ANSI #35 44-pitch loop chain with master link for Genie commercial door operators. This is a genuine Genie OEM replacement part designated Genie 110877.0044.S, classified as Drive Chain. Material: Carbon steel, meets ANSI B29.1. Dimensions: Pitch: 0.375 in (9.525 mm); Roller dia: 0.200 in; Inner width: 0.188 in; 44 pitches; Assembled length: 16.5 in (419.1 mm) loop. Mounting: Endless loop installed over drive sprocket and driven sprocket; secured with master link.
A: The 0044 suffix specifies 44 pitches. At ANSI #35 pitch of 0.375 in, the chain loop has an assembled length of 44 x 0.375 in = 16.5 in (419.1 mm).
A: The 0xxx prefix (0044) indicates this chain uses a standard loop configuration with a master link (connecting link) that allows the chain to be opened and rejoined without special tools.
A: ANSI #35 chain has a rated tensile strength of approximately 2,320 lbf. Always verify that operator load requirements do not exceed this rating with appropriate safety factors applied.
A: Yes. This is a standard carbon steel chain without corrosion-resistant treatment. For humid, wet, or corrosive environments, consider the nickel-plated 2060 variant or apply appropriate lubrication and maintenance intervals.
A: The master link allows field replacement without a chain press. Remove the old chain, thread the new 44-pitch loop into the drive, and secure the master link clip in the direction of chain travel.
