Genie GE-113442.0001.S UL325 Gate Operator Buzzer
The Genie GE-113442.0001.S is a UL325 gate operator buzzer service part used with select Genie gate operator repairs. Genie service documentation lists 113442.0001.S as Buzzer, UL325, Gate Operator, making it the audible buzzer component where the installed operator parts diagram confirms this exact service part.
This item should be treated as the buzzer only unless the supplier package specifically states otherwise. It is not the logic board, motor drive PCB, reset button, power supply, control box enclosure, monitored photo eye, safety edge, receiver, keypad, strobe, siren assembly, or complete operator control assembly. Match this part by exact service number, operator model, buzzer location, connector style, wiring layout, and package contents before ordering.
Primary Use
- Replacement UL325 gate operator buzzer for select Genie gate operator service repairs
- Used where the service parts diagram lists 113442.0001.S as the UL325 gate operator buzzer
- Provides the audible warning/alarm function where the compatible operator control system activates the buzzer
- Service replacement when the original buzzer is damaged, missing, corroded, water damaged, disconnected, or no longer operating correctly
- Used as an audible component only; it does not replace monitored entrapment-protection devices or operator control logic
Compatible With
Use this buzzer only where the installed Genie operator documentation confirms 113442.0001.S as the correct service part. Do not assume it fits every Genie gate operator or every audible alarm circuit.
- Select Genie GLA24V linear actuator swing gate operator service repairs where the parts diagram lists 113442.0001.S
- Select Genie GRSW24V residential swing gate operator service repairs where the parts diagram lists 113442.0001.S
- Select Genie GRSL24V residential slide gate operator service repairs where the parts diagram or service documentation confirms the same buzzer part
- Repairs where the original buzzer is marked, ordered, or cross-referenced as GE-113442.0001.S or 113442.0001.S
- Applications where the buzzer connector, wiring route, logic board output, enclosure location, and parts diagram match the replacement component
Features and Specifications
| Specification | Details |
| Brand | Genie |
| Part Number | GE-113442.0001.S / 113442.0001.S |
| Service Description | Buzzer, UL325, Gate Operator |
| Product Type | Audible buzzer / UL325 alarm buzzer service component |
| Used With | Select Genie gate operator service repairs where 113442.0001.S is listed |
| Known Genie Model Families | Select GLA24V, GRSW24V, and GRSL24V service parts diagrams where confirmed |
| Primary Function | Audible buzzer output for supported gate operator alarm or warning functions |
| Safety Device Status | Not a monitored photo eye, safety edge, loop detector, or entrapment-protection device |
| Control Board Included | Do not assume included; logic board and motor drive board are separate service parts unless specifically listed |
| Reset Button Included | Do not assume included; reset button is a separate service part unless specifically listed |
| Connector / Wiring | Verify connector style, wire condition, and buzzer output wiring against the installed operator before ordering |
| Setup Required | No programming for the buzzer itself; alarm reset, safety input status, and operator fault checks may be required after service |
| Package Contents | Confirm before ordering; treat as the buzzer only unless wiring, connector, bracket, screws, gasket, harness, or instructions are specifically listed |
Important Comparison With Similar Genie Control and Warning Parts
Genie control and warning parts can be easy to confuse because the buzzer, reset button, logic board, and monitored safety devices may all be involved in an alarm condition. Confirm the failed component before ordering.
- GE-113442.0001.S / 113442.0001.S: UL325 gate operator buzzer service part for select Genie gate operator repairs.
- 113440.0001.S: Logic board assembly. This board may control buzzer behavior, but it is not the buzzer itself.
- 113436.0001.S: Linear actuator reset button. This is a reset switch component and is not the buzzer.
- 113429.0001.S: 24V motor drive PCB assembly. This is an electronic motor drive board and not the audible buzzer.
- 113443.0001.S: 24V 350W power supply. This is a power component and does not replace the buzzer.
- 113431.0001.S: Control box enclosure. This is the housing and is not the audible component.
- Monitored photo eyes and safety edges: These are entrapment-protection devices and are not replaced by the buzzer.
- External siren or strobe accessories: Not the same unless the supplier package specifically identifies a combined audible/visual device.
Also Known As / Related Part Numbers
- GE-113442.0001.S
- 113442.0001.S
- GE1134420001S
- 1134420001S
- Genie GE-113442.0001.S
- Genie 113442.0001.S
- Genie UL325 buzzer
- Genie gate operator buzzer
- Genie gate opener alarm buzzer
- Buzzer, UL325, Gate Operator
- UL325 gate operator alarm buzzer
- Audible buzzer for Genie gate operator
- Gate operator warning buzzer service part
- 113440.0001.S - related logic board assembly, not the same part
- 113436.0001.S - related reset button, not the same part
- 113429.0001.S - related 24V motor drive PCB assembly, not the same part
- 113443.0001.S - related 24V power supply, not the same part
- 113431.0001.S - related control box enclosure, not the same part
Technician Notes
- Confirm the buzzer is actually faulty before ordering. A sounding buzzer often means the operator is reporting an alarm or safety condition, not that the buzzer itself is bad.
- If the buzzer does not sound when expected, check the connector, wiring, logic board output, corrosion, damaged leads, and water intrusion before replacing only the buzzer.
- Do not unplug or disable the buzzer to silence an active alarm condition. The cause of the alarm should be diagnosed and corrected.
- Check monitored photo eyes, monitored safety edges, reset button function, entrapment inputs, operator fault/status display, and accessory wiring when the buzzer is active.
- Inspect the control enclosure for moisture, insects, rodent damage, loose connectors, cracked plastic, corrosion, damaged grommets, and failed seals.
- Do not confuse the buzzer with the reset button. The reset button may be used to clear or reset supported alarm conditions, while the buzzer is the audible warning component.
- If the buzzer was damaged by water, insects, impact, or lightning, inspect the logic board, power supply, motor drive board, batteries, and wiring before returning the gate to service.
- After replacement, verify buzzer operation only through the proper operator test or fault procedure. Do not create unsafe gate movement or bypass safety devices to test the part.
Before Ordering Checklist
- Confirm the exact part number is GE-113442.0001.S or 113442.0001.S.
- Confirm the installed Genie operator model and service parts diagram list 113442.0001.S.
- Confirm you need the UL325 buzzer, not the logic board, reset button, power supply, control enclosure, motor drive board, or monitored safety device.
- Inspect the existing buzzer, connector, wiring, mounting location, enclosure seal, and signs of water or insect damage.
- Check whether the buzzer is sounding because of an active alarm, monitored safety fault, reset condition, or operator fault code.
- Confirm the reset button, monitored photo eyes, safety edges, accessory inputs, fuses, batteries, power supply, and logic board status before replacing only the buzzer.
- Confirm whether wiring, connector, bracket, screws, gasket, harness, mounting hardware, or instructions are included.
- Confirm the original issue was not caused by disabled safety devices, damaged sensor wiring, water intrusion, rodent damage, lightning damage, or unknown prior modifications.
Professional Advisory
The UL325 buzzer is part of the gate operator warning/alarm system and should not be removed, bypassed, unplugged, or disabled to silence a fault. If the buzzer is active, the operator may be reporting a safety, entrapment, reset, or control condition that needs proper diagnosis. Repairs involving monitored photo eyes, safety edges, reset circuits, fire inputs, control boards, power supply wiring, batteries, or unknown prior modifications should be handled by a qualified gate operator technician. Do not bypass monitored entrapment protection, alarm functions, fuses, grounding, warning devices, or operator control safeguards.
Product Q&A
What is Genie GE-113442.0001.S used for?
Genie GE-113442.0001.S is a UL325 gate operator buzzer service part used with select Genie gate operator repairs where the parts diagram lists 113442.0001.S.
Is GE-113442.0001.S a control board?
No. GE-113442.0001.S is the audible buzzer component. The logic board and motor drive PCB are separate Genie service parts and should not be treated as the same item.
Does this buzzer replace a photo eye or safety edge?
No. The buzzer does not replace monitored photo eyes, monitored safety edges, loop detectors, or any required entrapment-protection device.
Why is my Genie gate operator buzzer sounding?
A sounding buzzer may indicate an active alarm, safety, reset, or operator fault condition. Check the operator status, monitored safety devices, reset button, wiring, and fault information before replacing the buzzer.
Which Genie operators use this UL325 buzzer?
This buzzer appears in select Genie gate operator service parts diagrams, including GLA24V, GRSW24V, and GRSL24V documentation. Always confirm fitment by the installed model and parts diagram before ordering.
Does this part include wiring or mounting hardware?
Package contents must be confirmed before ordering. Treat this item as the buzzer only unless wiring, connector, bracket, screws, gasket, harness, or mounting hardware is specifically listed.
What should I check before replacing the UL325 buzzer?
Check the part number, buzzer wiring, connector, logic board output, reset button, monitored safety inputs, operator fault status, enclosure moisture, corrosion, rodent damage, and whether the buzzer is responding to an active alarm condition.
