HySecurity MX5101-04 SlideDriver II SD200V Electrical Enclosure Assembly Details
The HySecurity MX5101-04 is an electrical enclosure assembly used in select Nice HySecurity SlideDriver II SD200V gate operator applications. It supports the operator's control and power compartment where the current parts diagram calls for this assembly.
This enclosure is tied to 3PH, 208-230VAC. It should not be selected for another SlideDriver II model, phase, voltage, DC, UPS, or export configuration unless HySecurity documentation confirms the same part number.
What This Part Does
The electrical enclosure assembly houses or supports control and power components such as controller hardware, wiring harnesses, terminals, contactors, power supply components, grounding points, labels, and covers depending on the current package configuration.
- Replacement electrical enclosure assembly for a specific SlideDriver II configuration
- Supports control and power components inside the operator
- Helps maintain proper mounting, wiring layout, and service access
- Should be matched by model, phase, voltage, and serial information
- Used after damage from water, heat, impact, or component-mounting failure when confirmed
Compatible With
This assembly may be used with select HySecurity SlideDriver II SD200V applications where the current parts diagram lists MX5101-04.
- Select HySecurity SlideDriver II SD200V applications
- 3PH, 208-230VAC configurations where MX5101-04 is specified
- Repairs where the original enclosure assembly is marked or cross-referenced as MX5101-04
- Applications with matching controller generation, harness layout, and power component arrangement
Important Compatibility Warning
Do not confuse MX5101-04 with MX5100-02 and MX5101-01. SlideDriver II enclosures vary by model size, phase, voltage, controller generation, harness routing, and included components.
If the enclosure was damaged by water, heat, surge, insects, loose wiring, or a failed component, diagnose the cause before installing the replacement assembly.
Comparison With Similar Parts
| Part / Item |
Typical Use |
Interchange Caution |
| MX5101-04 |
Electrical enclosure assembly for SD200V 3PH, 208-230VAC |
Correct where the parts diagram lists MX5101-04 |
| MX5100-02 |
SD15 and SD40 1PH enclosure |
Related smaller-model assembly, not automatically the same |
| MX5101-01 |
SD50F and SD80V 1PH 208-230VAC enclosure |
Different from SD15/SD40 and SD200V 3PH versions |
| MX5101-04 |
SD200V 3PH 208-230VAC enclosure |
Different phase/model configuration |
Similar Parts That Are Not Automatically Interchangeable
- MX5100-02, MX5101-01, or MX5101-04 unless the part number exactly matches the application
- DC or UPS enclosure assemblies
- Older SlideDriver electrical enclosures from different generations
- Generic electrical boxes
- Controller boards, contactors, power supplies, or wiring harnesses sold separately
Not Intended For
- Replacing an enclosure without diagnosing water, heat, or surge damage
- Use on unsupported SlideDriver II models
- Use on SwingSmart, SlideSmart, StrongArm, HydraSwing, or barrier operators unless documentation confirms it
- High-voltage service by unqualified personnel
- Bypassing safety inputs, fuses, disconnects, grounding, or entrapment protection
Features and Specifications
| Specification |
Details |
| Manufacturer |
HySecurity / Nice HySecurity |
| Part Number |
MX5101-04 |
| Product Type |
Electrical enclosure assembly |
| Operator Family |
SlideDriver II |
| Model Application |
SD200V |
| Phase / Voltage |
3PH, 208-230VAC |
| Assembly Area |
Electrical/control enclosure area |
| Package Contents |
Verify whether enclosure, covers, mounted components, harnesses, labels, and hardware are included |
Also Known As / Related Part Numbers
- MX5101-04
- Hy-MX5101-04
- HySecurity MX5101-04
- Nice HySecurity MX5101-04
- SD200V electrical enclosure assembly
- SlideDriver II SD200V enclosure
Related Parts and Service Checks
- Confirm the operator model and serial number
- Confirm phase and incoming voltage
- Inspect controller, harnesses, terminal blocks, fuses, contactors, and power supply components
- Check for water, heat, insect, corrosion, surge, or impact damage
- Verify all safety devices and inputs after service
Technician Note
Electrical enclosure assemblies are not generic boxes. The harness layout, power component arrangement, grounding, and controller support must match the exact operator configuration.
Before Ordering Checklist
- Confirm required part number MX5101-04
- Confirm operator model is SD200V
- Confirm phase and voltage are 3PH, 208-230VAC
- Confirm the current parts diagram lists this enclosure
- Confirm included components before ordering
- Document wiring before removal
- Test operator function and safety devices after replacement
Installation and Service Notes
Disconnect and lock out power before servicing the enclosure. Label wiring before removal. High-voltage gate operator work should be performed by a qualified gate technician or electrician. After installation, test limits, inputs, outputs, loops, access control, and safety devices.
Professional Advisory
Do not bypass fuses, disconnects, monitored entrapment devices, photo eyes, safety edges, grounding, or controller protections to keep the operator running. Unsafe wiring or voltage issues should be corrected before continued use.
Product Questions & Answers
What is the HySecurity MX5101-04 used for?
The HySecurity MX5101-04 is a electrical enclosure assembly used in select SlideDriver II SD200V applications where the current HySecurity parts documentation confirms this part number.
Does MX5101-04 fit every HySecurity operator?
No. HySecurity parts are model, generation, voltage, phase, and configuration sensitive. Verify the operator model, serial number, and current parts diagram before ordering.
What is the biggest ordering mistake with MX5101-04?
The biggest mistake is ordering the wrong enclosure by appearance instead of matching model, phase, voltage, controller generation, harness layout, and current parts diagram.
Should related parts be checked before replacing MX5101-04?
Yes. Check related wiring, harnesses, hydraulic components, sensors, mechanical load, controller faults, and safety inputs as applicable before replacing the part.
Can MX5101-04 be installed by a homeowner?
This part is intended for qualified gate technicians or properly trained service personnel, especially when the repair involves high voltage, hydraulics, controller wiring, or commercial gate safety systems.
Can safety devices be bypassed during troubleshooting?
No. Do not bypass photo eyes, safety edges, loops, emergency access, fire access, monitored entrapment devices, disconnects, or operator safety circuits to make the gate run.
