Beninca TO.GO2VA 433.92 MHz Remote Compatibility Details
The Beninca TO.GO2VA is a 2-channel transmitter remote control for compatible Beninca gate openers, garage door openers, barrier operators, and access-control receivers. It operates on 433.92 MHz and belongs to the Beninca TO.GO VA remote family.
This remote is commonly ordered as an additional transmitter, a replacement for a lost remote, or a replacement path for select older Beninca TO.GO rolling-code remotes where receiver compatibility is confirmed.
What This Remote Does
The TO.GO2VA sends a wireless command to a compatible Beninca receiver. Depending on how the receiver channels are programmed, the remote may operate a gate, garage door, barrier arm, or second compatible receiver function.
- 2-channel handheld Beninca transmitter
- Operates on 433.92 MHz
- Supports Advanced Rolling Code and rolling-code operation
- Commonly used for Beninca TO.GO VA receiver applications
- May be used for up to two compatible receiver functions when programmed correctly
Compatible With
- Select Beninca 433.92 MHz receivers that support TO.GO VA coding
- Beninca gate openers with compatible receiver hardware
- Beninca garage door and barrier receiver applications where TO.GO2VA is supported
- Select TO.GO2WV replacement applications when the receiver supports the newer transmitter
- Systems using ARC, HCS rolling code, or mixed-code setup where supported by the receiver
Important Compatibility Warning
A 433.92 MHz label alone does not guarantee compatibility. The receiver must support the correct Beninca TO.GO VA code format and programming method. Similar Beninca remotes can use different channels, frequency, housing style, coding family, or receiver requirements.
Similar Parts That Are Not Automatically Interchangeable
- Beninca TO.GO4VA - related 4-channel transmitter, not the same button count
- Older TO.GO2WV - may be replaced by TO.GO2VA only where receiver compatibility is confirmed
- Fixed-code Beninca remotes - not the same as TO.GO VA rolling-code operation
- Other 433.92 MHz brand remotes - not automatically compatible with Beninca receivers
- Universal remotes - must specifically support the exact Beninca code format
Features and Specifications
| Specification | Details |
|---|
| Brand | Beninca |
| Model | TO.GO2VA |
| Product Type | Transmitter remote control |
| Channels | 2 channels |
| Frequency | 433.92 MHz |
| Coding | Advanced Rolling Code and rolling-code support |
| ARC Reference | 128-bit Advanced Rolling Code commonly referenced for this family |
| Common Replacement Discussion | Select TO.GO2WV applications where receiver compatibility is confirmed |
| Application | Compatible Beninca gate, garage door, barrier, and receiver systems |
| Package Contents | Remote transmitter; verify battery, key ring, and instructions before final listing |
Also Known As / Related Part Numbers
- BEN-TO.GO2VA
- TO.GO2VA
- Beninca TO.GO2VA
- TO.GO VA 2-channel transmitter
- TO.GO2WV - older related remote where replacement compatibility is confirmed
- TO.GO4VA - related 4-channel remote
Related Parts and Service Checks
- Check the receiver model and frequency before ordering
- Confirm whether the receiver is set for ARC, HCS rolling code, or mixed-code operation
- Make sure a 2-channel remote is enough for the site
- Confirm whether the receiver is managed or locked by a property manager
- Replace the battery in the old remote before assuming the remote failed
- Check receiver memory capacity if adding multiple transmitters
Technician Note
If the old remote is gone, do not guess by frequency only. Open the receiver area, identify the receiver model, and confirm the supported Beninca coding mode. Shared gates may require authorized receiver programming.
Before Ordering Checklist
- Confirm the model needed is TO.GO2VA
- Confirm the system uses Beninca 433.92 MHz receiver technology
- Confirm the receiver supports TO.GO VA rolling-code operation
- Confirm the customer needs 2 channels, not 4 channels
- Confirm the remote is not being ordered for a fixed-code DIP switch receiver
- Confirm current package contents if battery or key ring is required
Installation and Service Notes
Programming depends on the receiver. Some systems learn the transmitter at the receiver; some managed systems require installer or property-manager access. Test the gate only from a safe location with a clear view of gate movement.
Professional Advisory
If no remotes work, the problem may be the receiver, antenna, control input, power, or gate operator wiring rather than the handheld transmitter. A qualified gate technician should inspect unclear failures before multiple remotes are replaced.
Product Questions & Answers
What is the Beninca TO.GO2VA used for?
The Beninca TO.GO2VA is a 2-channel 433.92 MHz remote transmitter used with compatible Beninca gate, garage door, barrier, and receiver systems.
What coding does the TO.GO2VA use?
The TO.GO2VA supports Beninca Advanced Rolling Code and rolling-code operation. It is commonly factory-set for ARC, but the receiver mode still needs to be verified.
Can TO.GO2VA replace TO.GO2WV?
It is commonly used as a replacement path for select older TO.GO2WV applications, but receiver compatibility and code mode must be confirmed before ordering.
Is this a DIP switch remote?
No. The TO.GO2VA is a rolling-code transmitter, not a fixed-code DIP switch remote. It should be used only with compatible Beninca receivers.
Can one TO.GO2VA control two entrances?
It has two channels, so it may control up to two compatible receiver functions when the receiver and programming support that setup.
Why will a 433.92 MHz receiver not always work with this remote?
Frequency alone is not enough. The receiver must also support the correct Beninca TO.GO VA coding mode, memory format, and programming method.
Who can program this remote on a shared gate?
On apartments, HOAs, and managed access systems, programming may be restricted to the property manager or gate technician with receiver access.
