LiftMaster 02110C NEMA 1 Key Switch with STOP Button Technical Details
The LiftMaster 02110C is a NEMA 1 indoor flush mount key switch/control station for select LiftMaster industrial door operator applications. It uses a steel back box with architectural aluminum faceplate and is described as tamperproof. The cylinder configuration for this version is customer supplied cylinder for LiftMaster factory installation.
This product is commonly selected when a keyed control point is needed near a commercial overhead door or industrial operator. Match the exact part number, enclosure type, cylinder style, control action, and STOP-button requirement before ordering.
What This Part Does
The 02110C sends keyed open and close commands using OPEN/CLOSE spring return to center OFF. This version includes a STOP button. Allows complete control of the door when used with a compatible liftmaster industrial operator control circuit.
- OPEN/CLOSE spring return to center OFF
- Key removable in center OFF position only
- STOP button included for local stop control
- Indoor flush mount NEMA 1 configuration
- customer supplied cylinder for LiftMaster factory installation
Compatible With
May be used with select LiftMaster industrial operators when the control circuit and wiring type match the application. These key switches are commonly associated with LiftMaster commercial and industrial door operator accessory stations, but they should always be matched to the operator wiring diagram and required control type.
- Select LiftMaster industrial door operators
- Commercial overhead door operator control circuits
- Applications requiring the listed NEMA enclosure rating
- Sites where the cylinder/keying style matches the facility requirement
- Installations where the control function matches the operator wiring type
Important Compatibility Warning
Because this version includes a STOP button, it is commonly selected when a key-operated open/close station also needs local stop control at the station.
Do not order by appearance alone. LiftMaster key switch stations can look similar while using different NEMA ratings, mounting styles, cylinders, STOP-button layouts, and contact behavior. A no-stop open/close key switch is not the same as a STOP-button station, and a maintained ON/OFF switch is not the same as a momentary open/close station.
Comparison With Similar LiftMaster Key Switches
| Part / Family |
Control Type |
Mounting / Rating |
STOP Button / Caution |
| 02110C |
NEMA 1 |
Indoor flush mount |
Yes |
| 02109 family |
NEMA 1 |
Indoor flush mount |
No |
| 02405 / 02410 family |
NEMA 4/12 |
Outdoor surface mount |
Yes |
| 02404 / 02409 family |
NEMA 4/12 |
Outdoor surface mount |
No |
Similar Parts That Are Not Automatically Interchangeable
- Indoor NEMA 1 key switches versus outdoor NEMA 4/12 key switches
- Flush-mount stations versus surface-mount stations
- STOP-button versions versus no-stop versions
- Momentary open/close versions versus maintained ON/OFF versions
- Standard cylinder, Best cylinder, U-Change-It cylinder, and customer supplied cylinder versions
- MMTC or other branded control stations that may cross-reference but use different enclosures or keying
Not Intended For
- Bypassing photo eyes, sensing edges, door interlocks, emergency stop controls, or required safety circuits
- Replacing a different key switch without checking the wiring diagram and control function
- Residential garage door openers unless the operator documentation specifically calls for this type of commercial control station
- High-voltage repair work by unqualified personnel
- Outdoor use when the selected part is an indoor NEMA 1 model
Features and Specifications
| Specification |
Details |
| Brand |
LiftMaster |
| Part Number |
02110C |
| Store Item ID |
LM-02110C |
| Product Type |
Commercial / industrial door key switch control station |
| Mounting Style |
Indoor flush mount |
| NEMA Rating |
NEMA 1 |
| Environment |
Indoor |
| Enclosure / Faceplate |
steel back box with architectural aluminum faceplate |
| Tamper Style |
Tamperproof |
| Cylinder / Keying |
customer supplied cylinder for LiftMaster factory installation |
| Control Action |
OPEN/CLOSE spring return to center OFF |
| STOP Button |
Included |
| Key Removal |
Center OFF position only |
| Typical Application |
allows complete control of the door when used with a compatible LiftMaster industrial operator control circuit |
| Package Contents |
Key switch/control station assembly only unless current supplier packaging states otherwise |
Also Known As / Related Part Numbers
- 02110C
- LM-02110C
- LiftMaster 02110C
- 02110
- 02110U
- 02109 family
- NEMA 1 key switch with STOP button
Related Parts and Service Checks
- Check the existing key switch part number before replacement.
- Confirm whether the job needs open/close only, open/close with STOP, or maintained ON/OFF control.
- Verify the operator control wiring type and terminal layout before connecting the station.
- Confirm the required NEMA enclosure rating for the mounting location.
- Check cylinder/keying requirements before selecting standard, Best, U-Change-It, or customer supplied cylinder versions.
- Inspect stop circuits and safety devices before returning the operator to service.
Technician Note
The most common ordering mistake with these LiftMaster key switches is matching the enclosure but missing the control function. Before replacing the station, confirm whether the old unit has a STOP button, whether the contacts are momentary or maintained, and whether the operator requires Type D constant-pressure control wiring.
Before Ordering Checklist
- Confirm the exact part number is LiftMaster 02110C.
- Confirm the required mounting style is indoor flush mount.
- Confirm the enclosure rating is NEMA 1.
- Confirm the cylinder/keying style is customer supplied cylinder for LiftMaster factory installation.
- Confirm whether the application requires a STOP button.
- Confirm the operator wiring diagram and control station function.
- Confirm that safety devices and required stop controls will remain properly installed and functional.
Installation and Service Notes
Wiring should be performed by a qualified commercial door, gate, or low-voltage technician when the control circuit is not clearly identified. Follow the operator wiring diagram and the accessory instructions for terminal connections, contact behavior, stop circuit wiring, and enclosure mounting.
Do not use a key switch to bypass photo eyes, sensing edges, door safety devices, fire access, emergency access, operator stop circuits, or other required safety systems. If the door or gate moves unexpectedly, stop testing and have the control circuit checked before placing the operator back in service.
Professional Advisory
Commercial door and industrial operator controls should be selected by function first and appearance second. A similar-looking key switch may not be correct if the wiring type, STOP-button requirement, NEMA rating, cylinder system, or contact action is different. South Florida customers may also confirm Hialeah Gardens local pickup availability before scheduling a service call or installation.
Product Questions and Answers
Is the LiftMaster 02110C compatible with all LiftMaster industrial operators?
It may be used with select LiftMaster industrial operators when the control wiring and station function match the operator requirements. Verify the control type, NEMA rating, STOP-button requirement, and wiring diagram before ordering.
Does the LiftMaster 02110C include a STOP button?
Yes. This model includes a STOP button for local stop control at the key station.
What does OPEN/CLOSE spring return to center OFF mean on the LiftMaster 02110C?
The key is turned to send the open or close command, then the switch returns to the center OFF position. On this model, the key is removable from the center position only.
Is the LiftMaster 02110C for indoor or outdoor mounting?
The LiftMaster 02110C is a indoor flush mount NEMA 1 key switch. Confirm the enclosure rating and mounting style before replacing a different NEMA 1, NEMA 4, or NEMA 4/12 station.
What cylinder style does the LiftMaster 02110C use?
This model uses customer supplied cylinder for LiftMaster factory installation. Do not substitute another cylinder version unless the site keying requirement and part number are confirmed.
Can the LiftMaster 02110C replace a no-stop key switch?
Not automatically. The STOP-button model may require different wiring or a different station function than a no-stop key switch. Compare the old part number and wiring diagram before replacing it.
What should be checked before installing the LiftMaster 02110C?
Check the operator wiring diagram, control voltage, enclosure rating, mounting location, cylinder/keying requirement, stop circuit, and door safety devices before installation. Have a qualified technician handle unclear wiring.
