Oil-impregnated flange bearing, 5/16 x 7/16 x 3/8 inch LTB type, for Linear/OSCO gate operators. Flange Bearing manufactured by Linear (part number 2200-332). Compatible with Linear gate operators, OSCO gate operators and related gate operator systems. Dimensions: 5/16 in ID x 7/16 in OD x 3/8 in length. Constructed from Sintered oil-impregnated metal (likely bronze).
A: It is an oil-impregnated flange bearing of LTB type with dimensions 5/16-inch ID, 7/16-inch OD, and 3/8-inch length, used as a shaft bearing in Linear and OSCO gate operators.
A: It is an oil-impregnated sintered bronze or sintered metal bearing, meaning the lubricant is stored within the bearing material and released during operation without external greasing.
A: The flange provides a shoulder that locates the bearing axially in its housing, preventing it from pushing through while allowing simple press-fit installation.
A: Replace this bearing when you observe shaft wobble, unusual noise from a rotating component, or visible wear on the shaft journal at the bearing location.
A: Confidence is low due to limited official published data. The dimensions 5/16 x 7/16 x 3/8 in and LTB type are derived from the part title only. Verify with Linear/OSCO technical support before ordering.
