The Genie 111859.0001.S is a genuine OEM replacement Hoist Shaft Kit designed for use with the Genie HXH commercial door operator (standard configuration), Genie HXH H-rail hoist-type operators (non-3HP, non-NEMA 4 variants). This Replacement hoist shaft kit for Genie HXH standard H-rail commercial door operators ensures proper drivetrain function and door protection when installed in the specified operator configuration. All components in this kit are manufactured to Genie specifications and are intended as direct replacements for worn or damaged parts in the field. Verify the exact operator model and configuration before ordering, as shaft kits are not interchangeable between different operator families or drive configurations.
A: No. Part number 111859.0001.S is the standard configuration hoist shaft kit. The NEMA 4 watertight variant is 111859.0002.S, which is designed for wet or outdoor environments where moisture ingress protection is required.
A: No. The 111860.0001.S is the hoist shaft kit for the HXH 3HP variant and includes a larger shaft assembly sized for the higher-torque drivetrain, which pairs with the 40:1 gear reducer (111544.0001.S). Using the wrong kit can result in mismatched shaft dimensions or incompatible gear ratios.
A: The hoist shaft kit includes the shaft assembly used in the H-rail hoist mechanism - the drum or cable-drive shaft that lifts and lowers the door. It also includes hardware for manual chain hoist operation per distributor documentation.
A: No. Intermediate shaft kits (such as 110988 or 110990 for hoist-type operators) are separate assemblies that sit between the motor output and the main drive shaft. The hoist shaft kit (111859.0001.S) is the main operator hoist shaft assembly and is not interchangeable with intermediate shaft kits.
A: The HXH is the heavy-duty H-rail hoist-type variant of the H-series commercial door operator line, designed for high-cycle applications and larger or heavier doors. It differs from the SXH in duty rating and drivetrain capacity. Hoist shaft kits are specific to the hoist configuration and are not compatible with jackshaft-type operators.
