BEA 10MATRIXHARN, Harness, Matrix
The BEA 10MATRIXHARN is the wire harness used to connect BEA Matrix family loop detectors to compatible control equipment. The harness has a female 11-pin socket at the detector end and wire leads for connecting power, loop inputs, and relay outputs according to the Matrix wiring diagram. It is useful when installing a Matrix detector into a new cabinet, replacing a cut or corroded harness, or cleaning up a detector installation that needs a removable plug-in connection for future service. Since Matrix detectors are used in vehicle detection applications, this harness is part of the control circuit that helps the operator recognize a vehicle at an entry, exit, presence, or safety loop.
A harness should be replaced when the socket is loose, heat damaged, corroded, cracked, missing pins, or has been altered in a way that makes troubleshooting unreliable. Harness replacement does not change the detector voltage or loop count by itself; the connected Matrix detector and control panel must still be matched correctly.
Compatible With
Compatibility should be verified by the original BEA part number, product family, voltage, loop count, cable length, and the equipment wiring diagram. Commonly associated applications include:
- BEA Matrix family loop detector installations using an 11-pin plug-in connection
- 10MATRIXD110 dual-loop 110-120 VAC Matrix detector applications
- 10MATRIXD1224 dual-loop 12-24 VAC/VDC Matrix detector applications
- 10MATRIXIIS110 single-loop 110-120 VAC Matrix II detector applications
- 10MATRIXIIS1224 single-loop 12-24 VAC/VDC Matrix II detector applications
- Compatible automatic door, gate, barrier, parking, and industrial access control cabinets using BEA Matrix detector wiring
- Service replacement for damaged or missing Matrix detector harness connections
Features & Specifications
| Manufacturer | BEA Sensors |
|---|
| Product Type | Wire harness / detector socket harness |
|---|
| Part Number | 10MATRIXHARN |
|---|
| Application | Connection harness for BEA Matrix loop detectors |
|---|
| Compatible Family | BEA Matrix loop detector family |
|---|
| Detector Connection | Female 11-pin socket |
|---|
| Wire | 20 gauge stranded wire, based on BEA harness documentation |
|---|
| Length | 6 ft / approximately 1.82 m |
|---|
| Use | Power, loop input, and relay output wiring interface for compatible Matrix detectors |
|---|
| Notes | Follow the detector wiring diagram and control-panel requirements |
|---|
Also Known As / Related Part Numbers
- 10MATRIXHARN
- Matrix Wire Harness
- BEA Matrix Harness
- 11-pin Matrix harness
- Matrix detector harness
- 70.0262 - related 11-pin DIN rail socket
- 86CP11 - 11-pin connector reference
- 10MATRIXD110 - compatible Matrix detector
- 10MATRIXD1224 - compatible Matrix detector
- 10MATRIXIIS110 - compatible Matrix detector
- 10MATRIXIIS1224 - compatible Matrix detector
Technician Note
Label each existing wire before removing an old harness. The wire colors or field splices in an older cabinet may not match the current diagram. After installing the harness, verify detector power, loop input, relay output, and operator response before putting the door, gate, or barrier back into service.
Before Ordering
- Confirm the detector is from the BEA Matrix family and uses the 11-pin harness connection.
- Identify whether the connected Matrix detector is single-loop or dual-loop.
- Confirm detector power voltage before wiring the harness to the control panel.
- Compare all wire functions to the BEA Matrix wiring guide and operator wiring diagram.
- Inspect the loop and relay wiring for previous field modifications.
Important Ordering Warnings
- This harness does not convert detector voltage or make incompatible detectors interchangeable.
- Incorrect wiring can damage the detector or control equipment.
- Do not bypass loop or safety functions to make a detector appear operational.
Professional Advisory
Harness wiring can include power and control circuits for moving door, gate, or barrier equipment. A trained technician should handle installation where the wiring layout is unclear or where high voltage is present.
Product Questions & Answers
What does the 10MATRIXHARN connect to?
It connects directly to the 11-pin plug-in base on compatible BEA Matrix loop detectors and provides wire leads for the control equipment.
Is this harness only for one Matrix model?
It is associated with the Matrix loop detector family, including common single-loop and dual-loop Matrix versions. The detector model and wiring still need to be verified.
How long is the Matrix harness?
BEA documentation describes the Matrix wire harness as a 6 ft harness with a female 11-pin socket.
Will this harness fix a loop detection problem?
Only if the problem is caused by a damaged harness or socket. Loop wire faults, detector failure, wrong voltage, or control-board input issues can create similar symptoms.
Can this be used with non-BEA loop detectors?
It should be used for compatible BEA Matrix detector wiring unless the other detector, pinout, and control diagram are confirmed to match.
