GENIE 075260.0000.S, SWITCH ASSY,PULL
Hang Mount Pull Switch Assembly for commercial door operators. Pull Switch Assembly - Genie 075260.0000.S. Enclosure: NEMA 1. Mounting: Hang Mount. Contact configuration: Single-pole or double-pole wired to open input only - requires separate STOP button control station for full Open/Close/Stop operation. Hang mount configuration for suspended installation near commercial door.
Key Features
- Hang mount configuration for suspended installation near commercial door
- NEMA 1 rated enclosure for indoor dry-location use
- Wired to single-button or open input for open command activation
- Supports Open/Close/Stop operation when paired with required STOP button control station
- Cannot issue close command independently - requires separate STOP button control station for single/double-pole wiring
- Designed for use with Genie GCL series and HX/RHX jackshaft commercial door operators
Compatibility Guide
- Genie GCL series commercial door operators
- Genie GCL-H
- Genie GCL-GT
- Genie GCL-GH
- Genie GCL-J
- Genie GCL-MH
- Genie GCL-MJ
- Genie HX jackshaft operators
- Genie RHX jackshaft operators
| Feature | Specification |
|---|
| Model | Genie 075260.0000.S |
| Item Type | Pull Switch Assembly |
| Contact Configuration | Single-pole or double-pole wired to open input only - requires separate STOP button control station for full Open/Close/Stop operation |
| Enclosure Rating | NEMA 1 |
| Mounting | Hang Mount |
Frequently Asked Questions
Q: What functions can the 075260.0000.S pull switch assembly perform on its own?
A: This pull switch assembly is wired to a single-button or open input and can only initiate an open command - it cannot issue a close command on its own. A separate STOP button control station must be used alongside it for full Open/Close/Stop operation.
Q: What is the enclosure rating of this pull switch assembly and where can it be installed?
A: The 075260.0000.S carries a NEMA 1 enclosure rating, which is suitable for indoor use in clean, dry environments. It is not rated for outdoor, wet, or dusty locations.
Q: How is the 075260.0000.S mounted?
A: This pull switch uses a hang mount configuration, meaning it is suspended from a fixed point rather than being surface-mounted to a wall or panel. This allows it to hang in a convenient accessible location near the door.
Q: Is a separate STOP button required when using this pull switch assembly?
A: Yes. Because this pull switch can only trigger an open command, Genie requires that a separate STOP button control station be installed when using single-pole or double-pole wiring configurations. This ensures the operator can be stopped safely during operation.
Q: Which Genie commercial door operators is this pull switch assembly compatible with?
A: The pull switch assembly is compatible with Genie GCL series commercial door operators including GCL-H, GCL-GT, GCL-GH, GCL-J, GCL-MH, and GCL-MJ models, as well as HX and RHX jackshaft operators. Always verify wiring diagrams in the specific operator installation manual before installation.
