Genie 37461U.S 32 In Emergency Release Cord Replacement Details
The Genie 37461U.S is a 32 in emergency release cord used on select Genie opener applications, commonly for standard 7 ft garage doors. It attaches to the carriage release lever and allows the opener to be disconnected from the door when manual operation is needed.
The cord is usually replaced when the original pull cord is cut, frayed, missing, too short, or no longer properly attached to the release lever. Cord length matters because Genie also uses longer release cords for 8 ft and taller door applications.
Compatible With
- select Genie 1028, 2028, 3020H, 3020H-B, 3120, 3022, 3024, 3042, 4022, 4024, 4042, SilentMax 1000, SilentMax 1200, IntelliG 1000, IntelliG 1200, ReliaG 650, and ReliaG 850 opener families when the release cord length is correct for the door height
- Standard 7 ft door applications that require the 32 in Genie release cord
- Replacement reference for 37461R.S in Genie product listings
- Not a replacement for 37461V.S 44 in or 37461W.S 116 in applications unless door height and handle position are confirmed
- Not a replacement for the carriage, bullet, handle, chain, belt, or rail assembly
Features & Specifications
| Feature | Specification |
|---|
| Manufacturer | Genie |
| Product Type | Emergency release cord assembly |
| Part Number | 37461U.S |
| Cord Length | 32 in |
| Door Height Application | Commonly used for 7 ft high doors |
| Application | Manual release cord for select Genie garage door opener carriages |
| Replacement Reference | Replaces 37461R.S in Genie listings |
| Included Components | Release cord only unless otherwise specified |
Also Known As / Related Part Numbers
- 37461U.S
- GE-37461U.S
- 37461US
- 37461R.S replacement reference
- Genie 32 in emergency release cord
- Related length variants: 37461U.S 32 in, 37461V.S 44 in, 37461W.S 116 in
Technician Note
After the cord is installed, the release handle should sit at a practical height and the lever should return fully. Test the carriage reconnection with the door closed before returning the opener to normal operation.
Before Ordering
- Confirm the door is a standard 7 ft application or requires a 32 in cord
- Verify the carriage release lever style matches this cord
- Check whether the release handle is included or will be reused
- Inspect the carriage and bullet for proper re-engagement
- Do not substitute this cord for taller-door applications that need a longer release cord
Professional Advisory
Pull the emergency release only when the doorway is clear and the door is in a safe, controlled position. If the door is heavy or drops when released, stop using the opener and have the spring system inspected by a qualified garage door technician.
Questions & Answers
What door height is Genie 37461U.S commonly used for?
The 37461U.S is a 32 in release cord commonly used on standard 7 ft high garage doors.
Does this replace 37461R.S?
Yes. Genie product listings identify 37461U.S as replacing 37461R.S for the 32 in emergency release cord.
Is the release handle included?
Handle inclusion can vary. This part should be treated as the release cord unless the listing specifically states that a handle is included.
Can I use this on an 8 ft door?
For many 8 ft door applications, Genie lists the 44 in 37461V.S cord. Confirm the correct length before ordering.
What should I test after replacing the cord?
Test that the lever moves freely, the carriage reconnects to the bullet, and the handle is reachable without interfering with the door or vehicle.
