AES SA-PBK-US, Standalone Keypad with 125k Prox Reader, Powder Coat Pedestal
The AES SA-PBPK-US is a standalone pedestal-mount keypad with 125k proximity reader for gate, door, and access control applications. It is commonly used where a local access point needs both PIN-code entry and proximity card or tag access without using a full cellular intercom panel.
This unit is part of the AES standalone keypad / proximity reader range. It can be used for pedestrian gates, vehicle gates, service entrances, controlled doors, access lanes, and other low-voltage access control locations where the system design calls for a pedestal-style keypad/prox unit.
The SA-PBPK-US should be ordered by exact AES part number and feature set. Do not confuse the keypad/prox combination version with the keypad-only SA-PBK-US or other AES standalone keypad styles.
Important Part Number Mismatch Warning
The part number provided was SA-PBK-US, but the product description mentions a 125k prox reader. Current listings commonly identify SA-PBK-US as the standalone pedestal keypad-only model, while SA-PBPK-US is commonly listed as the pedestal keypad/proximity reader combination.
Before publishing this product page, verify the physical product label, AES packaging, supplier SKU, product image, and whether the unit includes a built-in proximity reader. If the product is keypad-only, use SA-PBK-US content and remove prox-reader claims. If it includes both keypad and 125k prox reader, SA-PBPK-US is the more accurate part number.
What This Standalone Keypad and Prox Reader Does
The SA-PBPK-US provides local access control using keypad codes and compatible proximity credentials. In the correct installation, users can enter a PIN code or present a compatible prox card or tag to trigger a relay output for a gate operator, electric strike, magnetic lock, door controller, or other approved access control device.
This unit does not replace the gate operator, lock hardware, safety devices, power wiring, or complete access control design. Relay wiring, power, credential programming, access rules, and safety devices must be installed correctly for the system to operate safely.
Compatible With
Use the AES SA-PBPK-US only where the installation requires a standalone keypad/prox reader unit and the system design supports the required power, relay output, credential format, and mounting style. Compatibility depends on the connected gate operator, door hardware, lock controller, power supply, credential type, and wiring method.
- Standalone gate access applications requiring keypad and 125k prox credential access
- Pedestrian gate and service entrance applications where a local standalone keypad/prox reader is specified
- Automatic gate operator control circuits that accept a dry contact relay input from an approved access control device
- Door access applications using compatible relay wiring, electric strike, magnetic lock, or access control interface
- Installations requiring a pedestal-style black powder-coated keypad/prox unit
- Applications requiring multiple relay outputs where the AES standalone keypad/prox model supports that configuration
- Repairs or replacements where the original unit is marked, listed, or cross-referenced as SA-PBPK-US
Important Compatibility Warning
Do not assume SA-PBK-US and SA-PBPK-US are the same unit. SA-PBK-US is commonly associated with the standalone keypad-only model, while SA-PBPK-US is commonly associated with the keypad/prox combination model.
Also confirm credential compatibility before ordering. This unit is associated with 125k proximity credentials. It should not be assumed compatible with every HID, iCLASS, MIFARE, DESFire, Bluetooth, mobile credential, encrypted credential, or smart-card format unless AES documentation confirms support.
Similar AES Parts That Are Not Automatically Interchangeable
- AES SA-PBPK-US: Standalone pedestal keypad with proximity reader; this is the keypad/prox combination version.
- AES SA-PBK-US: Standalone pedestal keypad-only model; not the same as the keypad/prox reader version.
- AES SA-PBP-US: Standalone pedestal proximity reader version, where offered; not the same as keypad/prox unless AES confirms.
- AES SA-ABK-US: Architectural-style standalone keypad; different mounting style.
- AES SA-ABPK-US: Architectural-style keypad/prox version; not the same pedestal enclosure style.
- AES SA-IBK-US: Imperial-style standalone keypad; different housing style.
- AES SA-IBPK-US: Imperial-style keypad/prox version; not the same pedestal model.
- AES KeyCell / CellCOM master units: Cellular systems with master/auxiliary architecture; not the same as this standalone keypad/prox reader.
Not Intended For
- Use as a complete cellular intercom, telephone entry system, or app-controlled CellCOM / KeyCell master unit
- Replacement for an AES cellular motherboard, 4G module, SIM card, antenna, or speaker/callpoint assembly
- Installations that require keypad-only operation if the correct part is SA-PBK-US
- Installations that require a different housing style such as architectural, imperial, flush, or wall mount
- Credential systems requiring a reader technology other than the supported 125k prox format
- Direct control of unsafe or high-voltage circuits without the proper approved interface
- Bypassing gate safety devices, monitored photo eyes, safety edges, access control protections, or required entrapment protection
Features & Specifications
| Feature / Specification | Details |
| Manufacturer | AES / AES Global |
| Recommended Correct Part Number | SA-PBPK-US |
| Conflicting Part Number Provided | SA-PBK-US is commonly associated with keypad-only versions; verify before publishing prox-reader claims |
| Product Type | Standalone keypad and proximity reader |
| Mounting Style | Pedestal-mount style / powder-coated black enclosure, where supplied by AES specification |
| Keypad Function | PIN-code access control |
| Proximity Reader | 125k prox reader, where supplied as SA-PBPK-US |
| Power Supply | 24 VDC power supply included where specified by AES listing; verify package contents before ordering |
| Current Draw | 34mA standby / 110mA latched relay, where specified by listing |
| Weather Rating | IP55, where specified by AES listing |
| Relay Type | N/C and N/O, latching and momentary relay operation where supported |
| Relays | 3 relays, where specified by AES listing |
| Code / Card Capacity | 1200 keypad/card codes across 3 relays, where supported |
| Wiegand Output | 26-bit and 34-bit Wiegand output, where supported |
| Egress Input | Yes, where specified by AES listing |
| Included Components | Standalone keypad/prox reader unit and power supply where specified; verify package contents |
| Not Included | Gate operator, electric lock, SIM service, cellular intercom, antenna, pedestal post, credentials, wiring, conduit, and installation hardware unless specifically stated |
Also Known As / Related Part Numbers
- AES SA-PBPK-US
- SA-PBPK-US
- AES Global SA-PBPK-US
- Nice AES SA-PBPK-US
- AES Pedestal Mount Card Reader and Keypad
- AES Pedestal Mount Keypad and Proximity Card Reader
- AES Standalone Pedestal Mount Keypad and Proximity Reader
- AES Standalone Keypad with 125k Prox Reader
- AES Powder Coat Pedestal Keypad / Prox Reader
- AES SA-PBPK Stand-Alone Keypad with Proximity Reader
- AES-SA-PBPK-US
- SAPBPKUS, possible search variation only; verify exact part number as SA-PBPK-US
- HYS-SA-PBPK-US, related distributor-style SKU format only; verify seller SKU before ordering
- SA-PBK-US, related keypad-only pedestal model; not the same as keypad/prox version
- SA-PBP-US, related prox-reader-only pedestal model where offered; verify before cross-referencing
Related Parts and Accessories
- AES SA-PBK-US, standalone pedestal keypad-only model; not the same as keypad/prox
- AES SA-PBPK-US, standalone pedestal keypad/prox model; recommended corrected part for this description
- AES SA-ABK-US, architectural-style standalone keypad; different mounting style
- AES SA-ABPK-US, architectural-style standalone keypad/prox; different mounting style
- AES SA-IBK-US, imperial-style standalone keypad; different mounting style
- AES SA-IBPK-US, imperial-style standalone keypad/prox; different mounting style
- AES 125k prox cards or tags, where compatible with the installed reader
- Power supply, wiring, conduit, pedestal post, and mounting hardware where required by the installation
Technician Note
The most important item to verify is the suffix. PBK is commonly associated with keypad-only, while PBPK is commonly associated with keypad/prox. If the physical unit includes a 125k prox reader, confirm whether the actual part number should be SA-PBPK-US before uploading the product page.
If a standalone keypad/prox unit is not operating, do not assume the unit is bad. Check 24 VDC power, relay programming, keypad code setup, card or fob format, Wiegand wiring if used, egress input wiring, relay output wiring, weather damage, and any water intrusion before replacing hardware.
Before Ordering, Confirm
- The correct part number is SA-PBPK-US for the keypad/prox reader version.
- The product is not actually SA-PBK-US keypad-only.
- The installation requires a standalone unit, not a CellCOM / KeyCell master or auxiliary panel.
- The installation requires pedestal-style / powder-coated black enclosure style.
- The site uses compatible 125k proximity cards or tags.
- The connected gate operator, door strike, magnetic lock, or access controller can accept the relay output.
- The required relay mode is momentary or latching and matches the access control design.
- The power supply, wiring, and conduit path meet AES and site requirements.
- The package contents are confirmed, especially whether the power supply, credentials, pedestal post, wiring, or mounting hardware are included.
Installation and Service Notes
- Disconnect power before wiring or servicing the keypad/prox unit.
- Follow AES wiring instructions for power, relays, Wiegand output, and egress input.
- Document wire colors, terminal positions, relay settings, and programming before replacing an existing unit.
- Do not connect the relay output directly into unsafe or high-voltage circuits without the proper approved interface.
- Confirm the keypad codes, prox credentials, relay outputs, egress input, and any Wiegand output after installation.
- Protect the enclosure and wiring from water intrusion, corrosion, loose conduit fittings, and vehicle-lane damage.
- Do not bypass gate safety devices, monitored photo eyes, safety edges, emergency access equipment, or required entrapment protection during testing.
Professional Advisory
A qualified gate, access control, or low-voltage technician should install or service this unit when it is connected to a gate operator, magnetic lock, electric strike, elevator control, fire access system, door controller, or monitored safety circuit. Do not bypass required safety devices or access control protections to make the system operate.
Product Questions & Answers
Is AES SA-PBK-US the same as SA-PBPK-US?
No. SA-PBK-US is commonly listed as the standalone pedestal keypad-only model, while SA-PBPK-US is commonly listed as the standalone pedestal keypad/proximity reader combination. Verify the exact part number before ordering.
What is AES SA-PBPK-US used for?
AES SA-PBPK-US is used as a standalone pedestal keypad and 125k prox reader for local gate, door, pedestrian entrance, and access control applications.
Is this a CellCOM or KeyCell cellular intercom?
No. This is a standalone keypad/prox reader unit. It should not be confused with AES CellCOM, KeyCell, Prime, or modular cellular intercom systems.
Does the SA-PBPK-US include a power supply?
Current listings commonly state that a 24 VDC power supply is included, but package contents should still be verified before ordering or publishing the product page.
How many codes can the AES SA-PBPK-US support?
Listings commonly reference 1200 keypad/card codes across 3 relays for the standalone keypad/prox range. Confirm the current AES documentation before relying on the capacity for a specific installation.
Will the prox reader work with every card or fob?
No. This unit is associated with 125k proximity credentials. Confirm the card or tag format is compatible with the AES reader before ordering or programming credentials.
What should I check before ordering this AES standalone keypad/prox unit?
Confirm the exact part number, keypad/prox requirement, pedestal mounting style, 125k credential format, power supply, relay requirements, Wiegand needs, egress input, package contents, and whether the item is SA-PBPK-US rather than SA-PBK-US.
