Security Brands SP1012VDC-B 10 Watt 12 Volt Solar Panel with Bracket
The Security Brands SP1012VDC-B is a 10 watt solar panel assembly intended for compatible 12 volt battery applications. It is often used around gate and access-control installations where a small panel is needed to support a battery-backed device, low-power control system, or solar-assisted setup. The included bracket and hardware help simplify mounting, but the panel still needs proper orientation, sun exposure, wiring, and charge-control planning to work correctly. A solar panel that is too small for the load, mounted in shade, or paired with the wrong battery/control setup can leave a system undercharged. This item should be matched to the actual daily power draw and the rest of the charging equipment, not selected by wattage alone.
Compatible With
- Compatible 12 volt battery systems where a 10 watt panel is properly sized
- Security Brands / AAS access-control solar-assisted applications using supported 12 V battery charging equipment
- Gate and access-control installations that require a small 12 V solar panel accessory
- Sites with proper sun exposure and approved charge control
- May be used with other compatible 12 V low-power systems when voltage, current, and mounting requirements are confirmed
- Not a complete solar kit by itself; battery and charge controller requirements must be verified
Features and Specifications
| Manufacturer | Security Brands / American Access Systems |
|---|
| Product Type | Solar panel with mounting bracket |
|---|
| Part Number | SP1012VDC-B |
|---|
| Application | 12 volt battery support / solar charging accessory |
|---|
| Panel Rating | 10 watt |
|---|
| Battery Voltage | Suitable for 12 volt battery applications |
|---|
| Frame | Aluminum frame |
|---|
| Included Components | Solar panel, mounting bracket, and mounting hardware |
|---|
| Notes | Confirm charge controller and load requirements |
|---|
| Warranty | Two-year limited warranty listed by manufacturer |
|---|
Also Known As / Related Part Numbers
- SP1012VDC-B
- SP1012VDCB
- Security Brands 10 Watt Solar Panel
- AAS SP1012VDC-B
- American Access SP1012VDC-B
- 10 watt 12 volt solar panel
- 12 VDC solar panel with bracket
- Power management accessory
Technician Note
Power-management and timer parts should be matched by voltage, load requirements, battery type, and enclosure location. Do not guess on voltage or wire a high-voltage timer into a low-voltage circuit.
Before Ordering
- Confirm the manufacturer part number and any old/new part number references.
- Match the product family and application, not just the brand name.
- Check voltage, frequency, activation method, receiver family, or battery type as applicable.
- Review the existing wiring, mounting location, and enclosure before replacing the part.
- For fire access or line-voltage work, confirm local code and use a qualified professional when required.
Professional Advisory
Access-control and power-management parts should be installed in accordance with the gate operator, access controller, local code, and site safety requirements. For high-voltage wiring, fire department access, or unsafe gate movement, use a qualified gate technician or licensed professional where required.
Product Questions and Answers
Is the SP1012VDC-B a complete solar kit?
No. It is a 10 watt solar panel with bracket and hardware. The battery, charge controller, and wiring requirements must be matched to the system.
What voltage system is this panel intended for?
It is listed for suitable 12 volt battery applications.
Can this panel power a gate operator by itself?
No. It helps charge a compatible battery system. The actual gate or access-control load must be calculated.
What should be checked before ordering?
Check battery voltage, charge controller requirements, sunlight exposure, mounting location, wire distance, and the daily power load.
Does the mounting bracket come with it?
Yes. The manufacturer lists a mounting bracket and mounting hardware with this panel.
