Genie 37461W.S 116 In Emergency Release Cord Replacement Details
The Genie 37461W.S is a 116 in emergency release cord assembly for select Genie garage door opener applications using taller door heights. The cord attaches to the carriage release lever and allows the user to pull the opener into manual release when needed.
This longer release cord is commonly used where the standard 7 ft or 8 ft door cords do not place the handle at the proper reachable height. Correct cord length is important because the handle should be accessible without interfering with vehicles, the door path, or normal carriage engagement.
Compatible With
- Select Genie opener applications requiring the 116 in release cord for 9 ft through 14 ft door setups
- select Genie 1028, 2028, 3020H, 3020H-B, 3120, 3022, 3024, 3042, 4022, 4024, 4042, SilentMax 1000, SilentMax 1200, IntelliG 1000, IntelliG 1200, ReliaG 650, and ReliaG 850 opener families when the release cord length is correct for the door height
- Commonly listed alongside 37461U.S 32 in and 37461V.S 44 in release cord variants in Genie chain/belt drive parts categories
- Not a replacement for the 32 in cord used on standard 7 ft doors unless the door height and handle position require the longer cord
- Not a replacement for the carriage, release handle, chain/bullet, or belt/bullet assembly
Features & Specifications
| Feature | Specification |
|---|
| Manufacturer | Genie |
| Product Type | Emergency release cord assembly |
| Part Number | 37461W.S |
| Cord Length | 116 in |
| Door Height Application | Commonly used for 9 ft to 14 ft door applications |
| Application | Manual release cord for select Genie garage door opener carriages |
| Included Components | Release cord assembly only unless otherwise specified |
| Notes | Release handle may be separate depending on product configuration |
Also Known As / Related Part Numbers
- 37461W.S
- GE-37461W.S
- 37461WS
- 37461T.S 116 in release cord reference used by some suppliers
- Genie 116 in emergency release cord
- Related length variants: 37461U.S 32 in, 37461V.S 44 in, 37461W.S 116 in
Technician Note
After replacing the release cord, test that the release lever moves freely and that the carriage fully locks back onto the bullet. A cord that is routed incorrectly can bind, snag, or prevent proper reconnection.
Before Ordering
- Confirm the door height and required cord length
- Verify the carriage release lever style matches this cord assembly
- Check whether the release handle is included or must be reused
- Inspect the carriage and bullet for proper locking before returning the opener to service
- Do not route the cord where it can catch on a vehicle, ladder, or door section
Professional Advisory
Only use the emergency release with the door in a safe position and the doorway clear. If the door is heavy, drops, or cannot be lifted manually, do not rely on the opener or release cord to control the door. Have the door spring system serviced by a qualified garage door technician.
Questions & Answers
What door height is the Genie 37461W.S release cord for?
The 37461W.S is a 116 in release cord commonly used for taller 9 ft to 14 ft door applications.
Is this the same as the 32 in release cord?
No. The 37461U.S is the 32 in version commonly used on 7 ft doors. The 37461W.S is the longer 116 in version.
Does the release handle come with this cord?
Handle inclusion can vary by listing. Treat this as the cord assembly and confirm whether the handle is included before ordering.
Why does release cord length matter?
The release handle needs to be reachable and clear of obstructions. A cord that is too short or too long can create service and safety problems.
What should I test after installation?
Test that the release lever moves freely, the carriage reconnects to the bullet, and the door can be operated safely after the opener is re-engaged.
