BEA 10TD900TR, 900 MHz Touchless Wireless Retrofit Transmitter
The BEA 10TD900TR is the retrofit-style transmitter in the BEA 900 MHz wireless family. It is built for touch-to-touchless conversion work, especially on automatic pedestrian door openings where an older hardwired touch plate is being replaced with a touchless plate and the wall does not have enough conductors for a conventional four-wire sensor hookup.
In a typical retrofit, the transmitter allows the existing in-wall activation pair to remain in use while the wireless receiver provides the activation signal back to the door control. This is useful on storefronts, medical facilities, office buildings, retail entrances, and other retrofit jobs where running new wire through finished walls would add labor or disturb the opening.
Correct setup depends on the receiving device, power source, sensor output type, and relay configuration. The touchless plate and receiver should be configured for the intended momentary activation behavior, and the installation should be tested through the full door cycle after programming.
Compatible With
- BEA 900 MHz Wireless Family systems using a compatible BEA 900 MHz receiver
- BEA 10RD900 receiver module applications
- BEA BR2-900 / 10BR2-900 receiver logic applications when used as specified
- Touch-to-touchless push plate retrofit applications
- Automatic pedestrian door activation controls that accept a compatible BEA wireless receiver output
- Select low-energy swing door and automatic sliding door installations using BEA 900 MHz accessories
- Existing two-wire touch plate retrofit openings where a powered touchless plate is being added
Features & Specifications
| Manufacturer | BEA Sensors |
|---|
| Product Type | 900 MHz touchless retrofit transmitter |
|---|
| Part Number | 10TD900TR |
|---|
| Application | Touch-to-touchless push plate retrofit for automatic pedestrian doors |
|---|
| Compatible Operator Type | Automatic pedestrian door controls using compatible BEA 900 MHz receiving equipment |
|---|
| Frequency | 908-918 MHz radio control family |
|---|
| Radio Control Type | Digital |
|---|
| Input Voltage | 12-24 VAC/VDC |
|---|
| Power Consumption | Retrofit transmitter: 22 mA |
|---|
| Dimensions | Approx. 1.72 in W x 1.06 in D x 0.32 in H |
|---|
| Related Receiver | 10RD900 and compatible BEA 900 MHz receiver/logic modules |
|---|
| Notes | Used with proper receiver programming and pulse/toggle configuration |
|---|
Also Known As / Related Part Numbers
- 10TD900TR
- 900RT
- BEA 900 MHz retrofit transmitter
- BEA touchless wireless converter
- 10RD900
- 10BR2-900
- 10BR2900
- 10TD900PB
- 10PS12-24
- 10PSST242
Technician Note
Confirm the BEA 900 MHz family or sliding-door sensor family before ordering. Similar BEA part numbers can differ by button count, housing type, receiver function, voltage, monitoring support, or application. For automatic pedestrian doors, test the door after installation and keep all required safety devices active.
Before Ordering
- Match the manufacturer part number printed on the existing product or service documentation.
- Confirm the product family: BEA 900 MHz wireless, BEA Tech Kit, or BEA ULTIMO sliding door sensor.
- For transmitters, confirm the receiver is a compatible BEA 900 MHz receiver or receiver logic module.
- For sensor work, confirm door type, mounting height, wiring, monitoring input, and safety standard requirements.
- Do not substitute standard, industrial, universal, retrofit, or sensor products just because the housings look similar.
Professional Advisory
Automatic pedestrian door wiring, sensor monitoring, and safety testing should be handled by a qualified automatic door technician. Do not bypass presence sensors, monitored safety inputs, or required door safety functions to make a part operate.
Important Ordering Warnings
- Standard handheld, industrial handheld, universal, push plate, and retrofit transmitters are different BEA 900 MHz products and should not be mixed unless the receiver and application support them.
- 900 MHz frequency does not guarantee compatibility with non-BEA receivers or unrelated operator-brand radio systems.
- For ULTIMO applications, final detection-field setup and safety inspection are required after installation.
Product Q&A
What is the BEA 10TD900TR used for?
It is used to help convert an existing hardwired touch push plate installation to a touchless wireless activation setup without running a new full wire set through the wall.
Does this replace a handheld BEA remote?
No. It is a retrofit transmitter for touchless plate conversion work, not a handheld keyring transmitter.
What receiver does this transmitter work with?
It is intended for BEA 900 MHz wireless receiving equipment, including compatible 10RD900 and BR2-900 style applications when the system is configured correctly.
Why would the door stay activated after installation?
Common causes include a sensor wired to the wrong output, toggle mode instead of pulse mode, receiver programming issues, or movement in front of the touchless plate.
Should this be installed by a technician?
Yes. This part ties into automatic door activation wiring, so final setup and safety testing should be handled by a qualified automatic door technician.
