Motor shaft pulley, 1-1/2 inch diameter, 1/2 inch bore, for V-belt drive. Motor Pulley manufactured by Linear (part number 2200-411). Compatible with Linear gate operators with V-belt drive systems, OSCO gate operators with V-belt drive systems and related gate operator systems. Dimensions: 1-1/2 inch OD, 1/2 inch bore.
A: The 2200-411 is a motor pulley that mounts on the motor shaft of Linear/OSCO gate operators. It is used in V-belt drive systems to transfer power from the motor to the gate mechanism.
A: The pulley has a 1-1/2 inch outer diameter and a 1/2 inch bore, making it suitable for motor shafts with a 1/2 inch diameter.
A: The 2200-411 is used in Linear/OSCO gate operators that use a V-belt drive system to transmit power from the motor to the gate drive mechanism.
A: Check your operator manual for the correct V-belt cross-section profile required. The pulley groove profile must match the belt type used in your specific operator model.
A: Confirm that your motor shaft diameter is 1/2 inch and that the correct V-belt profile is used. Inspect the set screw or keyway retention method as specified in your operator manual.
