REIGN XRE-100 Wireless Relay Extender Technical Details
The REIGN XRE-100 is a wireless relay extender used to send relay-control signals across distance where trenching new control wire is difficult, costly, or impractical. It is commonly used around automated gates, commercial doors, agricultural entrances, security systems, remote buildings, and other access-control points that can accept a dry-contact relay trigger.
This item should be treated as the XRE-100 relay extender only unless the listing or order specifically includes a TX-100 transmitter. The kit version and transmitter-only version are separate related items.
What This Part Does
The XRE-100 acts as a long-range wireless relay interface. Instead of running a control wire between two locations, the REIGN system can transmit a relay event wirelessly when paired with compatible REIGN equipment. The connected equipment still needs a safe, compatible control input.
- Provides wireless relay extension for select gate, door, alarm, and access-control applications
- Helps reduce trenching for low-voltage control signal runs
- Uses two independent relay channels for flexible control layouts
- Supports REIGN TX-100 transmitters and compatible XRE-100 ecosystem devices
- Designed for long-range outdoor and commercial relay signaling applications
Compatible With
The XRE-100 may be used with select systems that accept a standard dry-contact relay input and where the REIGN wireless ecosystem is properly paired and powered.
- REIGN TX-100 transmitters where paired correctly
- Other REIGN XRE-100 units in supported relay-extension layouts
- Gate operators with compatible dry-contact open, close, cycle, or auxiliary inputs
- Commercial door controls with compatible low-voltage command inputs
- Security or alarm panels using compatible relay input or output circuits
- Remote relay-control installations where power and antenna placement are suitable
Important Compatibility Warning
The XRE-100 is not a universal remote receiver for every transmitter brand. It relies on the REIGN wireless system for communication. It also does not replace proper gate operator safety wiring, photo eyes, safety edges, fire access, emergency release, or code-required entrapment protection.
Similar Parts That Are Not Automatically Interchangeable
- REIGN TX-100 transmitter - handheld transmitter only, not the relay extender receiver
- REIGN XRE-100 kit - includes a transmitter package where listed, unlike the extender-only item
- Standard gate receiver - may accept remotes but will not provide the same long-range relay extension
- Cellular access controller - uses cellular service and cloud management rather than REIGN radio relay extension
Features and Specifications
| Specification | Details |
|---|
| Brand / Family | REIGN / Transmitter Solutions |
| Model | XRE-100 |
| Product Type | Wireless relay extender |
| Power Input | 12/24V AC/DC |
| Relay Rating | 10A at 250VAC / 28VDC |
| Relay Channels | Two independent relay channels |
| Memory Capacity | Up to 150 transmitters |
| Published Range | Up to 40 miles line of sight; about 1/2 mile through severe obstructions |
| Temperature Range | -40F to 185F (-40C to 85C) |
| Security | AES encryption listed for the REIGN system |
| Package Contents | XRE-100 relay extender only unless the listing specifically includes transmitter or kit accessories |
Also Known As / Related Part Numbers
- REIGN-XRE-100
- XRE-100
- REIGN wireless relay extender
- Transmitter Solutions REIGN relay extender
- REIGN TXRE-100 kit - related kit version
- REIGN TX-100 - related transmitter
Related Parts and Service Checks
- Confirm whether the job needs the extender only or the complete XRE-100 kit with TX-100 transmitter
- Check available 12/24V AC/DC power and current capacity before wiring
- Verify the controlled device has a compatible dry-contact relay input
- Plan antenna location high and away from large metal enclosures when possible
- Confirm control wiring does not bypass photo eyes, safety edges, fire access, or stop circuits
- Test relay operation from a safe position with a clear view of the gate or door
Technician Note
Long-range radio products are only as good as the site layout. Before blaming the extender, check antenna placement, power input, obstructions, enclosure material, electrical noise, and whether the correct REIGN transmitter or paired extender is being used.
Before Ordering Checklist
- Confirm the needed item is REIGN-XRE-100, not the TX-100 transmitter only
- Confirm whether a kit package is required for a new installation
- Confirm the relay input on the gate, door, or panel accepts dry-contact control
- Confirm the site has suitable power at the extender location
- Confirm expected range with line of sight, obstructions, and antenna location in mind
- Confirm the installation will keep all required safety and emergency access systems in service
Installation and Service Notes
Relay wiring and low-voltage integration should be handled by a qualified gate, door, alarm, or access-control technician when the control circuit is not clearly identified. Do not connect the XRE-100 to high-voltage motor power. Use it only with compatible control circuits and maintain all required safety devices.
Professional Advisory
For South Florida gate sites, metal fencing, masonry columns, dense landscaping, and nearby electrical equipment can affect radio range. Confirm antenna placement and expected range before mounting the extender permanently.
Product Questions & Answers
Does the REIGN XRE-100 include a TX-100 transmitter?
This listing should be treated as the XRE-100 wireless relay extender only unless the order specifically states that a TX-100 transmitter is included. The kit version is a different package and should be checked before ordering.
What power does the XRE-100 require?
The XRE-100 is commonly listed for 12 to 24 volt AC/DC power. Confirm the available power source and current capacity before wiring it to a gate operator, door control, or access-control panel.
Can the XRE-100 work with any gate operator?
It may be used with operators that accept a compatible dry-contact relay input, but the installer must verify the operator input, relay wiring, voltage, and safety circuits before connecting it.
How far can the XRE-100 communicate?
The published range is up to 40 miles in ideal line-of-sight conditions and about 1/2 mile through severe obstructions. Real-world range depends on antenna placement, terrain, buildings, metal enclosures, and radio interference.
Can this replace trenching control wire to a remote gate?
It may be used to avoid trenching in select relay-control applications, but the site still needs proper power, antenna placement, and a safe control interface. It should not be used to bypass required safety devices.
What should I check if the relay extender has poor range?
Check antenna height, metal enclosure placement, power input, line of sight, obstructions, nearby electrical noise, pairing status, and whether another extender or different antenna placement is needed.
Can I use the XRE-100 for high-voltage motor power?
No. The XRE-100 is used for relay signaling and control input applications. It is not a power-feed replacement for a gate motor, commercial door motor, or high-voltage circuit.
