BEA 10LZRS600 LZR-S600 Laser Scanner for Automation and Security
The BEA 10LZRS600 LZR-S600 is a high-precision laser scanner designed for applications that need configurable object detection over a larger area. It uses Time-of-Flight measurement and multiple laser curtains to form a three-dimensional detection zone, which can be useful around large industrial doors, automation zones, perimeter areas, vehicle approaches, or security-controlled openings. In the field, this type of sensor is chosen when a simple motion detector, photoeye, or loop detector does not provide the desired coverage pattern. Correct application review is important because the LZR-S600 must be mounted, aimed, programmed, powered, and wired to equipment that can use its outputs. It should be selected as part of an overall system design, not as a blind replacement for a required safety device.
BEA’s LZR®-S600 is a LASER-based Time-of-Flight sensor. This
high precision technology ensures accurate detection. The
product configuration provides four LASER-based curtains
offering a three dimensional presence detection zone.
BEA’s LZR®-S600 represents the largest detection field offered
in our LASER Time-of-Flight product portfolio. This sensor is
ideal for perimeter security protection, industrial automation
and large industrial door / gate applications that require a wide
field of detection.
The LZR®-S600 is housed in an IP65 rated enclosure and can
be installed in outdoor, industrial and other harsh environments.
Three visible LED spots provide accurate reference points when
adjusting the tilt angle. Parameter adjustments can be made
with a BEA universal remote control.
BEA’s Largest Detection Field
Maximum detection range of 82 × 82 ft
Safe And Reliable
External entrapment protection device capable of monitoring with
interfaces building management systems
Reduce False Detections
High immunity to environmental interferences
Eliminates False Detections
Has the ability to ignore dynamic ground conditions and extreme
weather
Technical Specifications
| Specification | Manufacturer Specification |
|---|
| Technology | LASER scanner, Time-of-Flight measurement |
| Detection Mode | Motion and presence |
| Detection Range | Default: 33' × 33' @ 2% remission factor; maximum: 82 ft × 82 ft |
| Angular Resolution | 0.3516° |
| Minimum Detected Object Size (Typical) | 0.8 in @ 10 ft
1.4 in @ 16 ft
2.8 in @ 33 ft
6.9 in @ 82 ft |
| IR Laser Emission | Wavelength: 905 nm; output power: 0.10 mW (CLASS 1) |
| Red Visible Laser Emission | Wavelength: 635 nm; output power: 0.95 mW (CLASS 2) |
| Supply Voltage | 10 – 35 VDC @ sensor side |
| Power Consumption | < 5 W |
| Peak Current at Power-On | 1.8 A (max. 80 ms @ 35 V) |
| Cable Length | 33' |
| Response Time | Typical: 20 ms; maximum: 80 ms + output activation delay |
| Output | 2 electronic relays (galvanic-isolated – polarity-free) |
| Maximum Switching Voltage | 35 VDC / 24 VAC |
| Maximum Switching Current | 80 mA (resistive) |
| Switching Time | tON = 5 ms; tOFF = 5 ms |
| Output Resistance | Typical: 30 O |
| Voltage Drop on Output | < 0.7 V @ 20 mA |
| Leakage Current | < 10 µA |
| Input | 2 optocouplers (galvanic-isolated – polarity-free) |
| Maximum Input Contact Voltage | 30 VDC (over-voltage protected) |
| Input Voltage Threshold | Logic Active High: > 8 VDC
Logic Active Low: < 3 VDC |
| Monitoring Input Response Time | < 5 ms |
| LED Signal | 1 blue LED: power-on status
1 orange LED: error status
2 bi-colored LEDs: detection/output status (green = no detection, red = detection) |
| Dimensions | 3 5/8" × 2 3/4" × 5" (W × H × D); mounting bracket: + 1/2" |
| Material | PC/ASA |
| Color | Black |
| Mounting Angles on Bracket | -45°, 0°, 45° |
| Rotation Angles on Bracket | -5° – 5° (lockable) |
| Tilt Angles on Bracket | -3° – 3° |
| Protection Degree | NEMA 4 / IP65 |
| Temperature Range - Powered | -22 – 140 °F (-30 – 60 °C) |
| Temperature Range - Unpowered | 14 – 140 °F (-10 – 60 °C) |
| Humidity | 0 – 95% non-condensing |
| Vibrations | < 2G |
| Pollution on Front Screen | Maximum 30%, homogeneous |
| Norm Conformity | 2006/95/EC: LVD; 2002/95/EC: RoHS; 2004/108/EC: EMC; IEC 60529:2001; IEC 60825-1:2007; IEC 60950-1:2005; IEC 61000-6-2:2005; IEC 61000-6-3:2006 |
Compatible With
- BEA LZR-S600 / 10LZRS600 laser scanner applications
- Large industrial door detection zones when supported by the control system
- Barrier and gate-area object detection when the installation design supports this sensor type
- Building automation and perimeter detection applications
- Security and access-control detection zones requiring configurable laser curtains
- Applications requiring larger field coverage than basic beam sensors
- Verify controller input requirements, safety-device requirements, and mounting geometry before ordering
Features and Specifications
| Manufacturer | BEA Sensors |
|---|
| Part Number | 10LZRS600 |
|---|
| Product Family | LZR-S600 |
|---|
| Product Type | Laser scanner |
|---|
| Technology | LASER Time-of-Flight measurement |
|---|
| Detection Type | Configurable object / presence detection |
|---|
| Detection Field | Four laser-based curtains for three-dimensional detection zone |
|---|
| Common Applications | Industrial doors, barriers, gates, perimeter security, building automation |
|---|
| Housing / Color Reference | LZR-GOLD-BLACK BLK-02 S600 |
|---|
| Notes | Application must be verified by controller inputs and safety requirements |
|---|
Also Known As / Related Part Numbers
- 10LZRS600
- 10LZR-S600
- LZR-S600
- LZR S600
- LZR-GOLD-BLACK BLK-02 S600
- S600 laser scanner
- BEA S600
- Related raw data scanners: 10LZRU920, 10LZRU921
- Related industrial sensor family: 10LZRWIDESCAN
Technician Note
Use this sensor only where the control panel or automation system is designed to accept and interpret the scanner output. It should not be sold as a universal monitored safety device.
Before Ordering Checklist
- Confirm the application requires an LZR-S600, not WIDESCAN, U920, U921, or a photoeye
- Review detection field size and mounting geometry
- Confirm controller input type and power requirements
- Check environmental exposure and mounting hardware
- Verify whether additional monitored photoeyes, edges, or loops are still required
Important Ordering Warnings
- Not a universal replacement for gate photoeyes or loop detectors
- Not interchangeable with U920/U921 raw-data scanners
- Programming and field setup are required
Professional Advisory
Laser scanners and industrial door/gate detection devices should be installed and configured by trained personnel. Do not use a scanner to bypass required monitored safety devices.
Product Questions and Answers
What is the BEA 10LZRS600 used for?
It is a laser Time-of-Flight scanner used for large-area object detection in building automation, industrial door, barrier, gate, perimeter, or security-style applications where the control system can use its outputs.
Is the S600 a direct replacement for a loop detector?
Not automatically. It may be used as an alternative detection technology in certain applications, but loop detector, safety, and access-control requirements must be reviewed for the specific site.
What is the difference between S600 and U920/U921?
S600 is commonly used as a configurable three-dimensional presence/object detection scanner. U920 and U921 are raw-data laser measurement devices intended for systems that process measurement data.
Can this be used as a monitored gate photoeye?
No. Do not assume this scanner satisfies monitored entrapment-protection requirements for a gate operator. Verify the operator requirements and applicable safety devices.
What should be checked before ordering?
Check the required detection field, mounting location, wiring, power, output type, environmental exposure, and whether the access or automation controller is designed to use this type of laser scanner.
