Product Overview
The MMTC 1KFS is a tamperproof flush-mount key switch built for controlled operation of gate operators, commercial door operators, overhead door systems, parking controls, and access-control circuits. It gives authorized users a keyed control point for open and close commands without leaving an exposed push button where the public can easily operate the equipment. This is especially helpful at secured entrances, service doors, gated communities, commercial buildings, maintenance areas, and parking facilities where only approved personnel should be able to move the gate or door.
This KFS version adds a local stop button in the same tamperproof station. That matters on commercial gate and door controls where authorized users need a key-operated open or close command but still need an obvious stop command at the control point. The stop button is only useful when it is wired to a compatible stop input or control circuit; it should not be used as a shortcut around required safety devices.
The NEMA 1 interior model is selected for protected indoor spaces such as guard offices, equipment rooms, vestibules, commercial door control areas, and interior access-control panels. It should not be treated as the same item as an exterior weather-resistant key switch.
The important detail with this product family is not just the key switch shape. Correct fitment depends on the switch function, cylinder style, flush-mount dimensions, indoor or exterior rating, and the way the operator control board expects the open, close, and stop contacts to be wired. A similar-looking MMTC key switch may use a different cylinder format or may be intended for a different mounting style, so the installed part number and wiring diagram should be checked before ordering.
Compatible With
The MMTC 1KFS is compatible by control-circuit function, not by one single operator model. Use it where the equipment accepts the same open-close key switch input and the installation matches the rating and mounting style.
- Compatible with gate operators, overhead door operators, commercial door controls, parking controls, barrier gate controls, and access-control panels that accept dry-contact open and close key switch inputs.
- Commonly used with swing gate operators, slide gate operators, rolling doors, sectional overhead doors, security grilles, parking gates, dock doors, and controlled service entrances when the control board provides separate open and close terminals or a matching key switch input.
- May be used with many brands of gate and door equipment, including LiftMaster, Chamberlain, Linear, Nice, Apollo, DoorKing, FAAC, HySecurity, Viking, US Automatic, All-O-Matic, Ramset, Genie, Marantec, and other systems only when the input wiring and control logic match.
- For replacement work, match the original MMTC family, indoor/exterior rating, flush-mount box size, cylinder type, switch function, and contact requirements before ordering.
- The stop-button versions are appropriate only where the operator has a compatible stop circuit or control input. Do not assume the stop button can be added to every two-wire open-close circuit without checking the wiring diagram.
- Use NEMA 1 interior 1KF/1KFS family models in protected indoor locations; use matching 1KFX/1KFSX exterior models for outdoor flush-mount installations.
Features and Specifications
| Manufacturer | MMTC |
| Product Type | Tamperproof key switch |
| Part Number | 1KFS |
| Product Family | 1KFS interior flush-mount open-close with stop key switch family |
| Mounting Style | Flush mount |
| Environment / Rating | NEMA 1 |
| Switch Function | Open-Close with center return and separate Stop button |
| Cylinder Type | Standard 5-pin mortise cylinder |
| Contact Rating | 15A at 125/250VAC where specified by MMTC |
| Faceplate Dimensions | 6 in H x 4-3/4 in W x 2-7/8 in D |
| Back Box Dimensions | 3-3/4 in H x 3-3/4 in W |
| Application | Interior tamper-resistant key control |
| Notes | For low-voltage or line-voltage control circuits only when the system wiring diagram supports this switch function |
Also Known As / Related Part Numbers
Technician Note
Standard mortise cylinder style for common keyed control applications. When replacing an existing station, check the switch contacts with the operator manual before moving wires to the new switch. Many gate and door operators use low-voltage control inputs, but some older or commercial installations may bring higher voltage to the station. If the circuit voltage or terminal function is not clear, have the wiring checked by a qualified gate or door technician.
Before Ordering Checklist
- Confirm the exact MMTC part number and suffix on the old switch or site paperwork.
- Match interior versus exterior use; do not use a NEMA 1 interior station in an exposed outdoor location.
- Confirm flush-mount dimensions and back-box clearance before replacing a single-gang or surface-mount station.
- Match the cylinder format to the site key system: standard mortise, Best/equivalent, changeable core, or S Type large format.
- Confirm whether the control circuit requires open-close only or open-close with a stop button.
- Verify the operator wiring diagram and use a qualified technician for high-voltage or unfamiliar control wiring.
Professional Advisory
This key switch is a control accessory, not an entrapment protection device. Do not use any key switch to bypass photo eyes, safety edges, monitored safety inputs, UL 325 requirements, or other required safety devices. For exterior gates, damaged wiring, unknown voltage, nuisance stopping, or unsafe gate movement, diagnosis should be handled by a qualified gate technician.
Product Questions and Answers
What is the MMTC 1KFS used for?
The MMTC 1KFS is used as a keyed open-close control station for compatible gate operators, commercial door operators, overhead door controls, and access-control circuits that accept dry-contact key switch inputs.
Can this 1KFS key switch be used inside?
This model is a NEMA 1 interior key switch and should be used in protected indoor locations, control rooms, vestibules, or other dry interior areas.
What cylinder style does the MMTC 1KFS use?
This version is supplied around a standard mortise cylinder. Match the replacement to the site's existing key system, because Best, changeable core, large format, and standard mortise-cylinder versions are not the same.
Why choose the MMTC 1KFS with a stop button?
The stop button gives the user a separate stop command at the control station, which is useful when the operator control board supports a stop input and the site wants open-close key operation plus local stop control.
Is the MMTC 1KFS a universal replacement for any key switch?
No. It should be matched by mounting style, environment rating, switch function, cylinder type, control-circuit wiring, and operator input requirements before ordering.
[ITEMPRICE]