this part.
